Category: Main categories

Tip GD-1 No. 055 mounted on the heater. Suitable for all types of Elwik soldering irons.

Tip GD-3 No. 053 mounted on the heater. Suitable for all types of Elwik soldering irons.

Tip GD-1 No. 048 mounted on the heater. Suitable for all types of Elwik soldering irons.

The Step-Down Converter Module converts 4-40V to a regulated output voltage of 1.25-36V, supporting a maximum of 8A and 200W, with a conversion efficiency of 94%. It is a compact device (61 x 41 x 27 mm) using PWM modulation, ideal for industrial applications requiring a stable output voltage.

Professional, aqueous, non-flammable liquid for handling printed circuit boards in ultrasonic cleaners. Removes suitable applications after soldering. Perfect for flooding not only with diluted liquids. MICRO CHIP ELEKTRONIC ART.237

The RS485 module with 8 channels allows simultaneous connection of up to 8 DS18B20 temperature sensors, operating in the voltage range of 6-24V and current of 8-13mA. The temperature measurement range is -55 to 125°C, with an accuracy of ±0.5°C in the -10 to 85°C range, making it ideal for temperature monitoring at various locations in domestic and industrial projects.

Tip GD-1 No. 045 mounted on the heater. Suitable for all types of Elwik soldering irons.

The Step-Up Converter Module converts input voltage (8.5-50V) and input current (up to 15A) to output voltage (10-60V) and output current (up to 12A) with high conversion efficiency (96%) and overvoltage protection high intensity. The module can operate in a wide temperature range (-40 - 85°C) and frequency (150kHz), allowing constant current adjustment from 0.2 to 12A.

Tip GD-1 No. 044 mounted on the heater. Suitable for all types of Elwik soldering irons.

Dual-channel DAC converter compatible with the SYZYGY standard. The module can simultaneously generate two 5V signals with 14-bit resolution and sampling frequency up to 100MS/s. The module is compatible with Eclypse Z7 and Genesys ZU evaluation kits. Digilent Zmod AWG 1411 410-397

Dual-channel ADC converter compatible with the SYZYGY standard. The module can simultaneously obtain two 25V signals with 14-bit resolution and sampling frequency up to 100MS/s. The module is compatible with Eclypse Z7 and Genesys ZU evaluation kits. Digilent Zmod Scope 1410-105 (410-396)

Evaluation kit with the Zynq-7000 APSoC chip integrating the ARM Cortex-A9 based processor with the Artix-7 FPGA chip. Provides two SYZYGY interface connectors enabling cooperation with fast modular systems. The set works under the control of Linux. Digilent Eclypse Z7 (410-393)

The USB Step-Up converter module converts the voltage in the range of 4-13V for pads and 5V for USB to 0.5-30V, supporting current up to 2A and power up to 15W. It is characterized by high measurement accuracy, advanced protective functions and compact dimensions of 84 x 35 x 14mm.

The A2212 2-4S 1800KV BLDC brushless motor is a compact and lightweight electric motor, designed for model making, especially in drones, airplanes, helicopters and other remotely controlled vehicles, offering high efficiency, long life and low energy consumption, while being compatible with LiPo batteries from 2S to 4S

The A2212 2-4S 1400KV BLDC brushless motor is a compact and lightweight electric motor, designed for model making, especially in drones, airplanes, helicopters and other remotely controlled vehicles, offering high efficiency, long life and low energy consumption, while being compatible with LiPo batteries from 2S to 4S

The A2212 2-4S 1200KV BLDC brushless motor is a compact and lightweight electric motor, designed for model making, especially in drones, airplanes, helicopters and other remotely controlled vehicles, offering high efficiency, long life and low energy consumption, while being compatible with LiPo batteries from 2S to 4S

A controller designed for the Pololu 3pi+ 2040 robot, it is based on the Raspberry Pi RP2040 microcontroller and a set of sensors. A version for use with an OLED display. Pololu 5006

The WEP 852D + SE soldering station is a hot air station for soldering of electronic systems, e.g. BGA, SMD, etc., and a 75W tip soldering station. Both station modules can work independently of each other. The wide application and minimal failure rate of the device gives it a leading position on the market of soldering stations. WEP 852D+SE

The WEP 968DA + soldering station is a hot air station and a soldering iron with LED display. It is equipped with a SAMSUNG microprocessor that checks the station\'s operating parameters and corrects them to the set values. The station is suitable for soldering and desoldering electronic components such as SOIC, CHIP, QFP, PLCC, BGA, SMD. WEP 968DA+

The WEP 995D soldering station is a station consisting of a hot air soldering iron and a tip soldering iron (75 W). It has a PID controller, LCD display, adjustable temperature and air blow out provided by the fan located in the flask. It is used for soldering and desoldering electronic components such as: SOIC, CHIP, QFP, PLCC, BGA, SMD. WEP 995D