![DFRobot Gravity - 3-axis accelerometer I2C DFRobot Gravity - 3-axis accelerometer I2C](https://kamami.pl/29348-large_default/dfrobot-gravity-3-axis-accelerometer-i2c.jpg)
![DFRobot Gravity - 3-axis accelerometer I2C DFRobot Gravity - 3-axis accelerometer I2C](https://kamami.pl/29348-large_default/dfrobot-gravity-3-axis-accelerometer-i2c.jpg)
zł19.13 tax excl.
Module of the 3-axis LIS2DH, I2C accelerometer. DFRobot SEN0224
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Module of the 3-axis LIS2DH accelerometer. Sensor made in MEMS technology with I2C interface. The module has a built-in LDO regulator, thanks to which the module supply voltage can range from 3.3 - 5 V. The board also has a two-sided logic level converter that provides communication with both 3.3 V and 5 V systems.
Compared to the well-known ADXL345 accelerometer, LIS2DH is more stable and more energy-efficient. Accelerometer in low-power mode, consumes about 2 uA, while in normal mode it consumes up to 11 uA current. The maximum frequency of the measurement results is 5.3 kHz. Accelerometer sensitivity is programmable in several ranges: +/- 2 g, +/- 4 g, +/- 8 g or +/- 16 g. The sensor returns a 16-bit overload value in each axis. The accelerometer has two independent programmable interrupt generators for detecting free fall or movement, interrupting them awakening the system from sleep mode. This allows you to build systems to display the device's orientation or to recognize impacts or measure overloads.
A six-axis (Freis) three axis accelerometer + three axis magnetometer in a QFN16 housing. The sensor can measure the acceleration in the range of ± 2g / ± 4g / ± 8g and magnetic induction in the range of ± 1200μT
INEMO system: 3D accelerometer and 3D gyroscope in LGA16L housing, made by STMicroelectronics. Allows measurement of acceleration up to 16g and angular velocity up to 2000 degrees / second, communication takes place on the I2C / SPI bus
Module of the 3-axis LIS2DH, I2C accelerometer. DFRobot SEN0224
Module with a 3-axis analog MMA7361 accelerometer. There are 3 Gravity connectors on the board (for each axis). The operating range of the sensor can be configured using a DIP switch. DFRobot DFR0143
Module with 3-axis ADXL375 accelerometer with a wide measurement range up to ±200g. The board is equipped with a STEMMA QT connector and communicates via the I2C or SPI interface. Adafruit 5374
Module with a 3-axis H3LIS200DL accelerometer. The system has a user selectable wide measurement scale of ±100g/±200g. It communicates via the I2C interface. DFRobot SEN0408
Acceleration measurement module with ADXL335 3-axis analog accelerometer system. The module is supplied with the voltage from 1.8 to 3.6 V. SparkFun SEN-09269
No product available!
Module with a 3-axis H3LIS331 accelerometer with a measuring range up to ± 400g. The board is equipped with a STEMMA QT connector and communicates via the I2C interface. Adafruit 4627
BMA400 3-axis accelerometer module with a measurement range of up to ±16g. The board is equipped with a Qwiic connector and communicates via an I2C or SPI interface. SparkFun SEN-21208
Module with a 3-axis KX132 accelerometer. The system has a user selectable measurement scale of ± 2/±4/±8/±16g. There are two Qwiic connectors on the board and holes with a 2.54 mm pitch. SparkFun SEN-17871
Module with the LIS3DHTR 3-axis accelerometer. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 114020121
KAmodMC3635 is a module with the MC3635 three-axis accelerometer from mCube. The sensor allows the measurement of acceleration in the range of ±2g/±4g/±8g/±12g/±16g, the measurement frequency is from 14 to 1300 Hz. Communication with the sensor is realized via the I2C interface. The board is equipped with the Pmod I2C standard connector and the KAMAMI connector. Kamami KAmodMC3635
Module with the 3-axis MMA8452Q accelerometer. The system has a user selectable measurement scale of ±2g/±4g/±8g. There are two Qwiic connectors on the board and holes with 2.54 mm raster. SparkFun SEN-14587
KAmodMMA7361LC is an accelerometer module with an analogue output, equipped with the MMA7361LC chip. It has a embedded voltage regulator, so it can be used in systems supplied with voltage of 2.5...5.5V.
Module with 3-axis accelerometer ADXL343 and precise temperature sensor ADT7410 dedicated to Feather series boards. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4147
BMA400 3-axis accelerometer module with a measurement range of up to ±16g. The board is equipped with a Qwiic connector and communicates via an I2C interface. SparkFun SEN-21207
Module with a 3-axis BMA220 digital accelerometer with a configurable measuring range of ± 2/4/8/16 g. It is supplied with the voltage from 2 to 3.6 V and communicates via the I2C or SPI interface. DFRobot SEN0168
Module with a 3-axis LIS3DSH accelerometer. The board is equipped with a goldpin connector and communicates via the I2C or SPI interface
No product available!
Module of the 3-axis LIS2DH, I2C accelerometer. DFRobot SEN0224