Qwiic Triple Axis Accelerometer Breakout - module with a 3-axis KX132 accelerometer
ID: 586120
zł63.25
Tax included
zł51.42 tax excl.
Module with a 3-axis KX132 accelerometer. The system has a user selectable measurement scale of ± 2/±4/±8/±16g. There are two Qwiic connectors on the board and holes with a 2.54 mm pitch. SparkFun SEN-17871
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Module with a 3-axis KX132 accelerometer. The chip has a user selectable measuring scale of ±2g/±4g/±8/±16 g and a resolution of 8 or 16 bits. The sensor can be configured to generate break signals, allowing detection of Freefall, Directional Tap and Double-Tap, as well as orientation and tilt. The KX132 can transmit data up to 10kHz, making it ideal for detecting vibrations and impacts. There are two Qwiic connectors on the board and holes with a 2.54 mm pitch. The module communicates via the I2C or SPI interface. The product page includes the user manual and the Arduino and Python library.
Features
- Range: ±2/±4/±8/±16 g selectable dynamically
- Data Rate (ODR) up to 10kHz
- 16 bit and 8 bit digital output
- Digital I2C interface (works up to 3.4 MHz)
- I2C address: 0x1E (default), 0x1F
- SPI interface up to 10 MHz
- Two programmable interrupt pins
- User configurable 3-stage data line with low pass filter, low / high pass filter and RMS calculation engine
- A wide range of built-in sensing functions: Free Fall, Directional-Tap, Double-Tap, Orientation
- Low noise: 130 µg / √Hz (depends on ODR, power mode and other settings)
- High resolution wake and sleep detection with customizable threshold from 3.9 mg
- 512-byte FIFO buffer that continues writing data while reading
- Low-power or high-performance operating modes
- Integrated voltage stabilizer
- 2 x Qwiic connector
- Current consumption: 0.5 μA - 148 μA
586120
You might also like
No product available!
No product available!
Available
Available
Module with a 3-axis KX134 accelerometer. The system has a user selectable measurement scale of ±8/±16/±32/±64 g. There are two Qwiic connectors on the board and holes with a 2.54 mm pitch. SparkFun SEN-17589
zł96.64
24h
Available quantity: 2
Available
Other products in the same category (16)
Module with the LIS3DHTR 3-axis accelerometer. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 114020121
zł24.06
24h
Available quantity: 3
Available
Module with 3-axis ADXL375 accelerometer with a wide measurement range up to ±200g. The board is equipped with a STEMMA QT connector and communicates via the I2C or SPI interface. Adafruit 5374
zł154.49
24h
Available quantity: 1
Available
Module with a 3-axis BMA220 digital accelerometer with a configurable measuring range of ± 2/4/8/16 g. It is supplied with the voltage from 2 to 3.6 V and communicates via the I2C or SPI interface. DFRobot SEN0168
zł22.93
24h
Available quantity: 3
Available
A module with a 3-axis accelerometer that allows you to measure acceleration in the range of ± 16g with a resolution of 13 bits. GY-291 ADXL345
zł15.97
24h
Available quantity: 13
Available
Module with a 3-axis ADXL343 accelerometer with a configurable measuring range of ±2g/±4g/±8g/±16g. Equipped with a STEMMA QT connector, it communicates via the I2C or SPI interface. Adafruit 4097
zł32.32
24h
Available quantity: 2
Available
Module with the 3-axis MMA8452Q accelerometer. The system has a user selectable measurement scale of ±2g/±4g/±8g. There are two Qwiic connectors on the board and holes with 2.54 mm raster. SparkFun SEN-14587
zł73.01
24h
Available quantity: 1
Available
Module with a 3-axis ADXL372 accelerometer with a measuring range up to ± 200g. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020632
zł199.00
6 weeks
No product available!
Module with a 3-axis analog MMA7361 accelerometer. There are 3 Gravity connectors on the board (for each axis). The operating range of the sensor can be configured using a DIP switch. DFRobot DFR0143
zł67.45
24h
Available quantity: 1
Available
Available
Module of the 3-axis LIS2DH, I2C accelerometer. DFRobot SEN0224
zł23.53
4 weeks
No product available!
KAmodMMA8451Q is a module with the MMA8451Q three-axis accelerometer from NXP. The sensor allows the measurement of acceleration in the range of ±2g/±4g/±8g, the measurement frequency is from 1.56 Hz to 800 Hz. Communication with the sensor is realized via the I2C interface. The board is equipped with the Pmod I2C standard connector and the KAMAMI connector. Kamami KAmodMMA8451Q
zł24.90
24h
Available quantity: 242
Available
BMA400 3-axis accelerometer module with a measurement range of up to ±16g. The board is equipped with a Qwiic connector and communicates via an I2C or SPI interface. SparkFun SEN-21208
zł37.82
24h
Available quantity: 2
Available
Available
Module with a 3-axis ADXL357 accelerometer with a measuring range up to ± 40g. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020639
zł449.00
6 weeks
No product available!
Module with a 3-axis H3LIS200DL accelerometer. The system has a user selectable wide measurement scale of ±100g/±200g. There is a Gravity connector on the board. DFRobot SEN0412
zł72.50
24h
Available quantity: 1
Available
GY-346 is a module with a digital acceleration sensor (accelerometer) ADXL346; communication on the I2C / SPI bus
zł28.34
24h
Available quantity: 5
Available
Module with a 3-axis KX132 accelerometer. The system has a user selectable measurement scale of ± 2/±4/±8/±16g. There are two Qwiic connectors on the board and holes with a 2.54 mm pitch. SparkFun SEN-17871