New products
New products
Available
Available
Available
Available
Available
Available
SparkFun RedBoard Artemis Nano - evaluation kit with the Artemis module
ID: 578342
5906623420216
zł102.51
Tax included
zł83.34 tax excl.
Evaluation kit with Sparkfun Artemis Bluetooth 5.0 module designed on the basis of the Arduino Nano kit. It has a USB C. The board also has a USB-UART converter, a microphone, Lipo battery charging and a JTAG debugging connector. Artemis has support in the Arduino IDE. SparkFun DEV-15443
Description
Evaluation kit with Sparkfun Artemis Bluetooth 5.0 module designed on the basis of the Arduino Nano kit. It has a USB C connector for powering and programming the set. The board also has a USB-UART converter, a microphone connected to the PDM interface of the microcontroller, Lipo battery connector and charging and a JTAG debugging connector.
Artemis has support in the Arduino IDE, which greatly facilitates the start of work with the module. The module's instruction manual and documentation are available on the manufacturer's website.
Features
- Arduino Nano Footprint
- Lipo battery charging
- 1M Flash / 384k RAM
- 48MHz / 96MHz turbo available
- 6uA/MHz (operates less than 5mW at full operation)
- 17 GPIO - all interrupt capable
- 17 PWM channels
- Built in BLE radio
- USB-UART CH340C converter
- USB Type C connector
- JTAG debug connector
- Built-in microphone
- 8 ADC channels with 14-bit precision with up to 2.67 million samples per second effective continuous, multi-slot sampling rate
- 2 UARTs
- 4 I2C buses
- 2 SPI buses
- PDM interface
- Qwiic Connector
578342
Data sheet
- Microcontroller
- Artemis
- Core
- Cortex-M4
- Frequency
- 48MHz
- Flash memory
- 1024kB
- RAM
- 384 kB
- EEPROM memory
- none
- Number of digital pins
- 17
- Number of PWM channels
- 17
- Ilość wejść analogowych
- 10
- ADC
- 1x 14-bit
- DAC
- none
- CAN
- none
- USB
- 1
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- Yes
- GSM/GPRS module
- No
- Logic voltage
- 3,3 V
- MicroSD slot
- No
- Supply voltage min
- 5 V
- Supply voltages max
- 5 V
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
USB A 2.0 / USB C cable silicone, 1 m, white
Delivery date unknown No product available!
- Available
- Available
- Available
USB / USB type C cable with a long 0.8m long connector. Kruger & Matz KM0363
zł28.54 24hAvailable quantity: 1 AvailableEvaluation kit with Sparkfun Artemis Bluetooth 5.0 module designed on the basis of the Arduino UNO kit. It has a USB C. The board also has a USB-UART converter, a microphone and a JTAG debugging connector. Artemis has support in the Arduino IDE. SparkFun DEV-15444
zł146.44 24hAvailable quantity: 2 AvailableEvaluation kit with Sparkfun Artemis Bluetooth 5.0 module designed on the basis of the Arduino Mega kit. It has a USB C. The board also has a USB-UART converter, a microphone and a JTAG debugging connector. Artemis has support in the Arduino IDE. SparkFun DEV-15442
zł154.99 24hAvailable quantity: 1 AvailableBLE module based on Cortex-M4F core with integrated 2.4GHz antenna. It has been equipped with numerous peripheral systems, including UART, I2C, SPI, I2S interfaces and ADC inputs. Has support in the Arduino IDE. SparkFun WRL-15484
zł62.12 24hAvailable quantity: 2 Available
Other products in the same category (16)
Evaluation kit with Bluetooth 5.0 Sparkfun Artemis module. Equipped with a microphone, kmaers and accelerometer. Himax HM01B0 camera included. SparkFun KIT-17071
zł281.13 24hAvailable quantity: 1 AvailableEvaluation kit with Sparkfun Artemis Bluetooth 5.0 module designed on the basis of the Feather kit. It has a USB C. The board also has a USB-UART converter, a microphone and a JTAG debugging connector. Artemis has support in the Arduino IDE. SparkFun WRL-15574
zł123.89 24hAvailable quantity: 1 Available- Available
Development board with NXP iMXRT1062 ARM Cortex-M7 microcontroller. Equipped with a microSD slot. Version without Ethernet communication. PJRC TEENSY41-NE
zł191.67 4 weeks No product available!
Development kit with ATSAMD51J20 microcontroller with ARM Cortex M4F core. It is clocked at 120 MHz, has 1 MB of Flash and 256 KB of SRAM. There are 6 SERCOM interfaces on the board. SparkFun DEV-14713
zł149.05 24hAvailable quantity: 1 AvailableDevelopment kit with ATSAMD21E microcontroller with ARM Cortex M0+ core. The chip can be clocked at 48 MHz, has a built-in 256 KB of Flash memory and 32 KB of SRAM. The module has a Qwiic connector. SparkFun DEV-15423
zł110.56 24hAvailable quantity: 1 AvailableThis board combines the simplicity of the UNO’s Optiboot bootloader (which is used in the Pro series), the stability of the FTDI (which we all missed after the Duemilanove was discontinued) and the R3 shield compatibility of the latest Arduino UNO R3. SparkFun DEV-13975
zł95.23 24hAvailable quantity: 1 AvailableA small module matching the contact plate based on a 32-bit microcontroller with ARM Cortex M7 core. Has a microSD slot. PJRC TEENSY41
Regular pricezł203.48zł199.00 24hAvailable quantity: 10 AvailableA development board compatible with the Arduino Pro Mini. It is equipped with an ATSAMD21G18 microcontroller. It has 22 I/O lines and 14 analogue inputs. SparkFun DEV-13664
zł119.00 3 weeks No product available!
IoT development board the size of Arduino, equipped with an ARM Cortex-M3 processor (STM32F205) and a Wi-Fi communication module (with an integrated antenna and uFL connector). SparkFun DEV-13321
zł204.39 24hAvailable quantity: 1 AvailableDevelopment board with NXP iMXRT1062 ARM Cortex-M7 microcontroller. Equipped with a microSD slot. Version without Ethernet communication. PJRC TEENSY41-NE-PINS
zł195.93 4 weeks No product available!
Evaluation kit with Bluetooth 5.0 Sparkfun Artemis module. Equipped with a microphone, kmaers and accelerometer. SparkFun DEV-16828
zł153.80 24hAvailable quantity: 1 Available No product available!
Base board compatible with Arduino. It was equipped with the ATSAMD21G18 microcontroller. It has 26 I/O lines and 14 analog inputs. SparkFun DEV-14812
zł171.87 3 weeks No product available!
The SparkFun AST-CAN485 board is a miniature Arduino in a compact Pro Mini housing with a built-in CAN (Control Area Network) and RS485 ports. Sparkfun DEV-14483
zł315.22 24hAvailable quantity: 1 AvailableEvaluation kit with Sparkfun Artemis Bluetooth 5.0 module designed on the basis of the Arduino Mega kit. It has a USB C. The board also has a USB-UART converter, a microphone and a JTAG debugging connector. Artemis has support in the Arduino IDE. SparkFun DEV-15442
zł154.99 24hAvailable quantity: 1 Available
Evaluation kit with Sparkfun Artemis Bluetooth 5.0 module designed on the basis of the Arduino Nano kit. It has a USB C. The board also has a USB-UART converter, a microphone, Lipo battery charging and a JTAG debugging connector. Artemis has support in the Arduino IDE. SparkFun DEV-15443