modMMA8452 (GY-45-52) - three-axis accelerometer module with MMA8452
ID: 235157
5906623473229
zł5.41
Tax included
zł4.40 tax excl.
Three-axis accelerometer module with MMA8452 system; I2C bus
Description
Three-axis accelerometer module with MMA8452 system; I2C bus
properties
- Layout: MMA8452
- Dynamic ranges ± 2g / ± 4g / ± 8g
- Frequency of output data generation (ODR): 1.56 Hz - 800 Hz
- Own noise: 99μg / √ Hz
- Digital output: 12 or 8-bit
- Digital I2C interface (pulling up the line to supply 4.7 kΩ resistor, frequency: 2.25 MHz)
- Two programmable interrupt outputs for six interrupt sources
- Three channels of motion detection
- Detection of free fall
- Pulse detection
- Shock detection
- Automatic wake up and automatic low power consumption
- High-pass filtered data can be output to the output in real time
- Built-in sensor test option
- Power supply: 1.95 V - 3.6 V
- Bus voltage: 1.6 V - 3.6 V
- Power consumption: 6 μA - 165 μA
Application
- In electronic compasses
- In pedometers
- Identification of the direction of movement of the object
- Detection of the free fall of a laptop, E-book, disk
- 3D orientation in real time (eg in games)
- Detection of vibrations, shocks, strokes - compensation in mechatronics, registration of the transported item
To download
235157
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Available
Module with a 3-axis accelerometer with a resolution of 13bit (ADXL345), RoHS
zł12.62
24h
Available quantity: 5
Available
Accelerometer and gyroscope module, allows measurement of acceleration in the range of +/- 16 G and angular velocity in the range up to +/- 2000 dps. modMPU6500 (GY-6500)
zł10.32
24h
Available quantity: 19
Available
KAmodMMA7361LC is an accelerometer module with an analogue output, equipped with the MMA7361LC chip. It has a embedded voltage regulator, so it can be used in systems supplied with voltage of 2.5...5.5V.
zł28.91
24h
Available quantity: 198
Available
KAmodLSM6DS3 is a module that allows measurement of acceleration and angular velocity values. It has a built-in voltage stabilizer and level translators on SDA / SCL lines, thanks to which it can be used in 2.5-5.5V voltage systems
zł27.48
24h
Available quantity: 129
Available
KAmodMMA8451Q is a module with the MMA8451Q three-axis accelerometer from NXP. The sensor allows the measurement of acceleration in the range of ±2g/±4g/±8g, the measurement frequency is from 1.56 Hz to 800 Hz. Communication with the sensor is realized via the I2C interface. The board is equipped with the Pmod I2C standard connector and the KAMAMI connector. Kamami KAmodMMA8451Q
zł24.90
24h
Available quantity: 239
Available
Other products in the same category (16)
Triple-Axis Accelerometer Module +-3g, Analog-Output, RoHS
zł32.72
24h
Available quantity: 2
Available
Module with a 3-axis H3LIS200DL accelerometer. The system has a user selectable wide measurement scale of ±100g/±200g. There is a Gravity connector on the board. DFRobot SEN0412
zł72.50
4 weeks
No product available!
Module with a 3-axis KX134 accelerometer. The system has a user selectable measurement scale of ±8/±16/±32/±64 g. There are two Qwiic connectors on the board and holes with a 2.54 mm pitch. SparkFun SEN-17589
zł96.64
24h
Available quantity: 1
Available
No product available!
Module with a 3-axis KX132 accelerometer. The system has a user selectable measurement scale of ± 2/±4/±8/±16g. There are two Qwiic connectors on the board and holes with a 2.54 mm pitch. SparkFun SEN-17871
zł63.41
3 weeks
No product available!
A module with a 3-axis accelerometer that allows you to measure acceleration in the range of ± 16g with a resolution of 13 bits. GY-291 ADXL345
zł14.33
24h
Available quantity: 10
Available
Module with a 3-axis ADXL343 accelerometer with a configurable measuring range of ±2g/±4g/±8g/±16g. Equipped with a STEMMA QT connector, it communicates via the I2C or SPI interface. Adafruit 4097
zł32.32
24h
Available quantity: 1
Available
Module with a 3-axis accelerometer that allows you to measure acceleration in the range of ±16g with a resolution of 13 bits. It communicates via the SPI or I2C interface
zł40.87
24h
Available quantity: 15
Available
The LIS3DH 12-bit 3-axis capacitive accelerometer module is a great tool for motion detection in your projects, capturing accelerations in three axes (3DoF). Simple configuration with SPI or I2C interface, as well as the ability to work on a breadboard, make the module user-friendly and perfect for various applications, from robotics to wearable devices. SparkFun SEN-20659
zł34.97
24h
Available quantity: 1
Available
This sensor communicates over I2C or SPI (our library code supports both) so you can share it with a bunch of other sensors on the same I2C bus. Adafruit 2809
zł28.28
24h
Available quantity: 6
Available
Available
Module with a 3-axis BMA400 accelerometer with a measuring range up to ± 16g. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020582
zł49.72
24h
Available quantity: 3
Available
Module with a 3-axis ADXL356B accelerometer with a measuring range up to ± 20g. The board is equipped with a Grove connector and communicates via the analog interface. Seeed Studio 101020637
zł475.55
24h
Available quantity: 1
Available
Module with a 3-axis LIS331HH accelerometer. The system has a user selectable measurement scale of ±6g/±12g/±24g. It communicates via the I2C interface. DFRobot SEN0407
zł56.35
4 weeks
No product available!
KAmodMC3635 is a module with the MC3635 three-axis accelerometer from mCube. The sensor allows the measurement of acceleration in the range of ±2g/±4g/±8g/±12g/±16g, the measurement frequency is from 14 to 1300 Hz. Communication with the sensor is realized via the I2C interface. The board is equipped with the Pmod I2C standard connector and the KAMAMI connector. Kamami KAmodMC3635
zł14.90
24h
Available quantity: 453
Available
Module with a 3-axis ADXL345 accelerometer with a configurable measuring range of ±2/±4/±8/±16 g. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020054
zł49.69
24h
Available quantity: 2
Available
Three-axis accelerometer module with MMA8452 system; I2C bus