

The servo controller is equipped with an ESP32 module. It can control the movement of servos with UART interface, eg SC15 or ST3215, and allows you to connect up to 253 drives on one bus. ESP32 provides communication via WiFi or Bluetooth wireless networks in the 5.0 standard, and also supports ESP-NOW, thanks to which the user can easily build a project controlled e.g. by a mobile application. The board has an OLED display and an interface for controlling RGB LEDs.
1. ESP32 | 7. Automatic download circuit |
2. UART servo interface | 8. RGB LED indicator |
3. OLED | 9. DC 5,5x2,1 mm |
4. BOOT | 10. RGB LED interface |
5. Reset | 11. PCB antenna |
6. USB typu C | 12. Serial bus servo controll circuit |
The ESP is programmed via the USB type C connector, and the module is powered with a voltage ranging from 6 to 12 V via a DC 5.5 x 2.1 mm connector. Full documentation is available on the product page.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Cable with USB typ A and USB typ C connectors, cable length 0.5 m. LANBERG
Cable with USB typ A and USB typ C connectors, cable length 1 m. LANBERG CA-USBO-10CC-0010-BK
Cable with USB typ A and USB typ C connectors, cable length 1,8 m. LANBERG CA-USBO-10CC-0018-BK
Programmable standard 17kg * cm servo controlled by UART interface. It can work in the rotation angle control mode or in the continuous operation mode. Waveshare SC15 Servo
Servo control module with 180 degree range of motion, No programming required and is ideal for operations such as opening and closing the mouth, hands or eyes. Control is performed using the built-in ATTiny13A, button and potentiometer, and each pressed button moves the servo to the other end of the range, with the possibility of adjusting the length of the movement. Kitronik 2177
The expansion module is designed to work with micro:bit. It allows you to control 4 DC motors or two stepper motors and 8 servos. It communicates via the I2C interface. DFRobot DFR0548
The SparkFun Continuous Rotation (CR) Servo Trigger is a small robotics board that simplifies the control of hobby RC servo motors. You can use a hobby servo in your projects without having to do any programming! WIG-13872
No product available!
No product available!
HAT module with the PCA9685 server driver designed for Raspberry Pi minicomputers. The board is equipped with a 40-pin connector. Adafruit 3416
Module with 8-channel servo driver. It allows you to control the speed of movement and the initial position of the servo. Cytron SC08A
Module with a 2-channel DC motor driver TB6612FNG designed to work with micro: bit. It can also control 3 servos. SB Components 14897
No product available!
Module with 16-channel PCA9685 servo driver designed for Raspberry Pi minicomputers. The board is equipped with a USB Type C power connector. SparkFun DEV-15316
Universal tester of servos and ESC regulators. It allows you to check the operation of the servo without the need for a transmitter and receiver
16-Channel 12-bit PWM/Servo Driver - I2C interface - PCA9685, RoHS
No product available!
The board generates 16 PWM signals and communicates using the digital I2C interface, it has a built-in PCA9685 chip. MOD 71
Servo driver with UART serial interface. Equipped with an ESP32 module with WiFi and Bluetooth wireless communication. Waveshare Servo Driver with ESP32