GY-291 ADXL345 - module with 3-axis ADXL345 accelerometer
ID: 582737
5906623460281
zł14.30
Tax included
zł11.63 tax excl.
A module with a 3-axis accelerometer that allows you to measure acceleration in the range of ± 16g with a resolution of 13 bits. GY-291 ADXL345
Description
Module with a 3-axis ADXL345 accelerometer, which allows to measure acceleration in the range of ± 16g with a resolution of 13 bits. It is powered with the voltage from 3 to 5 V and communicates via the I2C or SPI interface. The high resolution enables the measurement of the angle of inclination with an accuracy of 1 °, which makes the module suitable for e.g. in mobile devices. It can be used to measure both static and dynamic gravitational acceleration. The sensor has a built-in, inter alia, a free fall detector and a single and double "click" detection system.
Features
- Measurement range: ± 2g or ± 16g
- Resolution: 13 bits (4 mg/LSB)
- Detection of "clicks"
- Free fall detection
- Interface: I2C, SPI
- Operating voltage 3 to 5 volts
- Low current consumption: 40 uA in measurement mode, 0.1uA in standby
582737
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Pin header goldpin black 1x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.
zł1.23
24h
Available quantity: 2061
Available
Cables for evaluation boards, set of 10 pcs., blue colour
zł5.20
24h
Available quantity: 137
Available
Cables for evaluation boards, set of 10 pcs., red colour
zł5.20
24h
Available quantity: 99
Available
Cables for evaluation boards, set of 10 pcs., green colour
zł5.46
24h
Available quantity: 320
Available
A set of 10 female-female connection cables, in various colors, 17 cm long. CAB_F-F (Rainbow-10-17)
zł4.90
24h
Available quantity: 79
Available
Other products in the same category (16)
KAmodMC3635 is a module with the MC3635 three-axis accelerometer from mCube. The sensor allows the measurement of acceleration in the range of ±2g/±4g/±8g/±12g/±16g, the measurement frequency is from 14 to 1300 Hz. Communication with the sensor is realized via the I2C interface. The board is equipped with the Pmod I2C standard connector and the KAMAMI connector. Kamami KAmodMC3635
zł14.90
24h
Available quantity: 453
Available
Module with a 3-axis MMA7660FC accelerometer with a measuring range up to ± 1.5g. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020039
zł64.13
24h
Available quantity: 2
Available
Module with a 3-axis BMA400 accelerometer with a measuring range up to ± 16g. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020582
zł49.72
4 weeks
No product available!
Module with a 3-axis analog MMA7361 accelerometer. There are 3 Gravity connectors on the board (for each axis). The operating range of the sensor can be configured using a DIP switch. DFRobot DFR0143
zł67.45
24h
Available quantity: 1
Available
Module with the LIS2DW12 3-axis accelerometer. The system has a user selectable measurement scale of ± 2g/±4g/±8g/±16g. It communicates via the I2C interface. DFRobot SEN0405
zł20.09
24h
Available quantity: 3
Available
Module with a 3-axis LIS331HH accelerometer with a configurable measuring scale of ± 6g/±12g/±24g. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4626
zł64.03
4 weeks
No product available!
Available
Available
Module with a 3-axis LIS331HH accelerometer. The system has a user selectable measurement scale of ±6g/±12g/±24g. It communicates via the I2C interface. DFRobot SEN0407
zł56.35
4 weeks
No product available!
KAmodLIS35DE is a module with a three-axis LIS35DE accelerator from STMicroelectronics. The chip has a digital signal output (I2C or SPI bus) and allows acceleration measurement in three axes.
zł19.90
24h
Available quantity: 462
Available
KAmodMMA8653FC is a module with NXP's MMA8653FC three-axis accelerometer. The sensor allows the measurement of acceleration in the range of ± 2g / ± 4g / ± 8g, the measurement frequency is from 1.56 Hz to 800 Hz. Communication with the sensor takes place via the I2C interface
zł26.90
24h
Available quantity: 459
Available
Module with a 3-axis LIS3DSH accelerometer. The board is equipped with a goldpin connector and communicates via the I2C or SPI interface
zł7.40
24h
Available quantity: 15
Available
KAmodMMA7361LC is an accelerometer module with an analogue output, equipped with the MMA7361LC chip. It has a embedded voltage regulator, so it can be used in systems supplied with voltage of 2.5...5.5V.
zł28.91
24h
Available quantity: 192
Available
Module with the LIS2DW12 3-axis accelerometer. The system has a user selectable measurement scale of ± 2g/±4g/±8g/±16g. There is a Gravity connector on the board. DFRobot SEN0409
zł19.83
Delivery date unknown
No product available!
Module with a 3-axis MSA311 accelerometer with a configurable measuring range of ±2g/±4g/±8g/±16g. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5309
zł25.90
24h
Available quantity: 2
Available
Three-axis accelerometer module with MMA8452 system; I2C bus
zł5.41
24h
Available quantity: 5
Available
A module with a 3-axis accelerometer that allows you to measure acceleration in the range of ± 16g with a resolution of 13 bits. GY-291 ADXL345