Category: Expansion modules

The module with SIM7080G is designed for communication in the NB-IoT and Cat-M standard. It also enables the use of GNSS systems for positioning. Waveshare Pico-SIM7080G-Cat-M/NB-IoT (EN)

WiFi module with ESP8266 designed to work with the Raspberry Pi Pico. It communicates via the UART interface using AT commands. Waveshare Pico-ESP8266

An expansion board designed for the Raspberry Pi Pico. The board has 13 GPIO pins, 3 ADCs, UART, I2C and SPI interfaces. The pins are color coded according to the Gravity standard. DFRobot DFR0848

The expansion board with the LoRa SX1262 module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. Waveshare Pico-LoRa-SX1262-868M

A pin expander for Raspberry Pi Pico boards. It is equipped with a standard female connector and four sets of male strips 2x20 pins. Waveshare Pico-Quad-Expander

Module with LCD IPS display, 1.14" diagonal and 240x135 px resolution. Communication via SPI interface. Waveshare Pico-LCD-1.14

Module with environmental sensors designed for Raspberry Pi Pico. It allows you to measure temperature, humidity, pressure, illuminance, detection of VOC, IR and UV radiation and orientation. Waveshare Pico-Environment-Sensor

Module with 4-digit 8-segment LED display. Communication via the SPI interface. Waveshare Pico-8SEG-LED

Module with 3-color e-Paper display with a diagonal of 2.9" and a resolution of 296x128 px. Communication via the SPI interface. Waveshare Pico-ePaper-2.9-B

Expansion module with audio and video outputs dedicated to Raspberry Pi Pico boards. It has a VGA output, SD card slot, audio outputs and control buttons. Pimoroni PIM553

Pin expander for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets of 2x20 pin male strips. SB Components 20836

Module with IPS LCD display with a diagonal of 2" and a resolution of 320x240 px. Communication via the SPI interface. Waveshare Pico-LCD-2

Module with IPS LCD touch screen with a diagonal of 3.5" and a resolution of 480x320 px. Communication via the SPI interface. Waveshare Pico-ResTouch-LCD-3.5

Module with 10 DoF IMU ICM20948 sensor (accelerometer, gyroscope and magnetometer) and LPS22HB (barometer). Communication via the I2C interface. Waveshare Pico-10DOF-IMU

Prototyping kit dedicated to Raspberry Pi Pico. It offers the pins of all RPi Pico pins, a contact plate, buttons, LEDs and a buzzer. SB Components 20843

Universal module dedicated to e-Paper displays. It is equipped with connectors compatible with the Raspberry Pi Pico. It allows you to connect a display through one of the two FPC sockets. SB Components 26241

The servo control module is designed for the Raspberry Pi Pico. It uses the PWM pins of the microcontroller and has 16 3-pin connectors compatible with the interface used in the servos. Waveshare Pico-Servo-Driver

Module with the driver of motors TB6612FNG and driver PWM PCA9685 for Raspberry Pi Pico. It allows you to control the movement of 4 DC motors. Waveshare Pico-Motor-Driver

Module with 16x10 RGB LED matrix display (160 diodes) designed to work with the Raspberry Pi Pico. Communicates via a digital interface. Waveshare Pico-RGB-LED

Keyboard module designed for Raspberry Pi Pico. It is equipped with 16 buttons with RGB backlight. Pimoroni PIM551