OpenLog Artemis - data logger for Qwiic modules
ID: 581167
5906623420322
zł218.40
Tax included
zł177.56 tax excl.
Data logger pre-programmed to automatically record data from IMU, GPS and Qwiic series sensors. SparkFun DEV-16832
Description
Data logger that is pre-programmed to automatically record data from IMU, GPS, serial data and various pressure, humidity and distance sensors. OpenLog Artemis automatically detects, configures and registers Qwiic sensors. After the module is turned on, all incoming serial data is automatically saved in the file with the baud rate up to 921600bps. OpenLog Artemis also allows analog data logging via four ADC inputs. Voltages up to 2 V can be recorded with 14-bit precision, up to 1900 Hz for one channel and 1000 Hz for all four channels. Additionally, thanks to the built-in clock, all data can be marked with the login time.
The OpenLog Artemis module is based on the Apollo3 microcontroller from Cortex-M4F. The board also has a 9-axis IMU ICM-20948. The data is logged on a microSD card inserted directly into the slot located on the board. The module is also equipped with a socket and a LiPo battery charger. The recorder software is being modified and improved. Updating the system software is easy via the dedicated GUI Artemis Firmware Upload application.
The list of supported modules can be found on the product's website.
Features
- Artemis Module (Cortex-M4F based Apollo3 microcontroller)
- Configurable via CH340E and Artemis Firmware Upload GUI
- Operating voltage range
- 3.3V to 6.5V (via VIN with optional external power switch)
- 5V with USB (via 5V or USB type C)
- 3.6V to 4.2V with LiPo battery (via VBATT or 2-pin JST-PH)
- Built-in MCP73831 single cell LiPo charger
- Minimum 450mA charge rate
- 3.3V (via 3V3)
- 3.3V to 6.5V (via VIN with optional external power switch)
- Current consumption
- ~20mA (Run)
- ~80µA (Sleep)
- ~18µA (Deep Sleep - regulator shut down)
- Ports
- 1x USB type C
- 1x LiPo battery enabled
- 1x Qwiic enabled I2C with power control
- 1x SWD 2x5 header
- 4x Analog-to-digital
- 14-bit, up to 1900Hz, 2V max (3.3V compatible)
- Serial
- Logging speeds up to 500000bps
- 1x microSD socket
- Support for FAT32 and older FAT16 formats up to 32GB with power control
- RTC with 1mAhr battery backup
- 9-axis IMU logging up to 250Hz
- ICM-20948 via SPI interface
- LEDs
- Power
- LiPo charge indicator
- Serial Tx and Rx
- Status
581167
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
No product available!
No product available!
Available
Flexible 4-core cable, 100 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17259
zł10.81
Delivery date unknown
No product available!
Flexible 4-core cable, 200 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17258
zł12.93
Delivery date unknown
No product available!
Other products in the same category (16)
Data logger with USB protocol support. Data received through the UART interface and saved on the microSD card. Supports cards with a capacity of up to 32 GB. DFRobot TEL0148
zł26.56
24h
Available quantity: 8
Available
Data logger dedicated to micro:bit. It connects to the module via the UART interface and allows you to save data on a microSD card. SparkFun DEV-15270
zł73.80
24h
Available quantity: 1
Available
Data logger with USB type C connector. Data is received via the UART interface and saved on the built-in Flash memory with a capacity of 128 MB. DFRobot TEL0147
zł54.61
4 weeks
No product available!
Data logger programmed to automatically record data from GPS and Qwiic series sensors. SparkFun DEV-19426
zł171.09
24h
Available quantity: 2
Available
Wireless data logger with LoRaWAN network communication. Dedicated to industrial long-distance data acquisition from sensors with RS485 interface, GPIO or analog output. Seeed Studio 114992872
zł444.62
24h
Available quantity: 1
Available
Data logger with LPC2148 chip and microSD card support. The module is equipped with a microUSB connector, Li-Pol battery charger and a microSD card slot. SparkFun WIG-12772
zł373.32
24h
Available quantity: 1
Available
Data logger programmed to automatically record data from GPS and Qwiic series sensors. It has a built-in ESP32-WROOM-32E module and IMU sensors ISM330DHCX (accelerometer and gyroscope) and MMC5983MA (magnetometer). SparkFun DEV-20594
zł413.86
24h
Available quantity: 2
Available
Data logger dedicated to monitoring and analysing electrical signals. Enables easy and precise data collection from a variety of sources, including power systems, industrial automation and other applications. Hantek 365A
zł329.00
4 weeks
No product available!
Compact expansion with advanced data monitoring features, equipped with temperature, humidity, light sensors and RTC clock. With low power consumption, battery monitoring function and I2C protocol support, it is ideal for long-term battery-powered projects, offering precise measurements and efficient power management. Seeed Studio 114993446
zł46.70
24h
Available quantity: 5
Available
Data logger dedicated to monitoring and analysing electrical signals. It enables easy and precise data collection from various sources, including power systems, industrial automation and other applications. It is powered by a rechargeable battery and uses Bluetooth communication. It has iPad support. Hantek 365F
zł579.00
4 weeks
No product available!
A universal set of tools for conducting scientific experiments. It consists of the Gravity module: Science Data Acquisition (SCI DAQ) and sensors: soil moisture, VEML7700 light, SHT31-F temperature and humidity, and ENS160 air quality. DFRobot EDU0170
zł459.00
24h
Available quantity: 2
Available
Data logger dedicated to Feather plates. Equipped with RTC clock, battery slot and micro SD card slot. Adafruit 2922
zł47.17
24h
Available quantity: 1
Available
Data logger dedicated to monitoring and analysing electrical signals. It enables easy and precise data collection from a variety of sources, including power systems, industrial automation and other applications. It is powered by a rechargeable battery and has built-in Bluetooth communication. Hantek 365C
zł469.00
24h
Available quantity: 3
Available
IEPE sensor data logger with a built-in web server, four analog inputs, and 24-bit resolution. Digilent 6069-410-006-1
zł7,630.55
3 weeks
No product available!
Data logger pre-programmed to automatically log data from Qwiic sensors. It is designed for users who need to collect a lot of data into a CSV or JSON file. Data can be saved to a microSD card or sent wirelessly to an Internet of Things (IoT) service. SparkFun DEV-22462
zł306.29
3 weeks
No product available!
Data logger based on the ATmega328 microcontroller. Data received via the I2C interface are saved on the microSD card. The module supports cards with a capacity of up to 32 GB. SparkFun DEV-15164
zł102.25
3 weeks
No product available!
Data logger pre-programmed to automatically record data from IMU, GPS and Qwiic series sensors. SparkFun DEV-16832