Category: Main categories

Module with SoC system containing eight 64-bit ARM v8.2 cores and Volta graphic system consisting of 384 cores supporting CUDA, cuDNN and TensorRT technology. The system is supported by DDR4 RAM with a capacity of 8 GB, eMMC memory with a capacity of 32 GB. NVIDIA Jetson AGX Xavier 8GB 900-82888-0060-000.

A set of 100 M3 screws with a length of 16 mm with a Philips head

Heatsink set with fan for Raspberry Pi 4 minicomputer.

A set of 100 pieces of various colored heat-shrinkable tubing for wire insulation, 10 cm long. NAR0832

Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 4GB or NVIDIA Jetson TX2i modules. It is equipped with an Ethernet connector, microSD, UART, I2C and GPIO interfaces, USB 2.0 OTG, USB 3.0 ports, 4-line MIPI (I-PEX), CAN, HDMI 2.0 connector and a 7-pin SATA connector. Connect Tech ASG016

Camera module with Sony IMX291 image sensor with 2 MP resolution. Compatible with Raspberry Pi. Supports H.264, MJPG and YUY2 data format. Has a built-in IR filter. ArduCam B0200

Wireless keyboard dedicated to 7-inch tablets. It guarantees a fast and stable connection with compatible devices up to 10 meters. Charging takes place via the USB port, and the 160 mA battery provides up to 55 hours of uninterrupted operation

Motor with 25 mm diameter and 65 mm length, 20,4:1 metal gear, 12 V operating voltage, 0,3 A to 5,6 A power consumption, 500 RPM speed, 6 maximum torque and 48 CPR encoder. Pololu 4843

Astro Carrier base plate attachment designed to work with the NVIDIA Jetson TX2i module. It has HDMI, USB 3.0 and USB 2.0, Ethernet as well as Mini PCIe and mSATA connectors. The overlay is plugged into the plate-to-board connector available on the Astro base plate. Connect Tech XBG206

LPCXpresso55S69 evaluation kit with LPC55S69 microcontroller with ARM Cortex-M33 core. The board contains a built-in debugging probe, audio subsystem and accelerometer, with the possibility of adding ready-made additional boards for connecting to the network, sensors, displays and other interfaces. NXP LPC55S69-EVK

The Coral System-on-Module (SoM) is a fully-integrated system that helps you build embedded systems that demand fast machine learning (ML) inferencing. It contains NXP\'s iMX8M system-on-chip (SoC), eMMC memory, LPDDR4 RAM, Wi-Fi, and Bluetooth, but its unique power comes from Google\'s Edge TPU coprocessor. Coral G650-04474-01

Digital input module designed for use with the S7-1200 PLC controller. Has 8 digital inputs. Siemens 6ES7221-1BF32-0XB0

Camera module with Sony IMX219 image sensor with 8 MP resolution. It is compatible with Raspberry Pi. It supports MJPG and YUY2 data format. ArduCam B0196

BGA balls with a diameter of 0.35mm and composition Sn63/Pb37. The container has 25 000 pieces.

A set of LIDAR laser scanner and data processing unit. It allows you to create maps of areas up to 100 000 m². Range up to 20 m and resolution up to 5 cm. It has a built-in inertial 9-DOF navigation system. Seeed Studio 114991984

BGA balls with a diameter of 0.55mm and composition Sn63/Pb37. The container has 25 000 pieces. 

BGA balls with a diameter of 0.65mm and composition Sn63/Pb37. The container contains 25 000 pieces.

Adafruit 2315

Tape, in the form of a braid, for removing excess molten solder binder when soldering and desoldering electronic components, 3mm wide and 1.5m long.

A set containing cleaning brushes, various scrapers and blades useful in PCB service. ZD-151