Qwiic Triple Axis Accelerometer Breakout - module with a 3-axis KX134 accelerometer
ID: 586121
5906623420933
zł96.64
Tax included
zł78.57 tax excl.
Module with a 3-axis KX134 accelerometer. The system has a user selectable measurement scale of ±8/±16/±32/±64 g. There are two Qwiic connectors on the board and holes with a 2.54 mm pitch. SparkFun SEN-17589
Description
Module with a 3-axis KX134 accelerometer. The chip has a user selectable measuring scale of ±8/±16/±32/±64 g and a resolution of 8 or 16 bits. The sensor can be configured to generate break signals, allowing detection of Freefall, Directional Tap and Double-Tap, as well as orientation and tilt. The KX134 can transmit data up to 10kHz, making it ideal for detecting vibrations and impacts. There are two Qwiic connectors on the board and holes with a 2.54 mm pitch. The module communicates via the I2C or SPI interface. The product page includes the user manual and the Arduino and Python library.
Features
- Range: ±8/±16/±32/±64 g selectable dynamically
- Data Rate (ODR) up to 10kHz
- 16 bit and 8 bit digital output
- Digital I2C interface (works up to 3.4 MHz)
- I2C address: 0x1E (default), 0x1F
- SPI interface up to 10 MHz
- Two programmable interrupt pins
- User configurable 3-stage data line with low pass filter, low / high pass filter and RMS calculation engine
- A wide range of built-in sensing functions: Free Fall, Directional-Tap, Double-Tap, Orientation
- Low noise: 130 µg / √Hz (depends on ODR, power mode and other settings)
- High resolution wake and sleep detection with customizable threshold from 3.9 mg
- 512-byte FIFO buffer that continues writing data while reading
- Low-power or high-performance operating modes
- Integrated voltage stabilizer
- 2 x Qwiic connector
- Current consumption: 0.5 μA - 148 μA
586121
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
No product available!
No product available!
Available
Module with a 3-axis KX132 accelerometer. The system has a user selectable measurement scale of ± 2/±4/±8/±16g. There are two Qwiic connectors on the board and holes with a 2.54 mm pitch. SparkFun SEN-17871
zł63.41
Delivery date unknown
No product available!
Flexible Qwiic cable, 150 mm long. On one side it is terminated with a female Qwiic connector, and on the other side with single female goldpin connectors. SparkFun PRT-17261
zł12.19
Delivery date unknown
No product available!
Other products in the same category (16)
This sensor communicates over I2C or SPI (our library code supports both) so you can share it with a bunch of other sensors on the same I2C bus. Adafruit 2809
zł28.28
24h
Available quantity: 6
Available
Module with a 3-axis H3LIS331 accelerometer with a wide measurement range up to ± 400g. It communicates via the I2C or SPI interface. SparkFun SEN-14480
zł68.15
3 weeks
No product available!
Available
Module with the 3-axis MMA8452Q accelerometer. The system has a user selectable measurement scale of ±2g/±4g/±8g. There are two Qwiic connectors on the board and holes with 2.54 mm raster. SparkFun SEN-14587
zł73.01
24h
Available quantity: 1
Available
Module with a 3-axis ADXL345 accelerometer with a configurable measuring range of ±2/±4/±8/±16 g. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020054
zł49.69
24h
Available quantity: 2
Available
Three-axis accelerometer module with MMA8452 system; I2C bus
zł5.41
24h
Available quantity: 8
Available
Module of the 3-axis LIS2DH, I2C accelerometer. DFRobot SEN0224
zł23.53
24h
Available quantity: 6
Available
KAmodLIS35DE is a module with a three-axis LIS35DE accelerator from STMicroelectronics. The chip has a digital signal output (I2C or SPI bus) and allows acceleration measurement in three axes.
zł19.90
24h
Available quantity: 473
Available
A module with a 3-axis accelerometer that allows you to measure acceleration in the range of ± 16g with a resolution of 13 bits. GY-291 ADXL345
zł14.33
24h
Available quantity: 11
Available
Module with a 3-axis H3LIS331 accelerometer with a measuring range up to ± 400g. The board is equipped with a STEMMA QT connector and communicates via the I2C interface. Adafruit 4627
zł130.82
24h
Available quantity: 2
Available
Module with 3-axis digital accelerator ADXL345, SPI and I2C communication.
zł13.71
24h
Available quantity: 7
Available
Module with a 3-axis LIS331HH accelerometer with a configurable measuring scale of ± 6g/±12g/±24g. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4626
zł64.03
24h
Available quantity: 2
Available
Module with a 3-axis ADXL343 accelerometer with a configurable measuring range of ±2g/±4g/±8g/±16g. Equipped with a STEMMA QT connector, it communicates via the I2C or SPI interface. Adafruit 4097
zł32.32
24h
Available quantity: 1
Available
GY-346 is a module with a digital acceleration sensor (accelerometer) ADXL346; communication on the I2C / SPI bus
zł22.99
4 weeks
No product available!
Module with a 3-axis H3LIS200DL accelerometer. The system has a user selectable wide measurement scale of ±100g/±200g. It communicates via the I2C interface. DFRobot SEN0408
zł77.15
4 weeks
No product available!
Module with a 3-axis BMA220 digital accelerometer with a configurable measuring range of ± 2/4/8/16 g. It is supplied with the voltage from 2 to 3.6 V and communicates via the I2C or SPI interface. DFRobot SEN0168
zł32.55
24h
Available quantity: 2
Available
Module with a 3-axis KX134 accelerometer. The system has a user selectable measurement scale of ±8/±16/±32/±64 g. There are two Qwiic connectors on the board and holes with a 2.54 mm pitch. SparkFun SEN-17589