Category: Motors
Subcategories
There are 555 products.
A small motor with a metal gear ending with a shaft with M3 thread, rotation speed 60 RPM, operating voltage 6 V. GA1036-N20M-0054
Solarbotics GM8 143:1 Gear Motor Offset Output
Miniature, 12 V brush DC motor with metal gear and 15.25:1 gear ratio. It has a cross section of 10 × 12 mm, and the D-shaped output shaft with a length of 9 mm and a diameter of 3 mm. Pololu 4788
Motor with a diameter of 37 mm and a length of 76.5 mm, with a gearbox of 6.3:1, a working voltage of 12 V, a current consumption from 1.1 A to 6 A, a speed of 2300 RPM and a maximum torque of 2.1 kg*cm. JGB37-550
15:1 Micro Metal Gearmotor. Pololu 4782
Motor with 37 mm diameter and 65 mm length, 6,3:1 metal gear, 12 V operating voltage, 0,2 A to 5,5 A power consumption, 1600 RPM speed, 3 maximum torque and 64 CPR encoder. Pololu 4757
Miniature, 6V brush DC motor with metal gear and 15.25:1 gear ratio. It has a cross section of 10 × 12 mm, and the D-shaped output shaft with a length of 9 mm and a diameter of 3 mm. Pololu 4785
DC Micro motor module with metal gear with a gear ratio of 75:1. The motor is connected to the board containing the driver. DFRobot DFR0399
DC Micro motor module with metal gear with a gear ratio of 50:1. The motor is connected to the board containing the driver. DFRobot DFR0429
Metal Worm Gear Motor, 375 RPM Rotation Speed, 12V Working Voltage. JGY370-35
Aluminum bracket with holes for M3 screws for 37D mm gear motors. Pololu 1995
Bipolar stepper motor powered with a voltage of up to 12 V and a maximum current of 400 mA. SparkFun ROB-10551
Motor with 25 mm diameter and 56 mm length, 172:1 metal gear, 6 V operating voltage, 0,55 A to 6,5 A power consumption, 56 RPM speed and 25 maximum torque. Pololu 1577
These aluminum gearmotor brackets let you securely mount our larger Pololu plastic gearmotors (228:1 offset, 120:1 offset, 200:1 90-degree, and 120:1 90-degree) to your project. These brackets are sold in pairs, and each bracket comes with two 1″ long and two 0.75″ long #2-56 screws for securing different size motors.
High-power brushed DC motor, 120:1 reduction gearbox, intended for operation at 4.5 V, 9.7mm-long gearbox, 3 mm-diameter D-shaped output shaft that is offset from but parallel to the motor shaft, built-in safety clutch. Pololu 1512
High-power brushed DC motor with a 120:1 reduction gearbox, intended for operation at 4.5 V, 9.7mm-long gearbox, 3 mm-diameter D-shaped output shaft that is perpendicular to the motor shaft, and a built-in safety clutch. Pololu 1511
Small metal gear motor, 60 RPM speed, 6V operating voltage. GA12-N20-0013
This black anodized aluminum bracket lets you securely mount typical NEMA 17-size stepper motors to your project. The bracket features several slots and holes for a wide variety of mounting solutions, and four M3×6mm screws are included for securing the motor to the bracket. Pololu 2266
This gearmotor is a miniature high-power, 12 V brushed DC motor with long-life carbon brushes and a 100.37:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
Key specs at 12 V: 320 RPM and 100 mA with no load, 30 oz-in (2.2 kg-cm) and 0.8 A at stall.
This gearmotor is a miniature high-power, 12 V brushed DC motor with long-life carbon brushes and a 75.81:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.