Integrated circuit - a distance sensor based on the technique of measuring the time between transmitting a light wave and returning its reflection (so-called Time of Flight - ToF). The system transmits data via the I2C bus and can measure distances up to 2 meters. The system has a small size and fits in the Optical LGA12 housing

32-bit microcontroller with ARM Cortex-M0 core, XMC1300, 64kB Flash, VQFN24, Infineon

AD7740KRMZ, 3V/5V Low Power, Synchronous Voltage-to-Frequency Converter, MSOP-8

32-bit microcontroller with ARM Cortex-M0 core, XMC1100, 64kB Flash, TSSOP-38, Infineon

32-bit microcontroller with ARM Cortex-M0 core, XMC1100, 32kB Flash, TSSOP-16, Infineon

32-bit microcontroller with ARM Cortex-M0 core, XMC1200, 32kB Flash, TSSOP-16, Infineon

Zynq-7000 All Programmable SoC, Dual ARM Cortex-A9 MPCore, Artix-7 FPGA, 85K Logic Cells, 256KB 667MHz CSPBGA400, Xilinx

The BME280 integrated circuit is a sensor of atmospheric conditions (pressure, humidity, temperature) in the SMD casing (2.5mmx2.5mm). The sensor has very low power consumption (average 3.6uA) and has an I2C / SPI bus. The Bosch Sensortec system

Step-Down DC-DC converter module based on the D24V150F12 chip. Input voltage 14.5 ... 40V, output voltage 12V (max 15A). Pololu 2885

This synchronous switching step-down (or buck) regulator takes an input voltage of up to 40 V and efficiently reduces it to 3.3 V with an available output current of around 15 A. Pololu 2880

Housing with black base. It serves as camera protection for Raspberry Pi V1 and V2. Adafruit 3253

This synchronous switching step-down (or buck) regulator takes an input voltage of up to 40 V and efficiently reduces it to 6 V with an available output current of around 15 A. Pololu 2882

Module with a light sensor based on the APDS-9002 system. With the aid of this system, it is possible to measure the intensity of illumination in lux. The module has a connector in accordance with the Grove standard. Seeed studio 101020076

Pin strip straight in red, single-row, extended, female, 1x8, pitch 2.54mm, THT, RoHS. PB08S L RED

Module with ultraviolet (UV) sensor based on the GUVA-S12D system. It allows measurement of radiation with a wavelength in the range from 240 to 370 nm. The module has a connector in accordance with the Grove standard. Seeed Studio 101020043

Module with a dust sensor PPD42NS. The board is equipped with a Grove cable and communicates via the PWM interface. Seeed Studio 101020012

Artix-7 FPGA, 33280 Logic Cells, 5200 Slices, 90 DSP Slices, CSPBGA325, Xilinx

Programmable time module with relay, allows you to set the time and manner of relay reaction on the trigger signal, has a built-in LED display. It can be supplied with voltage from the range of 6 - 30VDC or using the microUSB connector

32-bit microcontroller from the STM32F7 family with ARM Cortex-M7 core, 2MB Flash memory, 216MHz clock speed, DSP with FPU, Art accelerator, SDRAM, TFT, JPEG codec, DFSDM, 144LQFP, STM, RoHS