Fermion: BMA220 Digital Triaxial Acceleration Sensor - module with an accelerometer

Module with a 3-axis analog MMA7361 accelerometer. There are 3 Gravity connectors on the board (for each axis). The operating range of the sensor can be configured using a DIP switch. DFRobot DFR0143

Module with a 3-axis KX132 accelerometer. The system has a user selectable measurement scale of ± 2/±4/±8/±16g. There are two Qwiic connectors on the board and holes with a 2.54 mm pitch. SparkFun SEN-17871

Triple-Axis Accelerometer Module +-3g, Analog-Output, RoHS

KAmodMMA7361LC is an accelerometer module with an analogue output, equipped with the MMA7361LC chip. It has a embedded voltage regulator, so it can be used in systems supplied with voltage of 2.5...5.5V.

PmodACL - 3-axis Accelerometer

KAmodMC3635 is a module with the MC3635 three-axis accelerometer from mCube. The sensor allows the measurement of acceleration in the range of ±2g/±4g/±8g/±12g/±16g, the measurement frequency is from 14 to 1300 Hz. Communication with the sensor is realized via the I2C interface. The board is equipped with the Pmod I2C standard connector and the KAMAMI connector. Kamami KAmodMC3635

KAmodMMA8653FC is a module with NXP's MMA8653FC three-axis accelerometer. The sensor allows the measurement of acceleration in the range of ± 2g / ± 4g / ± 8g, the measurement frequency is from 1.56 Hz to 800 Hz. Communication with the sensor takes place via the I2C interface

3-axis motion sensor module with digital output

KAmodMMA8451Q is a module with the MMA8451Q three-axis accelerometer from NXP. The sensor allows the measurement of acceleration in the range of ±2g/±4g/±8g, the measurement frequency is from 1.56 Hz to 800 Hz. Communication with the sensor is realized via the I2C interface. The board is equipped with the Pmod I2C standard connector and the KAMAMI connector. Kamami KAmodMMA8451Q

Module with a 3-axis LIS331HH accelerometer. The system has a user selectable measurement scale of ±6g/±12g/±24g. It communicates via the I2C interface. DFRobot SEN0407

Module with the 3-axis ADXL313 accelerometer with measuring ranges of ± 0.5 g, ± 1 g, ± 2 g or ± 4 g. The system is characterized by high 13-bit resolution and low power consumption. SparkFun SEN-17241

Module with a 3-axis MMA7660FC accelerometer with a measuring range up to ± 1.5g. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020039

Module with a 3-axis motion sensor MSA301 (accelerometer), which allows to measure acceleration in the range of ±2/±4/±8/±16 g. Communicates via the I2C bus. Pimoroni PIM456

The LIS3DH 12-bit 3-axis capacitive accelerometer module is a great tool for motion detection in your projects, capturing accelerations in three axes (3DoF). Simple configuration with SPI or I2C interface, as well as the ability to work on a breadboard, make the module user-friendly and perfect for various applications, from robotics to wearable devices. SparkFun SEN-20659

Module of the 3-axis LIS2DH, I2C accelerometer. DFRobot SEN0224

Module with 3-axis accelerometer ADXL343 and precise temperature sensor ADT7410 dedicated to Feather series boards. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4147