![WP3084ADAM - analog input module with RS485 interface](https://kamami.pl/71539-large_default/wp3084adam-analog-input-module-with-rs485-interface.jpg)
![WP3084ADAM - analog input module with RS485 interface](https://kamami.pl/71539-large_default/wp3084adam-analog-input-module-with-rs485-interface.jpg)
zł51.50 tax excl.
Module with 8 analog inputs for voltage measurement in the range from 0 to 10 V. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in an industrial housing. Wellpro WP3084ADAM
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Module with analog inputs supporting communication under the Modbus RTU protocol via the RS485 interface. It is equipped with 8 voltage measurement inputs in the range from 0 to 10 V. Support for the standard Modbus protocol facilitates the use of almost any automation software that supports Modbus RTU. The board has been enclosed in an industrial housing, and the DIN rail mounting system allows for easy installation and disassembly in control cabinets. It is perfect for automation systems that require control of multiple devices.
USB-RS485 converter for industrial applications. It provides communication between the USB interface and the RS485 serial standard. Waveshare USB TO RS485
USB-RS485 converter for industrial applications. It provides communication between the USB interface and the RS485 serial standard. Waveshare USB TO RS485 (B)
Module with analog output 0-20 mA or 4-20 mA. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in an industrial housing. Wellpro WP3076ADAM
Module with three 4-20 mA analog outputs. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in an industrial housing. Wellpro WP3078ADAM
Module with 8 inputs for data acquisition from DS18B20 temperature sensors. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in an industrial housing. Wellpro WP3066ADAM
8-channel IO expander with 6 analog inputs. It communicates via the USB interface. Version with Pull-Up resistors. Numato Lab GP80001P
No product available!
16-channel GPIO expander with an I2C interface microcontroller can interface with 16 fully configurable digital input/output pins. It can produce PWM signals, so you can dim LEDs. It can be set to blink or even breathe pins at varying rates. With a built-in keypad engine, it can interface with up to 64 buttons set up in an 8x8 matrix. BOB-13601
Module with a 16-channel GPIO expander with the ability to control LEDs. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4886
DAQ device based on USB communication and equipped with 96 digital inputs/outputs and a 32-bit counter. Digilent 6069-410-032
No product available!
32-channel IO expander with 7 analog inputs. It communicates via the USB interface. Numato Lab GP320001
Micro:Mate is an expansion board for the micro: bit development module. It provides six 3-pin connectors with I/O outputs, a 3.5mm audio jack connector and is powered from a 5V microUSB connector. DFRobot DFR0518
No product available!
I2C multiplexer module with TCA9548A system. Allows you to connect up to 8 devices. The system works like a gateway - it transmits I2C interface data to one of the 8 main busses. This allows you to connect up to 8 devices with the same address. Adafruit 2717
32-channel IO expander with 14 analog inputs. The board communicates via the Ethernet interface. Numato Lab GPETH320001
No product available!
Module with 16 digital inputs. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in an industrial housing. Wellpro WP8026ADAM
32-channel IO expander with 7 analog inputs. It communicates via the USB interface. Enclosure included. Numato Lab GP320001E
Module with three 4-20 mA analog outputs. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in an industrial housing. Wellpro WP3078ADAM
Module with 16-channel PCF8575 IO expander controlled by the I2C interface. Equipped with a STEMMA QT connector. Adafruit 5611
Module of the 8-channel I2C expander based on the TCA9548A system. It enables communication with many I2C devices that have the same address. Pimoroni 8086-006
No product available!
8-channel module with voltage analog inputs ranging from 0 to 10 V. After reconfiguration, it enables measurement of voltage in the range from 2 to 10 V or current in the range from 0 to 20 mA or 4 to 20 mA. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in a housing that can be mounted on an industrial rail. Waveshare Modbus RTU Analog Input 8CH (B)
No product available!
Module with 8 analog inputs for voltage measurement in the range from 0 to 10 V. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in an industrial housing. Wellpro WP3084ADAM