automation:bit - home automation extension module for micro:bit
ID: 585259
zł82.73
Tax included
zł67.26 tax excl.
Expansion module compatible with micro:bit. The board is equipped with a 24 V 2 A relay, two buffer inputs, two sink outputs and three analog inputs with a working range up to 24 V. Pimoroni PIM371
Description
Extension module designed for home automation projects compatible with micro:bit. The board is equipped with a 24 V relay with a maximum switchable current up to 2 A, two buffer inputs, two sink type outputs and three analog inputs with a working range up to 24 V. Thanks to this, the module can cooperate with devices operating with voltages of 12 V and 24 V. All inputs and outputs are led out to screw connections. The module can be programmed using the Microsoft MakeCode block editor. Documentation with a library and examples is available in the GitHub repository.
Features
- 1 x relay 24 V @ 2 A (NC and NO terminals)
- 3 x 12-bit analog input 0-24V
- 2 x 24 V buffer input
- 2 x 24V sink type output
- 3.5mm screw terminals
- Compatible with micro:bit and micro:bit v2
- Support for Microsoft MakeCode
585259
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Educational micro:bit module with 32-bit ARM Cortex-M4 microcontroller. Manufactured to interest the youngest in computer engineering. SparkFun DEV-17287
zł72.90
24h
Available quantity: 62
Available
Starter kit with micro:bit v2. In addition to the micro:bit v2 board, the set includes a microUSB-USB cable, a battery basket and two AAA batteries. SparkFun DEV-17288
zł94.89
24h
Available quantity: 19
Available
Module with 17x7 LED matrix display (119 LEDs) designed to work with micro:bit. It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM353
zł88.29
24h
Available quantity: 3
Available
A module with a set of environmental sensors (pressure, temperature and humidity sensor, light sensor, MEMS microphone) designed for micro:bit. Pimoroni PIM355
zł116.95
24h
Available quantity: 3
Available
Other products in the same category (16)
The IO expansion module is designed to work with the micro:bit educational board. There are 20 IO pins on the board, a buzzer, audio output and voltage stabilization circuit
zł29.89
Delivery date unknown
No product available!
The expansion module is designed for micro:bit sets. Offers a simple, beginner-friendly robotics controller. SparkFun DEV-15713
zł421.69
24h
Available quantity: 1
Available
Micro:bit expansion module designed for IoT. The board is equipped with WiFi, a two-channel output for DC motors, 6 IO pins, an I2C, UART interface, a buzzer, RGB diodes and a charging circuit. DFRobot MBT0012
zł209.86
24h
Available quantity: 1
Available
The module with 4 relays, designed to work with the micro:bit. It allows you to control devices with operating parameters up to 120VAC/2A or 24VDC/2A. SB Components 14118
zł84.48
24h
Available quantity: 1
Available
Adapter designed for micro:bit educational modules. It facilitates access to all pins, which are led out on the connector with a raster of 2.54 mm, which allows the use of a breadboard. SB Components 14880
zł31.89
24h
Available quantity: 3
Available
Silicone case designed for the micro:bit educational module. Yellow color. Seeed Studio 114991667
zł23.83
24h
Available quantity: 13
Available
Extension module with a breadboard designed for micro:bit. There are male and female connectors with all IO pins. A great solution for prototyping. DFRobot MBT0009
zł65.35
24h
Available quantity: 3
Available
The Pen Lifter pen holder is a set dedicated to the :MOVE Motor for BBC micro:bit. Thanks to the mounted servo, the holder allows you to raise and lower the pen, which can be controlled using a code. Kitronik 56118
zł35.35
24h
Available quantity: 5
Available
Audio module with loudspeaker designed to work with micro:bit. There is an amplifier and an 8 Ω 2 W speaker on the board. Pimoroni PIM356
zł82.73
24h
Available quantity: 2
Available
Module with RFID reader designed to work with micro:bit. It is equipped with a buzzer and can control two modeling servos. SB Components 21291
zł115.60
24h
Available quantity: 2
Available
Multifunctional expansion module dedicated to micro: bit V2. DFRobot MBT0042
zł206.03
24h
Available quantity: 1
Available
Qwiic adapter designed for micro:bit educational modules. Facilitates access to all pins that are led out on the connector with a pitch of 2.54 mm and the Qwiic connector. SparkFun BOB-16445
zł35.29
24h
Available quantity: 1
Available
The power module is designed to work with BBC micro:bit boards. It is equipped with a buzzer and a CR2032 battery socket. Kitronik 5610-V2
zł30.92
24h
Available quantity: 3
Available
A module with a set of environmental sensors (pressure, temperature and humidity sensor, light sensor, MEMS microphone) designed for micro:bit. Pimoroni PIM355
zł116.95
24h
Available quantity: 3
Available
The expansion module is designed for micro:bit board. Controller: bit offers a fully functional controller module with a design based on a classic Nintendo controller. SparkFun DEV-16129
zł88.65
24h
Available quantity: 2
Available
The expansion module with 6 Grove connectors for the micro:bit educational module. Seeed Studio 114991848
zł54.98
4 weeks
No product available!
Expansion module compatible with micro:bit. The board is equipped with a 24 V 2 A relay, two buffer inputs, two sink outputs and three analog inputs with a working range up to 24 V. Pimoroni PIM371