DFRobot Gravity - 3-axis accelerometer I2C
ID: 564495
5902186312760
zł23.53
Tax included
zł19.13 tax excl.
Module of the 3-axis LIS2DH, I2C accelerometer. DFRobot SEN0224
Description
Module of the 3-axis LIS2DH accelerometer. Sensor made in MEMS technology with I2C interface. The module has a built-in LDO regulator, thanks to which the module supply voltage can range from 3.3 - 5 V. The board also has a two-sided logic level converter that provides communication with both 3.3 V and 5 V systems.
Compared to the well-known ADXL345 accelerometer, LIS2DH is more stable and more energy-efficient. Accelerometer in low-power mode, consumes about 2 uA, while in normal mode it consumes up to 11 uA current. The maximum frequency of the measurement results is 5.3 kHz. Accelerometer sensitivity is programmable in several ranges: +/- 2 g, +/- 4 g, +/- 8 g or +/- 16 g. The sensor returns a 16-bit overload value in each axis. The accelerometer has two independent programmable interrupt generators for detecting free fall or movement, interrupting them awakening the system from sleep mode. This allows you to build systems to display the device's orientation or to recognize impacts or measure overloads.
properties
- Adjustable measurement sensitivity: ± 2 g / ± 4 g / ± 8 g / ± 16 g
- Frequency of presentation of the measurement results: 1 Hz-5.3 kHz
- 16-bit measurement data
- Interface: I2C
- 2 independent programmable interrupt generators to detect free fall or motion
- Built-in FIFO queue
- Built-in temperature sensor
- Detection of 6D or 4D orientation
- Gravity connector
- Working temperature: -40 ~ + 85 ℃
- Power supply: 3.3-5 V
- Operating current: 2 uA (low-power mode 50Hz ODR) or 11uA (normal mode 50Hz ODR)
- Module dimensions: 26.2 x 26.2 mm
- Weight: 12 g
Included
- Module with LIS2DH accelerometer
- Gravity connection cable
564495
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Available
A six-axis (Freis) three axis accelerometer + three axis magnetometer in a QFN16 housing. The sensor can measure the acceleration in the range of ± 2g / ± 4g / ± 8g and magnetic induction in the range of ± 1200μT
zł8.00
24h
Available quantity: 477
Available
INEMO system: 3D accelerometer and 3D gyroscope in LGA16L housing, made by STMicroelectronics. Allows measurement of acceleration up to 16g and angular velocity up to 2000 degrees / second, communication takes place on the I2C / SPI bus
zł27.95
Delivery date unknown
No product available!
Module of the 3-axis LIS2DH, I2C accelerometer. DFRobot SEN0224
zł23.53
Delivery date unknown
No product available!
Other products in the same category (16)
Module with a 3-axis ADXL343 accelerometer with a configurable measuring range of ±2g/±4g/±8g/±16g. Equipped with a STEMMA QT connector, it communicates via the I2C or SPI interface. Adafruit 4097
zł28.83
24h
Available quantity: 1
Available
Module with 3-axis digital accelerator ADXL345, SPI and I2C communication.
zł13.70
24h
Available quantity: 15
Available
KAmodLIS35DE is a module with a three-axis LIS35DE accelerator from STMicroelectronics. The chip has a digital signal output (I2C or SPI bus) and allows acceleration measurement in three axes.
zł19.90
24h
Available quantity: 462
Available
Module with the 3-axis ADXL313 accelerometer with measuring ranges of ± 0.5 g, ± 1 g, ± 2 g or ± 4 g. The system is characterized by high 13-bit resolution and low power consumption. SparkFun SEN-17241
zł84.69
24h
Available quantity: 1
Available
A module with a 3-axis accelerometer that allows you to measure acceleration in the range of ± 16g with a resolution of 13 bits. GY-291 ADXL345
zł14.30
24h
Available quantity: 30
Available
Module with the LIS3DHTR 3-axis accelerometer. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 114020121
zł24.06
24h
Available quantity: 1
Available
Module with a 3-axis BMA400 accelerometer with a measuring range up to ± 16g. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020582
zł43.53
24h
Available quantity: 3
Available
Module with BMA456 pedometer, which combines an acceleration sensor and built-in step counting algorithms. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 101020583
zł38.19
24h
Available quantity: 2
Available
KAmodMC3635 is a module with the MC3635 three-axis accelerometer from mCube. The sensor allows the measurement of acceleration in the range of ±2g/±4g/±8g/±12g/±16g, the measurement frequency is from 14 to 1300 Hz. Communication with the sensor is realized via the I2C interface. The board is equipped with the Pmod I2C standard connector and the KAMAMI connector. Kamami KAmodMC3635
zł14.90
24h
Available quantity: 452
Available
Module with a 3-axis H3LIS331 accelerometer with a wide measurement range up to ± 400g. It communicates via the I2C or SPI interface. SparkFun SEN-14480
zł90.64
24h
Available quantity: 2
Available
Module with a 3-axis ADXL345 digital accelerometer with a configurable measuring range of ± 2/4/8/16 g. It is supplied with the voltage from 2 to 3.6 V and communicates via the I2C or SPI interface. DFRobot SEN0032
zł28.55
24h
Available quantity: 2
Available
Module with a 3-axis BMA220 digital accelerometer with a configurable measuring range of ± 2/4/8/16 g. It is supplied with the voltage from 2 to 3.6 V and communicates via the I2C or SPI interface. DFRobot SEN0168
zł20.22
24h
Available quantity: 2
Available
Module with a 3-axis motion sensor MSA301 (accelerometer), which allows to measure acceleration in the range of ±2/±4/±8/±16 g. Communicates via the I2C bus. Pimoroni PIM456
zł33.53
24h
Available quantity: 2
Available
Module with a 3-axis KX132 accelerometer. The system has a user selectable measurement scale of ± 2/±4/±8/±16g. There are two Qwiic connectors on the board and holes with a 2.54 mm pitch. SparkFun SEN-17871
zł73.85
24h
Available quantity: 1
Available
Module with a 3-axis KX134 accelerometer. The system has a user selectable measurement scale of ±8/±16/±32/±64 g. There are two Qwiic connectors on the board and holes with a 2.54 mm pitch. SparkFun SEN-17589
zł175.73
3 weeks
No product available!
Set of sensors with cables. They can detect gestures, movement, touch, sound, and measure humidity, temperature, altitude and acceleration. SparkFun DEV-16156
zł815.50
3 weeks
No product available!
Module of the 3-axis LIS2DH, I2C accelerometer. DFRobot SEN0224