 
        
           
        
           
         
           
           
          zł18.30 tax excl.
Servo control module with 180 degree range of motion, No programming required and is ideal for operations such as opening and closing the mouth, hands or eyes. Control is performed using the built-in ATTiny13A, button and potentiometer, and each pressed button moves the servo to the other end of the range, with the possibility of adjusting the length of the movement. Kitronik 2177
Servo control module with a movement range of 180 degrees. It requires no programming and is an ideal solution for operations such as opening and closing mouths, hands, eyes, and other movable elements. The module allows power supply and control of a single servo using a built-in ATTiny13A chip, a potentiometer, a 3-pin servo connector, and a button. With each press of the button, the servo moves to the opposite end of its range, and the length of the movement can be adjusted via the potentiometer. The board also includes solder pads for +5V/GND power supply, as well as pads for connecting an external button in parallel with the built-in PCB switch. This allows an external button to be mounted in a convenient location on the case, making operation easier.
Additionally, the module features a 5V USB power socket. It is important to note that the servo can draw more than 500 mA of current, so the module must be powered by a sufficiently capable power source. It is not recommended to power the module directly from a laptop or computer. The potentiometer is adjusted using a small screwdriver, and the servo is connected to the module via a standard 3-pin servo connector located at the top of the board.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Power HD Micro Digital Servo DS65HB
Standard analog servo equipped with a plastic gear. It is characterized by quite high durability and strength. SparkFun ROB-11884
 No product available!
An expansion board for the BBC micro:bit, allowing easy connection and control of low-power servos. It supports two servos by default, and up to three by disabling the built-in ZIP LEDs. Powered by three AAA batteries, it simultaneously supplies power to the micro:bit, while a power switch protects against unnecessary discharge. With five RGB ZIP LEDs and the ability to connect additional ones, the board allows for attractive lighting effects and is ideal for robotic projects like the :MOVE mini. Kitronik 5623
Universal tester of servos and ESC regulators. It allows you to check the operation of the servo without the need for a transmitter and receiver
 No product available!
With this smart arduino digital servo shield and Dynamixel AX series servos, It\'s quite easy for you to drive multi servos with daisy chain connection with an Arduino board such as Arduino Uno, and build your robotic dog, hexapod with powerful servos. DRI0027
 No product available!
Pololu Micro Maestro 1350 is a compact, versatile servo controller with a USB interface and autonomous operation capability, designed for use in robotics, animatronics, and control systems based on PCs or microcontrollers. Thanks to its flexible channel configuration, it can also be used as a sensor interface and I/O expander.
Servo control module. The operating parameters are configured by means of potentiometers placed on the board. SparkFun WIG-13118
 No product available!
A compact servo controller based on the PCA9685 chip, allowing simultaneous control of up to 16 RC servos. The board features a built-in Edge Connector for direct connection to the micro:bit and Link-compatible pads for easy integration with other modules. Power can be supplied via the terminal block or servo connectors, and a built-in switch and LED simplify operation. The controller provides a stabilized 3.3V output for the micro:bit and additional devices, making it a perfect central module in your project. Kitronik 5694
Servo driver with UART serial interface. Equipped with an ESP32 module with WiFi and Bluetooth wireless communication. Waveshare Servo Driver with ESP32
The PCA9685 servo driver module is dedicated to Raspberry Pi minicomputers. It allows you to control 16 PWM channels. SB Components 08957
The motor driver card can drive 24 servo motors at most. It can be used to drive a multiple-joint robot machine, such as Hexapod Robot, Biped Robot, and Arm Robot. P0288
Pololu Micro Maestro 1351 in kit version enables precise and flexible control of servos and sensors from a PC or microcontroller. Thanks to its ability to operate autonomously and function as a USB–TTL interface, it is used in motion control systems, animatronic projects, and interactive systems responding to external stimuli.
 No product available!
HAT module with the PCA9685 server driver designed for Raspberry Pi minicomputers. The board is equipped with a 40-pin connector. Adafruit 3416
The expansion module is designed to work with the micro:bit educational board. It can control 3 servos and 2 DC motors. Waveshare Motor Driver for micro:bit
Universal tester of servos and ESC regulators. It allows you to check the operation of the servo without the need for a transmitter and receiver
 No product available!
Advanced servo controller with UART and USB communication, enabling precise control of multiple servos simultaneously. Compact design and stable power supply via screw connector make the device ideal for integration in robots and automation systems with limited space. Cooperation with the Seeed Studio XIAO ecosystem and the use of serial bus instead of traditional PWM provide efficient, scalable and reliable control in educational, research and DIY projects. Seeed Studio 105990190
The expansion module is designed to work with micro:bit. It allows you to control 4 DC motors or two stepper motors and 8 servos. It communicates via the I2C interface. DFRobot DFR0548
 
                    Servo control module with 180 degree range of motion, No programming required and is ideal for operations such as opening and closing the mouth, hands or eyes. Control is performed using the built-in ATTiny13A, button and potentiometer, and each pressed button moves the servo to the other end of the range, with the possibility of adjusting the length of the movement. Kitronik 2177