- New
Kitronik Compact Motor Driver - motor driver for BBC micro:bit
ID: 1198628
zł61.30
Tax included
zł49.84 tax excl.
This board allows for simultaneous control of two motors with full direction and stopping control, ideal for robotic buggies and educational vehicles. It features built-in short circuit, overload, and overheat protection, as well as a stabilized 3V output to power the micro:bit. The Edge Connector and additional pins allow for easy connection of sensors, switches, and accessories, expanding the project's functionality. Programming is supported by dedicated MakeCode blocks and support for the Kitronik 5698 Python.
Description
Kitronik Compact Motor Driver is a versatile board that adds motor control capabilities to projects based on the BBC micro:bit. It allows simultaneous control of two motors with full directional control (forward, reverse) and stop, making it an ideal choice for projects such as robotic buggies or other vehicles. The board includes built-in protection against short-circuits, overload, and overheating, ensuring stable and safe operation. When used with stepper motors, half-step mode is supported (micro-stepping is not).
The integrated Edge Connector enables quick and direct connection to the micro:bit, while additional breakout pins provide access to buttons A and B and other pins. This allows extra switches, sensors, or other accessories to be connected, expanding the system’s functionality. The board also provides two additional input/output pins, which can operate in both digital and analog modes. Power is supplied via the screw terminal block or servo connector, while the built-in on/off switch and status LED simplify operation. Importantly, the board generates a regulated 3V output to power the micro:bit directly, removing the need for a separate power supply.
The manufacturer has also provided dedicated MakeCode blocks, making programming quick and intuitive. Advanced users can also take advantage of Python support. Thanks to its compact size, ease of use, and rich functionality, this board is suitable for many educational and hobby projects, giving full control over drive systems in robotics.
Features
- Simultaneous control of two DC motors
- Supports stepper motors in half-step mode
- Built-in protection: short-circuit, overcurrent, and thermal
- Control options: forward, reverse, stop
- Voltage: 3V to 10.8V
- Maximum current per motor: 1.5A
- Integrated Edge Connector for micro:bit
- Regulated 3V output for powering micro:bit
- Two additional digital/analog input/output pins
- Support for connecting extra switches and sensors
- Power via screw terminal block or servo connector
- Built-in on/off switch and status LED
- Programmable in MakeCode (dedicated Kitronik blocks) or Python
- Compact dimensions: 68 x 46.5 x 10.6 mm
1198628
Data sheet
- Output current
- 1,5 A
- Number of channels
- 2
- Supply voltage min
- 3 V
- Supply voltages max
- 10,8 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Educational micro:bit module with 32-bit ARM Cortex-M4 microcontroller. Manufactured to interest the youngest in computer engineering. SparkFun DEV-17287
zł72.90
24h
Available quantity: 77
Available
Starter kit with micro:bit v2. In addition to the micro:bit v2 board, the set includes a microUSB-USB cable, a battery basket and two AAA batteries. SparkFun DEV-17288
zł94.89
24h
Available quantity: 19
Available
Starter kit with micro:bit v2. The set includes the most necessary elements needed to implement micro:bit projects: LEDs, buttons, potentiometer, servo, prototype board and a set of cables. SparkFun KIT-17362
zł321.01
Delivery date unknown
No product available!
Other products in the same category (16)
Module with DC motor driver DRV8256E. It can work with motors supplied with the voltage from 4.5 to 48 V and the current consumption up to 1.9 A. Pololu 4038
zł72.59
24h
Available quantity: 2
Available
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with connectors for self-assembly. Pololu 5043
zł601.58
4 weeks
No product available!
The expansion module is designed to work with micro:bit. It allows you to control 4 DC motors or two stepper motors and 8 servos. It communicates via the I2C interface. DFRobot DFR0548
zł84.92
24h
Available quantity: 3
Available
Pololu TReX Dual Motor Controller DMC01
zł1,054.63
24h
Available quantity: 1
Available
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with connectors for assembly. Pololu 5052
zł332.37
4 weeks
No product available!
Pololu Simple High-Power Motor Controller 18v25
zł827.97
4 weeks
No product available!
Shield with dual-channel DC motor driver for Arduino. It has an operating voltage from 7 to 30 V and a continuous current of up to 1.2 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron SHIELD-3AMOTOR
zł111.29
24h
Available quantity: 2
Available
Pololu G2 24v12 High Power is a miniature DC motor controller. Driver\'s power supply: 6.5 ... 30V. Current capacity of the module: 12A. The module has protection against back voltage and overvoltage. Pololu 1365
zł559.49
4 weeks
No product available!
The expansion module is designed to work with the micro:bit educational board. It can control 3 servos and 2 DC motors. Waveshare Motor Driver for micro:bit
zł43.63
24h
Available quantity: 1
Available
Single-channel DC motor controller that allows the motor to be controlled with a voltage range of 6-30V and a current of up to 13A. Allows engine speed control using PWM signals. Cytron MD13S
zł63.63
24h
Available quantity: 177
Available
Pololu Simple Motor Controller 18v7 (Fully Assembled)
zł783.23
24h
Available quantity: 1
Available
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with soldered connectors. Pololu 5040
zł327.65
4 weeks
No product available!
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3×0.8″ board supports a wide 6.5V to 40V voltage range and is efficient enough to deliver a continuous 13A without a heat sink. Driver includes reverse-voltage protection along with basic current sensing and current limiting functionality. Pololu 2992
zł181.07
4 weeks
No product available!
Pololu Dual G2 High-Power Motor Driver 18v22 is an extension that allows you to control two DC motors designed for Raspberry Pi. The motors can be powered with 6.5-30V and draw up a maximum current of 22A. Pololu 3754
zł605.05
4 weeks
No product available!
Pololu Dual G2 High-Power Motor Driver 24v18 is an extension that allows you to control two DC motors designed for Raspberry Pi. The motors can be supplied with 6.5-36V voltage and can draw a maximum current of 18A. Pololu 3756
zł423.01
4 weeks
No product available!
Dual DC motor controller designed for Raspberry Pi, which enables the engine to be supplied with voltage in the 4.5-28V range and power consumption in continuous operation of 2.6A (5A in peak) of two DC motors. Pololu 2762
zł155.91
24h
Available quantity: 1
Available
This board allows for simultaneous control of two motors with full direction and stopping control, ideal for robotic buggies and educational vehicles. It features built-in short circuit, overload, and overheat protection, as well as a stabilized 3V output to power the micro:bit. The Edge Connector and additional pins allow for easy connection of sensors, switches, and accessories, expanding the project's functionality. Programming is supported by dedicated MakeCode blocks and support for the Kitronik 5698 Python.