New products
New products
zł139.90
24h
Available
Available
Available
Available
Available
Qwiic Triple Axis Accelerometer Breakout - a module with a 3-axis MMA8452Q accelerometer
ID: 570703
5906623419944
zł73.01
Tax included
zł59.36 tax excl.
Module with the 3-axis MMA8452Q accelerometer. The system has a user selectable measurement scale of ±2g/±4g/±8g. There are two Qwiic connectors on the board and holes with 2.54 mm raster. SparkFun SEN-14587
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Module with the 3-axis MMA8452Q accelerometer. The system has a user selectable measurement scale of ±2g/±4g/±8g with high-pass filtered data as well as unfiltered data available in real time. The device can be configured to generate inertial interrupt signals, allowing you to monitor events and remain in a low-power mode during idle periods. The MMA8452Q can send data with 12-bit resolution and a frequency of up to 800 Hz. There are two Qwiic connectors on the board and holes with 2.54 mm raster. The product page includes the user manual and the Arduino library.
Features
- Range: ±2g/±4g/±8g selectable dynamically
- Data transmission frequency (ODR) between 1.56 Hz and 800 Hz
- 12-bit and 8-bit digital output
- Digital I2C interface (works up to 2.25 MHz with 4.7 kΩ pull-up)
- I2C address: 0x1D (default), 0x1C
- Two programmable interrupt pins for six interrupt sources
- Three built-in motion detection channels
- Orientation detection with set hysteresis
- Real-time high-pass filter data
- 2 x Qwiic connector
- Supply voltage from 1.95 V to 3.6 V
- Interface voltage 1.6 V to 3.6 V
- Current consumption: 6 μA - 165 μA
570703
You might also like
Pin header goldpin black 1x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.
zł1.09
24h
Available quantity: 3348
Available
Set of 40 pieces of male-female connection cables, in various colors, 17 cm long. CAB_M-F (Rainbow-40-17)
zł5.69
Delivery date unknown
No product available!
No product available!
No product available!
Available
Available
Other products in the same category (16)
Module with a 3-axis accelerometer with a resolution of 13bit (ADXL345), RoHS
zł11.61
24h
Available quantity: 4
Available
Module with a 3-axis MMA7660FC accelerometer with a measuring range up to ± 1.5g. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020039
zł64.13
24h
Available quantity: 4
Available
Module with a 3-axis analog MMA7361 accelerometer. There are 3 Gravity connectors on the board (for each axis). The operating range of the sensor can be configured using a DIP switch. DFRobot DFR0143
zł67.45
24h
Available quantity: 1
Available
KAmodMMA7361LC is an accelerometer module with an analogue output, equipped with the MMA7361LC chip. It has a embedded voltage regulator, so it can be used in systems supplied with voltage of 2.5...5.5V.
zł28.91
24h
Available quantity: 205
Available
Module with 3-axis ADXL375 accelerometer with a wide measurement range up to ±200g. The board is equipped with a STEMMA QT connector and communicates via the I2C or SPI interface. Adafruit 5374
zł133.98
24h
Available quantity: 2
Available
Module with a 3-axis LIS3DSH accelerometer. The board is equipped with a goldpin connector and communicates via the I2C or SPI interface
zł7.82
24h
Available quantity: 6
Available
A module with a 3-axis accelerometer that allows you to measure acceleration in the range of ± 16g with a resolution of 13 bits. GY-291 ADXL345
zł15.06
24h
Available quantity: 18
Available
Module with 3-axis accelerometer ADXL343 and precise temperature sensor ADT7410 dedicated to Feather series boards. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4147
zł67.90
24h
Available quantity: 2
Available
No product available!
This sensor communicates over I2C or SPI (our library code supports both) so you can share it with a bunch of other sensors on the same I2C bus. Adafruit 2809
zł26.56
24h
Available quantity: 6
Available
Module with the LIS3DHTR 3-axis accelerometer. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 114020121
zł24.06
24h
Available quantity: 3
Available
Module with BMA456 pedometer, which combines an acceleration sensor and built-in step counting algorithms. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 101020583
zł38.19
24h
Available quantity: 3
Available
Module with a 3-axis BMA400 accelerometer with a measuring range up to ± 16g. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020582
zł49.72
24h
Available quantity: 3
Available
KAmodMC3635 is a module with the MC3635 three-axis accelerometer from mCube. The sensor allows the measurement of acceleration in the range of ±2g/±4g/±8g/±12g/±16g, the measurement frequency is from 14 to 1300 Hz. Communication with the sensor is realized via the I2C interface. The board is equipped with the Pmod I2C standard connector and the KAMAMI connector. Kamami KAmodMC3635
zł14.90
24h
Available quantity: 458
Available
GY-346 is a module with a digital acceleration sensor (accelerometer) ADXL346; communication on the I2C / SPI bus
zł23.33
24h
Available quantity: 5
Available
KAmodMMA8451Q is a module with the MMA8451Q three-axis accelerometer from NXP. The sensor allows the measurement of acceleration in the range of ±2g/±4g/±8g, the measurement frequency is from 1.56 Hz to 800 Hz. Communication with the sensor is realized via the I2C interface. The board is equipped with the Pmod I2C standard connector and the KAMAMI connector. Kamami KAmodMMA8451Q
zł24.90
24h
Available quantity: 242
Available
Module with the 3-axis MMA8452Q accelerometer. The system has a user selectable measurement scale of ±2g/±4g/±8g. There are two Qwiic connectors on the board and holes with 2.54 mm raster. SparkFun SEN-14587