

zł577.31 tax excl.
Set with OpenLog Artemis data logger. The set includes an I2C expander, a strain gauge module, a USB type C cable, a 1250 mAh LiPo battery, a 1 GB microSD card and all the necessary Qwiic cables. SparkFun KIT-18295
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Set with OpenLog Artemis data logger. The set includes a USB type C cable, a LiPo 1250 mAh battery, a 1 GB microSD card and all the necessary Qwiic cables to connect the attached boards. The kit also includes an I2C Qwiic Mux Breakout expander and a Qwiic Scale strain gauge module to enable access to data from any Qwiic series sensors.
OpenLog Artemis is a data logger that comes pre-programmed to automatically record data from IMU, GPS, serial communication modules, and various pressure, humidity and distance sensors. OpenLog Artemis automatically detects, configures and logs Qwiic sensor data. After enabling the module, all incoming data is automatically saved in a file with a baud rate of up to 921600bps. OpenLog Artemis also allows analog data logging via four ADC inputs. Voltages up to 2 V can be recorded with 14-bit precision, up to 1900 Hz for one channel and 1000 Hz for all four channels. Additionally, thanks to the built-in clock, all data can be marked with the login time.
Qwiic Mux Breakout is a module of an 8-channel I2C expander based on the TCA9548A chip. The module has Qwiic connectors and enables communication with multiple I2C devices that have the same address.
Qwiic Scale is a module with a NAU7802 24-bit ADC converter. It enables reading data from strain gauges and scales. The NAU7802 amplifies the read resistance of the strain gauge and converts it into a digital signal.
OpenLog Artemis
Qwiic Mux Breakout
Qwiic Scale
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Aluminum extensometer beam, allowing measurement of weight up to 1 kilogram. It has four wires. It is used in kitchen scales and portable scales.
Aluminum tensometer beam, allowing weight measurement up to 2 kilograms. It has four wires. It is used in kitchen scales and portable scales.
No product available!
Aluminum extensometer beam, allowing weight measurement up to 3 kilograms. It has four wires. It is used in kitchen scales and portable scales.
No product available!
This disc load cell (sometimes called a strain gauge) can translate up to a whopping 200kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the disc. SEN-13332
8-channel I2C expander module based on the TCA9548A system. The module has Qwiic connectors and allows communication with many I2C devices that have the same address. Sparkfun BOB-16784
Data logger pre-programmed to automatically record data from IMU, GPS and Qwiic series sensors. SparkFun DEV-16832
Module with 24-bit ADC NAU7802 converter. It enables reading data from strain gauges and scales. I2C interface. SparkFun SEN-15242
Data logger dedicated to monitoring and analysing electrical signals. It enables easy and precise data collection from various sources, including power systems, industrial automation and other applications. It is powered by a rechargeable battery and uses Bluetooth communication. It has iPad support. Hantek 365E
Data logger with USB type C connector. Data is received via the UART interface and saved on the built-in Flash memory with a capacity of 128 MB. DFRobot TEL0147
An integrated data acquisition module that includes functions such as data display, automatic sensor recognition and calibration, data storage, RTC clock and data conversion to make data acquisition more convenient and efficient. DFRobot DFR0999
Wireless data logger with LoRaWAN network communication. Dedicated to industrial long-distance data acquisition from sensors with RS485 interface, GPIO or analog output. Seeed Studio 114992872
Data logger programmed to automatically record data from GPS and Qwiic series sensors. SparkFun DEV-19426
A universal set of tools for conducting scientific experiments. It consists of the Gravity module: Science Data Acquisition (SCI DAQ) and sensors: soil moisture, VEML7700 light, SHT31-F temperature and humidity, and ENS160 air quality. DFRobot EDU0170
Data logger programmed to automatically record data from GPS and Qwiic series sensors. It has a built-in ESP32-WROOM-32E module and IMU sensors ISM330DHCX (accelerometer and gyroscope) and MMC5983MA (magnetometer). SparkFun DEV-20594
Data logger based on the ATmega328 microcontroller. Data received via the I2C interface are saved on the microSD card. The module supports cards with a capacity of up to 32 GB. SparkFun DEV-15164
No product available!
Data logger dedicated to monitoring and analysing electrical signals. It enables easy and precise data collection from various sources, including power systems, industrial automation and other applications. It is powered by a rechargeable battery and uses Bluetooth communication. It has iPad support. Hantek 365F
No product available!
Data logger pre-programmed to automatically record data from IMU, GPS and Qwiic series sensors. SparkFun DEV-16832
Data logger with LPC2148 chip and microSD card support. The module is equipped with a microUSB connector, Li-Pol battery charger and a microSD card slot. SparkFun WIG-12772
Data logger dedicated to Feather plates. Equipped with RTC clock, battery slot and micro SD card slot. Adafruit 2922
No product available!
Data logger pre-programmed to automatically log data from Qwiic sensors. It is designed for users who need to collect a lot of data into a CSV or JSON file. Data can be saved to a microSD card or sent wirelessly to an Internet of Things (IoT) service. SparkFun DEV-22462
No product available!
Compact expansion with advanced data monitoring features, equipped with temperature, humidity, light sensors and RTC clock. With low power consumption, battery monitoring function and I2C protocol support, it is ideal for long-term battery-powered projects, offering precise measurements and efficient power management. Seeed Studio 114993446
Data logger dedicated to monitoring and analysing electrical signals. It enables easy and precise data collection from a variety of sources, including power systems, industrial automation and other applications. It is powered by a rechargeable battery and has built-in Bluetooth communication. Hantek 365C
Data logger dedicated to monitoring and analysing electrical signals. Enables easy and precise data collection from a variety of sources, including power systems, industrial automation and other applications. Hantek 365A
No product available!
Set with OpenLog Artemis data logger. The set includes an I2C expander, a strain gauge module, a USB type C cable, a 1250 mAh LiPo battery, a 1 GB microSD card and all the necessary Qwiic cables. SparkFun KIT-18295