8 Channel Servo Controller - 8 channel servo controller
ID: 578523
5906623405336
zł74.96
Tax included
zł60.94 tax excl.
Module with 8-channel servo driver. It allows you to control the speed of movement and the initial position of the servo. Cytron SC08A
Description
Module with 8-channel servo driver. User can set the initial position of any channel on next startup. Each signal pin is capable of generating pulses from 0.5 ms to 2.5 ms, which allows the servo to operate over 180 degrees. The module is small in size, and thanks to the serial communication SC08A can be connected to each other and allows you to provide independent control of 16 RC servos simultaneously.
Features
- 8 channels
- Information about the position of a single servo
- Possibility to deactivate or activate any servo channel
- Configurable starting position of any channel
- Possibility to control the speed of the servo movement
- Resolution: 8000 steps = 0.25 us
- UART: speed 9600 bps
- Servo pulse range: 0.5ms to 2.5ms
- Dimensions: 49 x 46 mm
Kit contains
- SC08A module
- Connector 2510H-04 (with contacts)
- Connector 2561-04 (with contacts)
- Jumper
578523
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The FS90 analog servo from FEETECH is a great general-purpose micro servo at a great price. Servo horns and associated hardware are included.
Key specs at 6 V: 0.10 sec/60°, 21 oz-in (1.5 kg-cm), 9.0 g.
zł53.27
24h
Available quantity: 3
Available
No product available!
The board is compatible with Arduino, based on the ATmega328P microcontroller from the AVR family, 14 I/O lines, 6 PWM channels, 6 analog inputs are available to the user. The CH340G chip communicates via a USB interface. In addition, it has 12 LEDs, a programmable button and a embedded buzzer. Cytron Uno Maker
zł35.42
24h
Available quantity: 5
Available
Board compatible with Arduino, based on ATmega328P. Equipped with an area with prototype holes, a breadboard, 12 LEDs, a button and a buzzer. Cytron MAKER-UNO-X
zł57.75
24h
Available quantity: 2
Available
Other products in the same category (16)
The expansion module is designed to work with the micro:bit educational board. It can control 3 servos and 2 DC motors. Waveshare Motor Driver for micro:bit
zł44.28
24h
Available quantity: 1
Available
The servo driver module is an extension intended for minicomputers Raspberry Pi Zero / Zero W / Zero WH / 2B / 3B / 3B +. Allows you to control 16 PWM channels. Waveshare 15275
zł57.23
4 weeks
No product available!
Module with 8-channel servo driver. It allows you to control the speed of movement and the initial position of the servo. Cytron SC08A
zł74.96
24h
Available quantity: 2
Available
Module with 16-channel PCA9685 servo driver designed for Raspberry Pi minicomputers. The board is equipped with a USB Type C power connector. SparkFun DEV-15316
zł67.87
24h
Available quantity: 1
Available
Universal tester of servos and ESC regulators. It allows you to check the operation of the servo without the need for a transmitter and receiver
zł32.66
4 weeks
No product available!
Universal tester of servos and ESC regulators. It allows you to check the operation of the servo without the need for a transmitter and receiver
zł7.29
24h
Available quantity: 17
Available
Universal tester of servos and ESC regulators. It allows you to check the operation of the servo without the need for a transmitter and receiver
zł49.90
24h
Available quantity: 4
Available
Module with a 16-channel PWM PCA9685 driver. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 108020102
zł71.07
4 weeks
No product available!
16-channel servo driver module with I2C interface based on the PCA9685 system. modPCA9685
zł33.16
24h
Available quantity: 5
Available
Module with a 2-channel DC motor driver TB6612FNG designed to work with micro: bit. It can also control 3 servos. SB Components 14897
zł76.94
24h
Available quantity: 2
Available
Servo driver with UART serial interface. Equipped with an ESP32 module with WiFi and Bluetooth wireless communication. Waveshare Servo Driver with ESP32
zł69.25
24h
Available quantity: 10
Available
Servo driver based on the Raspberry Pi RP2040 microcontroller. It allows you to control up to 18 servos, has 6 analog inputs and a QW/ST connector for connecting additional sensors. Pimoroni PIM613
zł176.97
24h
Available quantity: 1
Available
The 8-channel servomechanism controller with potentiometers is a versatile device that allows you to control many servomechanisms at the same time. With a wide voltage range and resistance to extreme temperatures, it is an ideal solution for robotics projects and remote-controlled applications.
zł123.07
24h
Available quantity: 2
Available
Driver dedicated to servomechanisms equipped with a UART serial interface. It allows you to control up to 253 servos from the ST/SC series, which makes it an ideal solution for walking robots or manipulators projects. Waveshare Bus Servo Adapter (A)
zł19.35
4 weeks
No product available!
Servo control module with 180 degree range of motion, No programming required and is ideal for operations such as opening and closing the mouth, hands or eyes. Control is performed using the built-in ATTiny13A, button and potentiometer, and each pressed button moves the servo to the other end of the range, with the possibility of adjusting the length of the movement. Kitronik 2177
zł21.87
24h
Available quantity: 6
Available
A compact servo controller based on the PCA9685 chip, allowing simultaneous control of up to 16 RC servos. The board features a built-in Edge Connector for direct connection to the micro:bit and Link-compatible pads for easy integration with other modules. Power can be supplied via the terminal block or servo connectors, and a built-in switch and LED simplify operation. The controller provides a stabilized 3.3V output for the micro:bit and additional devices, making it a perfect central module in your project. Kitronik 5694
zł59.41
24h
Available quantity: 4
Available
Module with 8-channel servo driver. It allows you to control the speed of movement and the initial position of the servo. Cytron SC08A