

zł132.44 tax excl.
WiFi/BLE module that supports both the 2.4 GHz and 5 GHz WiFi bands, as well as Bluetooth Low Energy (BLE 4.2) communication. It has a built-in chip antenna and 2.54 mm pitch connectors, which greatly facilitate prototyping. Tibbo WA2000C
WiFi/BLE module in the form of a small board with a convenient connector with a 2.54 mm pitch to facilitate prototyping. It supports support for both the 2.4 GHz and 5 GHz bands according to 802.11abgn standards, and thanks to Bluetooth Low Energy (BLE 4.2) technology, it offers not only wide communication capacity, but also low energy consumption, which increases the efficiency of your projects. The WPA/WPA2 encryption used guarantees communication security, and the built-in chip antenna and the operating temperature range from -40 to 85°C make the module ready for various environmental conditions.
Thanks to the device's Flash memory storing configurations and the ability to update the software from the Tibbo BASIC/C application or over the air (OTA), you gain flexibility in managing and maintaining the module. Easy configuration is the key to success, which is why WiFi/BLE module works with the L.U.I.S. application. available for iOS and Android. This intuitive application allows you to conveniently configure host devices using HTML5 via the BLE interface. A status LED indicating the connection and a connector with a standard 2.54 mm pitch are elements that facilitate monitoring and integration of the module in your projects.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Set of 40 pieces of male-female connection cables, in various colors, 17 cm long. CAB_M-F (Rainbow-40-17)
A set of 40 female-female connection cables, in various colors, 17 cm long. CAB_F-F (Rainbow-40-17)
Bluetooth module v2.0 + EDR, controlled by AT + commands with built-in antenna.
Adafruit 2267 - Bluefruit LE Friend - Bluetooth Low Energy (BLE 4.0) - nRF51822
ModCC2540-A1 allows the use of Bluetooth transmission features BLE 4.0 - thanks to the built-in CC2540 chip, it is possible to create complex projects without the use of an additional microcontroller. modCC2540-A1
A module that combines GSM/GPRS/GNSS and BT 3.0 technologies. It is available in a small, easy to solder LCC housing and has a low power consumption up to 1.2 mA. Quectel MC60CA
Evaluation kit with Bluetooth 5.0 Sparkfun Artemis module. Equipped with a microphone, kmaers and accelerometer. SparkFun DEV-16828
Bluetooth 4.0 module based on the CSR8635 chip designed for Bluetooth audio applications. The module has a built-in antenna and pins for edge connectors.
The Pmod BLE module is a Bluetooth module with powerful capabilities. Thanks to communication via the UART port, the module can be connected to any platform equipped with this interface. The module is equipped with the Roving Networks RN4870 system, in which a full Bluetooth interface is built-in. Digilent 410-359
Bluetooth module with built-in CC2541 chip. The module is small, energy-saving and easy to use
Bluetooth 4.0 BLE module powered with 3.3V voltage based on SOC TI CC2541 (On Chip). The module has a range of up to 10m and communicates via the UART interface.
An integrated module combining WiFi, Bluetooth 4.0 and FM radio. It has derived SDIO, UART and PCM interfaces. Ampak AP6335
Intel\'s AX200 wireless communication module. It supports the 802.11AX Wi-Fi Generation 6 standard and Bluetooth 5.2, and features an M.2 A/E Key with NGFF interface. Waveshare Wireless-AX200
Bluetooth module v2.0 + EDR (master / slave), controlled by AT + commands with built-in antenna.
No product available!
Board with the Artemis chip, the GNSS ZOE-M8Q module and the Iridium 9603N satellite receiver. It allows you to send and receive short messages with data anywhere in the world. SparkFun WRL-18712
No product available!
BLE Beacon, which emits Bluetooth Low Energy signals, enabling discovery by Bluetooth devices such as smartphones or ESP32 without the need for pairing. With a built-in I2C interface and an 11-bit ADC, it allows data collection from various sensors, and its low power consumption (650nA in sleep mode) ensures long-lasting operation on a single battery, ideal for applications requiring mobility and long range. DFRobot TEL0168
WiFi/BLE module that supports both the 2.4 GHz and 5 GHz WiFi bands, as well as Bluetooth Low Energy (BLE 4.2) communication. It has a built-in chip antenna and 2.54 mm pitch connectors, which greatly facilitate prototyping. Tibbo WA2000C