

zł45.81 tax excl.
Module with a 3-axis LIS331HH accelerometer. The system has a user selectable measurement scale of ±6g/±12g/±24g. It communicates via the I2C interface. DFRobot SEN0407
Module with a 3-axis accelerometer with very low power consumption. It has a user selectable scale of ±6g/±12g/±24g and is capable of measuring accelerations with a data rate of 0.5 Hz to 1000 Hz. The sensor has two independent programmable interrupt outputs and dedicated algorithms to detect motion. The module communicates via the I2C interface and is supplied with the voltage of 3.3 V. Full documentation is available on the product Wiki page.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
A set of 40 pcs of male-female connecting cables in various colors, 10 cm long
Module with the LIS2DW12 3-axis accelerometer. The system has a user selectable measurement scale of ± 2g/±4g/±8g/±16g. There is a Gravity connector on the board. DFRobot SEN0409
Module with the LIS2DW12 3-axis accelerometer. The system has a user selectable measurement scale of ± 2g/±4g/±8g/±16g. It communicates via the I2C interface. DFRobot SEN0405
Module with a 3-axis KX134 accelerometer. The system has a user selectable measurement scale of ±8/±16/±32/±64 g. There are two Qwiic connectors on the board and holes with a 2.54 mm pitch. SparkFun SEN-17589
KAmodMMA8451Q is a module with the MMA8451Q three-axis accelerometer from NXP. The sensor allows the measurement of acceleration in the range of ±2g/±4g/±8g, the measurement frequency is from 1.56 Hz to 800 Hz. Communication with the sensor is realized via the I2C interface. The board is equipped with the Pmod I2C standard connector and the KAMAMI connector. Kamami KAmodMMA8451Q
Module with the 3-axis MMA8452Q accelerometer. The system has a user selectable measurement scale of ±2g/±4g/±8g. There are two Qwiic connectors on the board and holes with 2.54 mm raster. SparkFun SEN-14587
GY-346 is a module with a digital acceleration sensor (accelerometer) ADXL346; communication on the I2C / SPI bus
No product available!
Module with a 3-axis LIS331HH accelerometer with a configurable measuring scale of ± 6g/±12g/±24g. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4626
Set of sensors with cables. They can detect gestures, movement, touch, sound, and measure humidity, temperature, altitude and acceleration. SparkFun DEV-16156
No product available!
Module with a 3-axis H3LIS331 accelerometer with a wide measurement range up to ± 400g. It communicates via the I2C or SPI interface. SparkFun SEN-14480
No product available!
This sensor communicates over I2C or SPI (our library code supports both) so you can share it with a bunch of other sensors on the same I2C bus. Adafruit 2809
Module with the LIS2DW12 3-axis accelerometer. The system has a user selectable measurement scale of ± 2g/±4g/±8g/±16g. It communicates via the I2C interface. DFRobot SEN0405
Module with a 3-axis MMA7660FC accelerometer with a measuring range up to ± 1.5g. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020039
KAmodMC3635 is a module with the MC3635 three-axis accelerometer from mCube. The sensor allows the measurement of acceleration in the range of ±2g/±4g/±8g/±12g/±16g, the measurement frequency is from 14 to 1300 Hz. Communication with the sensor is realized via the I2C interface. The board is equipped with the Pmod I2C standard connector and the KAMAMI connector. Kamami KAmodMC3635
KAmodMMA7361LC is an accelerometer module with an analogue output, equipped with the MMA7361LC chip. It has a embedded voltage regulator, so it can be used in systems supplied with voltage of 2.5...5.5V.
Module with the 3-axis ADXL313 accelerometer with measuring ranges of ± 0.5 g, ± 1 g, ± 2 g or ± 4 g. The system is characterized by high 13-bit resolution and low power consumption. SparkFun SEN-17241
Module with a 3-axis ADXL345 accelerometer with a configurable measuring range of ±2/±4/±8/±16 g. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020054
Module with a 3-axis ADXL356B accelerometer with a measuring range up to ± 20g. The board is equipped with a Grove connector and communicates via the analog interface. Seeed Studio 101020637
Module with a 3-axis LIS331HH accelerometer. The system has a user selectable measurement scale of ±6g/±12g/±24g. It communicates via the I2C interface. DFRobot SEN0407