Roof-mount LTE MIMO antenna designed for use with compatible Teltonika Networks routers and devices. It supports frequency ranges of 698-960 MHz and 1710-2690 MHz, while two 3 m RG174 cables are terminated with SMA Male connectors. The housing has an IP65 ingress protection rating, excluding the cable outlet, and is UV resistant. Teltonika PR1KCL25

AVR, 2kB Flash, 128B RAM, 128B EEPROM, DIP20, RoHS

DIP socket, 24-pin, precision, pitch 2,54mm, spacing 15,24mm, RoHS DIP24 PREC.

AVR, 32kB Flash, 2kB RAM, 1kB EEPROM, TQFP44, RoHS

BME680 environmental sensor module for measuring temperature, humidity, atmospheric pressure, and parameters used for air quality assessment. It communicates over I2C at address 0x76 and features two Qwiic connectors for integration with compatible boards. The breakout supports 3.3V and 5V power supplies. Soldered 333035

BME280 environmental sensor module for measuring temperature from -40 to 80°C, relative humidity from 0 to 100%, and atmospheric pressure from 30 to 110kPa. It communicates via I2C at address 0x76 and features two Qwiic connectors. The board supports 3.3V and 5V power supplies. Soldered 333036

Real-time clock module based on the PCF85063A IC for independent timekeeping and date tracking. It communicates via I2C at a fixed 0x51 address and provides an alarm function, INT interrupt output, and programmable clock output. An onboard battery holder maintains timekeeping when the main power supply is disconnected. Soldered 333051

Single individually addressable WS2812B RGB LED in a 5050 package, mounted on a circular 10mm diameter board. Color is controlled digitally through a single signal line, while the operating voltage is 5V. The manufacturer specifies a maximum current consumption of 60mA per pixel. Soldered 333054

AVR, 16kB Flash, 1kB RAM, 512B EEPROM, TQFP44, RoHS

AVR, 128kB Flash, 4kB RAM, 4kB EEPROM, 2xUART, PWM, SPI, ADC, TQFP64, RoHS

VL53L1X-based ToF laser distance sensor providing a measurement range from 30mm to 4m at ranging rates up to 50Hz. It uses invisible 940nm infrared light, communicates via I2C, and provides an adjustable 15–27° field of view. Qwiic connectors simplify connection to compatible boards. Soldered 333064

Breakout board with a female 3.5mm Jack connector providing access to four connections: ground, right audio channel, left audio channel, and microphone. The exposed pins simplify connecting headphones, headsets, and other audio devices to prototype circuits. Soldered 333088

DIP base, 24-pin, precision, pitch 2.54mm, spacing 7.62mm, RoHS

16-bit ADS1115 analog-to-digital converter module with four single-ended inputs or two differential inputs. It communicates via I2C and features a programmable gain amplifier (PGA) for adjusting the measurement range to the input signal level. Designed for precise analog signal acquisition in microcontroller-based systems. Soldered 333095