Pololu 1353 – Mini Maestro 12-channel USB servo controller

Pololu Mini Maestro 1355 is a servo controller with 18 configurable channels, designed for precise applications in robotics, automation, and animatronics. The kit version allows customization of connector installation to suit project needs, while its extensive functionality enables the creation of autonomous control systems and expansion of input/output interfaces in embedded systems.

Servo driver based on the Raspberry Pi RP2040 microcontroller. It allows you to control up to 18 servos, has 6 analog inputs and a QW/ST connector for connecting additional sensors. Pimoroni PIM613

The motor driver card can drive 24 servo motors at most. It can be used to drive a multiple-joint robot machine, such as Hexapod Robot, Biped Robot, and Arm Robot. P0288

Adafruit 16-Channel PWM / Servo HAT for Raspberry Pi - Mini Kit (Adafruit 2327)

This module supports four servos with direct power supply ranging from 5-17V, allowing for the construction of high-power designs. The module features standard servo connectors and two analog inputs that can be used to interface with sensors or servos with feedback. Pimoroni PIM695

With this smart arduino digital servo shield and Dynamixel AX series servos, It\'s quite easy for you to drive multi servos with daisy chain connection with an Arduino board  such as Arduino Uno, and build your robotic dog, hexapod with powerful servos. DRI0027

Servo control module with 180 degree range of motion, No programming required and is ideal for operations such as opening and closing the mouth, hands or eyes. Control is performed using the built-in ATTiny13A, button and potentiometer, and each pressed button moves the servo to the other end of the range, with the possibility of adjusting the length of the movement. Kitronik 2177

Servo control module. The operating parameters are configured by means of potentiometers placed on the board. SparkFun WIG-13118

An expansion board for the BBC micro:bit, allowing easy connection and control of low-power servos. It supports two servos by default, and up to three by disabling the built-in ZIP LEDs. Powered by three AAA batteries, it simultaneously supplies power to the micro:bit, while a power switch protects against unnecessary discharge. With five RGB ZIP LEDs and the ability to connect additional ones, the board allows for attractive lighting effects and is ideal for robotic projects like the :MOVE mini. Kitronik 5623

A compact servo controller based on the PCA9685 chip, allowing simultaneous control of up to 16 RC servos. The board features a built-in Edge Connector for direct connection to the micro:bit and Link-compatible pads for easy integration with other modules. Power can be supplied via the terminal block or servo connectors, and a built-in switch and LED simplify operation. The controller provides a stabilized 3.3V output for the micro:bit and additional devices, making it a perfect central module in your project. Kitronik 5694

Module with a 16-channel PWM PCA9685 driver. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 108020102

Universal tester of servos and ESC regulators. It allows you to check the operation of the servo without the need for a transmitter and receiver

This module enables the Feather series range to be expanded with 8 12-bit PWM outputs that can be used, for example, to control servos or LED diodes. Adafruit 2928

Mini Maestro 24 (kit) is a flexible controller for advanced applications with multiple servos, offering sophisticated motion control, signal reading, and autonomous operation capabilities. It is ideal for use in robotics, animatronics, and embedded systems as a precise controller and input/output expander.

The 8-channel servomechanism controller with potentiometers is a versatile device that allows you to control many servomechanisms at the same time. With a wide voltage range and resistance to extreme temperatures, it is an ideal solution for robotics projects and remote-controlled applications.