Category: Main categories

Dispensing needle for precise application of glue, flux with an internal diameter of 0.51mm and an external diameter of 0.8mm. Set of 5 pcs

Dispensing needle for precise application of glue, flux with an internal diameter of 0.3mm and an external diameter of 0.55mm. Set of 5 pcs

Gigabit Ethernet transceiver with an FMC interface. Up to 1 Gbps network transfers with the host board using an FMC connector. NET-FMC can be connected any FMC(HPC) interfaces. Terasic P0481

The module is equipped with four 10A / 250VAC relays controlled independently via a serial bus (UART) or from a PC (through a microUSB connector). The NO / NC contacts of the relays have been led to the ARK screw terminals. ICSTATION ICSE012A

Module with a dust sensor PPD42NS. The board is equipped with a Grove cable and communicates via the PWM interface. Seeed Studio 101020012

Needle bending needle, for precise glue application, Flux 1,194mm internal diameter and 1,651mm outside diameter. Set of 5 pcs

Needle bending needle, for precise glue application, Flux 0.84mm internal diameter and 1,26mm outside diameter. Set of 5 pcs

Needle bending needle, for precise glue application, Flux 0.686mm internal diameter and 1,067mm outside diameter. Set of 5 pcs

Needle bending needle, for precise glue application, Flux 0.603mm internal diameter and 0,9081mm outside diameter. Set of 5 pcs

Add 4.3” TFT LCD Display features a vivid 4.3" LED backlit 480 x 272 TFT LCD with capacitive overlay for smartphone-like input. BB-CAPE-DISP-CT43

Artix-7 FPGA, 33280 Logic Cells, 5200 Slices, 90 DSP Slices, CSPBGA325, Xilinx

Zynq-7000 All Programmable SoC, Dual ARM Cortex-A9 MPCore, Artix-7 FPGA, 28K Logic Cells, 667MHz CSPBGA400, Xilinx

The Segger J-Link Mictor 38 Adapter allows connection to a 38-pin Mictor connector in accordance with the ARM "ETM" specification. The adapter connects the GND and JTAG pins to the 20-pin J-Link, and the trace pins on the Mictor connector are not used.

7" IPS LCD display with a touch panel. Equipped with a DSI interface for displaying the image and I2C for operating the touch panel. It has a resolution of 800x480 px. Waveshare 7inch DSI LCD (B)

WAVE ROVER Flexible And Expandable 4WD Mobile Robot Chassis, Full Metal Body, Multiple Hosts Support, With Onboard ESP32 Module. WAVE ROVER (EU)

Lead-free Sn99.3Cu0.7 1.1.3 solder wire, manufactured in accordance with the EN ISO 9453:2014 standard, combines rosin, halide-free 1.1.3 flux with high-quality binder, meeting the requirements of the RoHS2 directive and guaranteeing performance in electronics and electrical engineering

Module with Xilinx Artix-7 100T system, FLASH memory with 32 MB capacity, 1 GB RAM memory and 10/100 Mbit Ethernet controller. Everything fits on a small 4 x 5 cm tile. TE0712-02-100-2C3

Module with Xilinx Artix-7 100T system and 32MB FLASH memory. TE0725LP-01-100-2L

Module with Xilinx Artix-7 100T system and 32MB FLASH memory. TE0725LP-01-100-2D

Module with Xilinx Artix-7 100T system and 32MB FLASH memory. TE0725LP-01-100-2C