Fingerprint reader module with capacitive sensor. It uses an efficient processor and the IDfinger6.0 algorithm. It ensures quick identification and stability of operation, communicates via the UART interface. DFRobot SEN0348

Module with 17x7 LED matrix display (119 LEDs) designed to work with the Raspberry Pi. It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM333

Monochrome OLED display with a diagonal of 0.91" and a resolution of 128x32 pixels. The display has a built-in SSD1306 controller, communication via the I2C interface. DFRobot DFR0647

C-Mount lens. 8mm focal length, FoV 58.4° (H) x 44.6° (V), manual focus and adjustable aperture. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN043

C-Mount lens and C-CS adapter. 2.8-12 mm focal length variable, FoV 125° (H), 43° (H), manual focus and adjustable aperture. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN049

IPS LCD display with a diagonal of 7" and a resolution of 1024x600 pixels, equipped with a capacitive touch panel. Communicates via the LVDS interface. With a mounting frame. Riverdi RVT70HSLFWCA0

Module with 32 12 V relays with a maximum switching current of 7 A. It communicates via the USB interface. Numato Lab RL320001

IPS LCD display with a diagonal of 7" and a resolution of 1024x600 pixels, equipped with a capacitive touch panel. Communicates via the RGB interface. Riverdi RVT70HSTNWC00

Module with 3-axis accelerometer and ISM330DHCX gyroscope. Equipped with a Qwiic connector, it communicates via the I2C or SPI interface. SparkFun SEN-19764

Data logger dedicated to Thing Plus tiles. It allows you to save data on a microSD card with the possibility of reading through the USB port. Supports cards up to 32 GB. SparkFun DEV-19217

The Lanberg AC1200 mini USB 3.0 wireless card offers high performance and stability in the 802.a/b/g/n/ac standards, operates at 2.4 GHz and 5 GHz frequencies, providing speeds several times higher than the N standard, lower noise and compatibility with the latest routers and access points; It\'s perfect for online gaming, 4K streaming and more, thanks to its compact design and internal antennas.

Module with a 3-axis ADXL343 accelerometer with a configurable measuring range of ±2g/±4g/±8g/±16g. Equipped with a STEMMA QT connector, it communicates via the I2C or SPI interface. Adafruit 4097

Lanberg\'s power distribution unit (PDU), designed for horizontal installation in 19inch server racks, offers a single-phase power input, advanced protections including overload protection and current path shutters, and redundant cable cross-section, which guarantees stable and continuous operation, ideal for professional server environments.

A set with a 64 MP camera and an adapter enabling the transmission of the CSI signal via an HDMI cable. Designed for Raspberry Pi and Jetson Nano minicomputers. The adapter module is also equipped with an audio connector and allows you to connect a microphone and headphones. ArduCAM B0399B0091

The PRT-3000W voltage converter allows for the conversion of voltage from 230V to 110V and from 110V to 230V, enabling the powering of electrical devices from various regions of the world. Equipped with two output sockets, an input voltage switch, and an ON/OFF switch, it offers a power output of 3000W and a portable design with a rubber handle.

Module with a 64 MP camera designed for Raspberry Pi minicomputers. Equipped with autofocus and 10x digital zoom. ArduCAM B0399

Stereo audio amplifier with Bluetooth 4.2 communication. It can be powered with the voltage from 19 to 24 V and has two outputs with a power of 80 W

Audio amplifier with three output channels. It can be powered with the voltage from 5 to 26 V and has two outputs with a power of 50 W (left and right) and one with a power of 100 W (bass). Equipped with Bluetooth 5.0 communication. XY-S100L

Camera with a USB interface with a resolution of 16 MPx in a metal housing. Equipped with a Sony CMOS IMX298 sensor and a wide-angle lens with a viewing angle of 105°. ArduCAM B026801