gator:starter ProtoSnap - temperature, light and RGB LED sensor module for micro:bit
ID: 1183649
zł38.90
Tax included
zł31.63 tax excl.
An accessory from the gator:boards series. The board has large pads dedicated for crocodile-type wires for easy connection to the micro:bit. It includes a temperature sensor module (MCP9700), a light sensor (TEMT6000) and an RGB LED board. SparkFun SEN-14891
Description
The gator:starter ProtoSnap is one of the accessories in the gator:boards series. The board has large pads dedicated for crocodile-type wires for easy connection to the micro:bit. It includes a temperature sensor module (MCP9700), a light sensor (TEMT6000) and an RGB LED board. Power can be connected to the edge of the module to power the board without breaking out each sensor or LED. It will work well for prototyping and development of micro:bit based projects. Full documentation is available on the product page.
Features
- gator:light:
- TEMT6000 sensor
- Adapted to the response of the human eye
- Wide angle half sensitivity ϕ = ± 60°
- gator:temperature:
- Analogue temperature sensor
- Temperature range: -40°C to 125°C
- gator:RGB:
- Tri-colour diode
- Common cathode
- Brightness control possible
- Dimensions: 92 x 50 mm
Kit contains
- gator:temperature Board (MCP9700)
- gator:light Board (TEMT6000)
- gator:RGB Board
1183649
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The module with a heart rate sensor and the SpO2 level dedicated to micro:bit. It is based on the MAX30102 chip and communicates via the I2C interface. SparkFun SEN-15271
zł62.77
24h
Available quantity: 1
Available
Soil moisture sensor dedicated to micro:bit. It is supplied with the voltage from 3.3 V to 5 V and communicates via an analog signal. SparkFun SEN-15272
zł48.84
24h
Available quantity: 3
Available
A module with an electret microphone, amplifier and ADC converter dedicated to micro: bit. It communicates via the I2C interface. SparkFun SEN-15289
zł40.61
24h
Available quantity: 2
Available
Data logger dedicated to micro:bit. It connects to the module via the UART interface and allows you to save data on a microSD card. SparkFun DEV-15270
zł73.80
24h
Available quantity: 1
Available
Module with the real time clock (RTC) RV-3028 dedicated to micro:bit. It communicates via the I2C interface. SparkFun SEN-15486
zł73.80
24h
Available quantity: 2
Available
Other products in the same category (16)
Module with RFID reader designed to work with micro:bit. It is equipped with a buzzer and can control two modeling servos. SB Components 21291
zł115.60
24h
Available quantity: 2
Available
The expansion module is designed for micro:bit v2. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103100063
zł58.30
24h
Available quantity: 2
Available
Multifunctional micro:bit expansion module with built-in Li-Ion battery. The board is equipped with a two-channel DC motor driver, 9 IO pins, I2C, UART interface, buzzer, 4 RGB LEDs and a charging circuit. DFRobot MBT0005
zł67.45
24h
Available quantity: 3
Available
Kit for building a simple educational robot Maqueen micro:bit chassis with engines, distance sensor, battery basket and necessary assembly elements. DFRobot ROB0148
zł213.36
24h
Available quantity: 10
Available
Data logger dedicated to micro:bit. It connects to the module via the UART interface and allows you to save data on a microSD card. SparkFun DEV-15270
zł73.80
24h
Available quantity: 1
Available
The IO expansion module is designed to work with the micro: bit educational board. There are 19 IO pins on the board, a buzzer and a voltage stabilization circuit are placed. DFRobot MBT0008
zł27.71
4 weeks
No product available!
The power module is designed to work with BBC micro:bit boards. It is equipped with a buzzer and a CR2032 battery socket. Kitronik 5610-V2
zł30.92
24h
Available quantity: 2
Available
Starter kit designed to work with micro: bit, which includes 8 modules including the most popular digital and analog sensors and executive modules. DFRobot TOY0086
zł419.71
4 weeks
No product available!
The IO expansion module is designed to work with the micro:bit educational board. There are 20 GPIO pins on the board, a buzzer and a voltage stabilization circuit
zł33.63
24h
Available quantity: 1
Available
Simple and compact protective case for the micro:bit. Made of transparent acrylic. PRT - 14335
zł28.12
24h
Available quantity: 2
Available
Adapter designed for micro:bit educational modules. It facilitates access to all pins, which are led out on the connector with a raster of 2.54 mm, which allows the use of a breadboard. SB Components 14880
zł31.89
24h
Available quantity: 3
Available
The SparkFun micro:climate kit is a full weather station kit that is built on top of the weather:bit carrier board. The set contains all the elements needed to build a weather station. Sparkfun KIT-16274
zł898.98
3 weeks
No product available!
A module with a set of environmental sensors (pressure, temperature and humidity sensor, light sensor, MEMS microphone) designed for micro:bit. Pimoroni PIM355
zł116.95
24h
Available quantity: 3
Available
Transparent protective case designed for micro:bit educational modules. SparkFun PRT-17867
zł39.11
3 weeks
No product available!
Audio module with loudspeaker designed to work with micro:bit. There is an amplifier and an 8 Ω 2 W speaker on the board. Pimoroni PIM356
zł82.73
24h
Available quantity: 2
Available
The expansion module is designed for micro:bit board. Controller: bit offers a fully functional controller module with a design based on a classic Nintendo controller. SparkFun DEV-16129
zł88.65
24h
Available quantity: 2
Available
An accessory from the gator:boards series. The board has large pads dedicated for crocodile-type wires for easy connection to the micro:bit. It includes a temperature sensor module (MCP9700), a light sensor (TEMT6000) and an RGB LED board. SparkFun SEN-14891