I2C converter for alphanumeric displays

The NFC module kit based on the ST25R3911B chip and the STM32F103RBT6 microcontroller enables wireless transfer of graphics from a microSD card to Waveshare e-Paper displays with NFC. Equipped with a 1.3" OLED display, a CP2102 USB-UART converter, 1 Mbit SRAM memory and user interfaces, it supports rapid prototyping of NFC applications and wireless communication systems. Waveshare 17623

Driver for e-Paper displays in the form of an overlay for Arduino and Nucleo. The SPI interface is used for communication with the controller. Waveshare e-Paper Shield

Driver enabling operation of displays with an RGB-666 connector with resolutions from 480x272 to 800x600 pixels. Equipped with an ESP32-S3 microcontroller with 16 MB Flash memory and 8 MB PSRAM memory. Powered and programmable via USB Type-C connector. Adafruit 5800

The magnetic holder is an ideal solution for mounting small USB monitors or phones. It provides a stable grip and is easy to install. Waveshare Magnetic Holder

FFC tape enabling seamless connection of DSI displays with the Raspberry Pi 5 minicomputer. EMI shielding foil on both sides of the tape increases anti-interference efficiency, protecting signals against interference from the environment. Waveshare Pi5-Display-Cable-300mm

FFC tape enabling seamless connection of DSI displays with the Raspberry Pi 5 minicomputer. Black EMI shielding foil on both sides of the tape increases anti-interference efficiency, protecting signals against interference from the environment. Waveshare Pi5-Display-Cable-500mm

Module with I2C driver based on the HT16K33 system. It is equipped with STEMMA QT connectors and is dedicated to 8x8 LED matrix displays with a diagonal of 1.2". Adafruit 1048

The LED_CGG128064M-XXW is a white LED backlight designed for COG displays of the "CF" series and graphic displays of the "MN" series. It operates at a voltage of approximately 3.3 V with a maximum current of 20 mA.

The ESL-Gateway-AP base station is a key infrastructure component for electronic label systems based on e-paper technology. With WiFi and BLE connectivity and PoE power support, it enables centralized and wireless content management on ESL labels in commercial and industrial environments. Ideal for automated real-time labeling of shelves, products, and assets.

An acrylic diffuser for Pico 2W Unicorn tiles that effectively softens and disperses the intense light from LEDs. The translucent layer makes the pixels larger, blurrier, and much easier on the eyes, improving comfort during long-term use. The kit is ideal for desktop installations, wall mounts, and decorative projects. Pimoroni PIM714

An acrylic diffuser for the Pico 2W Unicorn Galactic board, which effectively softens and disperses the intense light from LEDs. The translucent layer makes the pixels larger, blurrier, and much easier on the eyes, improving comfort during long-term use. The set is ideal for desktop installations, wall mounts, and decorative projects. Pimoroni PIM713

Magnetic stand for portable monitors compatible with screens from 4" to 18.5", equipped with an N52 neodymium magnet, multi-axis position adjustment, and a foldable design. Includes magnetic mounting rings. Waveshare Mini Monitor Stand (B)

Adjustable stand for portable monitors compatible with screens from 4" to 18.5", featuring multi-axis position adjustment. A weighted base and ergonomic design provide stability during use, while the foldable structure allows easy storage and transport. Waveshare Mini Monitor Stand (C)

Control board for 13.3" Spectra™ 6 ePaper displays, powered by the XIAO ESP32-S3 Plus. Enables quick creation of projects like digital photo frames and bulletin boards with real-time data display capabilities. The board supports power from a 3.7V Li-Ion battery or USB Type-C, and built-in buttons and SenseCraft HMI firmware make interactive control easy. A 60-pin adapter, FFC extension cable, and 2.4 GHz FPC antenna are included. SeeedStudio 100067144

This ePaper display control board is based on the nRF52840 microcontroller with Bluetooth 5.0 and NFC. It supports 24-pin and 50-pin FPC (0.5mm) panels, allowing for easy interface switching via jumpers. Power can be supplied by a 3.7V Li-Ion/Li-Po battery or via USB Type-C, and the built-in charging circuit and user-friendly buttons simplify the development of mobile IoT projects. SeeedStudio 100003489

This control board is designed to drive 10.3-inch monochrome ePaper displays with a resolution of 1404 × 1872 pixels and support for up to 16 grayscale levels. The module is based on the XIAO ESP32-S3 Plus chip, which provides high performance and Wi-Fi and Bluetooth wireless communication. The board is equipped with an SHT40 temperature sensor for display compensation, a 2.0 mm JST battery connector with charging circuitry, and a power switch. The pre-installed SenseCraft HMI software allows for drag-and-drop user interface creation without programming. Seeed Studio 100080566