The Step-Down converter module converts the input voltage of 11 - 26 V to a constant 9 V, with a maximum output current of 3 A, recommended up to 1.1 A for long-term operation. The conversion efficiency of the device is 96% and the module size is 22.3 x 17 x 4.2 mm

The Step-Down converter module converts the input voltage of 14 - 26 V to a constant 12 V, with a maximum output current of 3 A, recommended up to 0.8 A for long-term operation. The conversion efficiency of the device is 96% and the module size is 22.3 x 17 x 4.2 mm

The S9V11F3S5CMA switching step-up/step-down regulator efficiently produces a fixed 3.3 V (default) or 5 V (selectable) output whether it is higher or lower than the input voltage, which can range from 2 V to 16 V. (Note: minimum start-up voltage is 3 V, but it operates to 2 V after that.)

Quectel RM520N-GL IoT module with M.2 connector. Supports communication within 5G, 4G and 3G networks and supports GNSS positioning within GPS, GLONASS, BDS and Galileo systems. Waveshare RM520N-GL

MIC5504-3.3YM5, Single Output LDO 3,3V 300mA, SOT23-5

Prototyping hole expander designed for Wemos D1 Mini boards. Allows you to extend the Wemos pins to additional connectors and connect expansion modules

Step-Up converter U3V70F7 with an output voltage of 7.5V, an input voltage from 2.9 to 7.5 V and a maximum output current of 10 A. Pololu 2893

Step-Up converter U3V70F15 with an output voltage of 15 V, an input voltage from 2.9 to 15 V and a maximum output current of 10 A. Pololu 2896

DC-AC converter, also referred to as an inverter. It converts a constant voltage (DC) of 12 V to an alternating voltage (AC) of 110 V, 200 V, 220 V or 280 V

Set 3: 1x Pocket Inverter + 1x cable splitter (1 to 5) + 5x yellow 1-meter El-wires

Set with white wires EL Wire. The set includes an inverter, a 1 to 5 branching and 5 EL Wire in white, 1m long.

Panel button, monostable, rectangular, dimensions 16 x 22 mm and SPDT contact configuration

7-segment LED display, 1 digit 13.20mm, red (635nm), 24 mcd/se (10mA), common cathode, Pb-free. LED1-AS-05219AMR-B PBF

The brakeless bidirectional speed controller (ESC) is an advanced brushed motor control device that offers up to 40 A continuous current and up to 340 A peak current, ensuring stable operation and dynamic load response. PPM signal control allows precise control of the motor speed and direction, while the radiator and XT60 connector ensure safe use and effective cooling.

High temperature measuring kit. It consists of a signal conversion module with a range of -270°C to 1372°C and a K-type thermocouple probe with a range of up to 800°C. I2C communication DFRobot DFR0558

Image sensor MT9M114 with a resolution of 1.26 MPx with built-in NXP LPC4330 processor. Designed for AI applications, it allows for color recognition, line detection and barcode detection. DFRobot SEN0265

Module with a deflection sensor with two measuring probes. The board houses the ADS1015 converter, which is an ADC converter with an output in the form of an I2C interface. SparkFun SEN-14666

DC motor driver with voltage 4.5..28V and maximum continuous current of 2.6A. It has the ability to easily implement the feedback loop and numerous control interfaces. Polol 3143

Step-Up converter U3V70A with an output voltage from 4.5 to 20 V, an input voltage from 2.9 to VOUT and a maximum output current of 10 A. Pololu 2890

The X-NUCLEO-IHM16M1 motor driver expansion board is based on the STSPIN830 monolithic driver for three-phase brushless motors. It represents an affordable, easy-to-use solution for driving brushless motors in your STM32 Nucleo project, implementing single and three-shunt current sensing