Servo Trigger - a module for controlling a servo
ID: 557701
zł129.32
Tax included
zł105.14 tax excl.
Servo control module. The operating parameters are configured by means of potentiometers placed on the board. SparkFun WIG-13118
Description
Simple servo control module. The board is based on the ATTiny84 microcontroller, which controls the servo. The user has three potentiometers at his disposal to set the servo motion parameters: potentiometer A sets the servo position when the input is open, B when the input is closed, and potentiometer T sets the time needed to move from point A to point B and back. The module is powered with the voltage of 5 V. There is also an ISP connector at the user's disposal, which enables the ATTiny84 microcontroller to be reprogrammed and its operation adjusted to one's own needs. The guide with full documentation is available on the product page.
Features
- Recommended Voltage: 5VDC
- Max Voltage: 5.5VDC
- Current Draw: 5 mA
- Three Control Settings
- A - sets the position the servo sits in while the switch is open
- B - sets the position the servo moves to when the switch is closed
- C - sets the time it takes to get from A to B and back
- Easy Control with Potentiometers
- Configurable Input Polarity
- Configurable Response Mode
- Compatible with Analog Servos
- ISP Header pins Available for Reprogram
557701
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Standard analog servo equipped with a plastic gear. It is characterized by quite high durability and strength. SparkFun ROB-11884
zł191.55
Delivery date unknown
No product available!
The SparkFun Continuous Rotation (CR) Servo Trigger is a small robotics board that simplifies the control of hobby RC servo motors. You can use a hobby servo in your projects without having to do any programming! WIG-13872
zł100.54
Delivery date unknown
No product available!
A servo with standard sizes. At 6 V, it can generate a torque of up to 15.5 kg*cm. Additionally equipped with a potentiometer informing about the servo position. It has a standard 3-pin connector matching most popular modeling controllers and an additional servo position pin.
zł169.69
24h
Available quantity: 2
Available
Other products in the same category (16)
The SparkFun Continuous Rotation (CR) Servo Trigger is a small robotics board that simplifies the control of hobby RC servo motors. You can use a hobby servo in your projects without having to do any programming! WIG-13872
zł100.54
3 weeks
No product available!
The motor driver card can drive 24 servo motors at most. It can be used to drive a multiple-joint robot machine, such as Hexapod Robot, Biped Robot, and Arm Robot. P0288
zł455.10
24h
Available quantity: 1
Available
With this smart arduino digital servo shield and Dynamixel AX series servos, It\'s quite easy for you to drive multi servos with daisy chain connection with an Arduino board such as Arduino Uno, and build your robotic dog, hexapod with powerful servos. DRI0027
zł134.16
4 weeks
No product available!
HAT module with the PCA9685 server driver designed for Raspberry Pi minicomputers. The board is equipped with a 40-pin connector. Adafruit 3416
zł62.47
24h
Available quantity: 1
Available
The expansion module is designed to work with micro:bit. It allows you to control 4 DC motors or two stepper motors and 8 servos. It communicates via the I2C interface. DFRobot DFR0548
zł84.92
24h
Available quantity: 2
Available
The expansion module is designed to work with the micro:bit educational board. It can control 3 servos and 2 DC motors. Waveshare Motor Driver for micro:bit
zł44.28
24h
Available quantity: 1
Available
The servo driver module is an extension intended for minicomputers Raspberry Pi Zero / Zero W / Zero WH / 2B / 3B / 3B +. Allows you to control 16 PWM channels. Waveshare 15275
zł57.23
4 weeks
No product available!
Module with 8-channel servo driver. It allows you to control the speed of movement and the initial position of the servo. Cytron SC08A
zł74.96
24h
Available quantity: 2
Available
Module with 16-channel PCA9685 servo driver designed for Raspberry Pi minicomputers. The board is equipped with a USB Type C power connector. SparkFun DEV-15316
zł62.90
24h
Available quantity: 1
Available
Universal tester of servos and ESC regulators. It allows you to check the operation of the servo without the need for a transmitter and receiver
zł32.66
4 weeks
No product available!
Universal tester of servos and ESC regulators. It allows you to check the operation of the servo without the need for a transmitter and receiver
zł7.29
24h
Available quantity: 35
Available
Universal tester of servos and ESC regulators. It allows you to check the operation of the servo without the need for a transmitter and receiver
zł49.90
24h
Available quantity: 5
Available
Module with a 16-channel PWM PCA9685 driver. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 108020102
zł71.07
4 weeks
No product available!
16-channel servo driver module with I2C interface based on the PCA9685 system. modPCA9685
zł32.10
4 weeks
No product available!
Module with a 2-channel DC motor driver TB6612FNG designed to work with micro: bit. It can also control 3 servos. SB Components 14897
zł76.94
24h
Available quantity: 2
Available
Servo driver with UART serial interface. Equipped with an ESP32 module with WiFi and Bluetooth wireless communication. Waveshare Servo Driver with ESP32
zł67.53
4 weeks
No product available!
Servo control module. The operating parameters are configured by means of potentiometers placed on the board. SparkFun WIG-13118