

zł318.95 tax excl.
1 MPx camera module with OV9281 sensor working with NVIDIA Jetson Nano. Equipped with a shutter and M12 lens mount, it is characterized by good sensitivity. ArduCAM B0223
Monochrome camera module with a resolution of 1280 × 800 with OV9281 sensor designed for NVIDIA Jetson Nano minicomputers. It can be connected directly to the CSI-2 camera interface. The camera is equipped with a lens with a viewing angle of 130 °. The sensor uses OmniPixel3-GS ™ technology to provide 8/10-bit full-frame, sub-sampled and windowed MIPI images and can operate at up to 120 fps, while the shutter and excellent low-light sensitivity allow the module to be used for any application which requires gesture detection, tracking, and depth and motion detection. The camera does not have an IR filter and is therefore sensitive to infrared light. The set includes an acrylic protective case.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
3D stereo camera module, which was built of two cameras with OV2311 sensor. Designed to work with Raspberry Pi, Jetson Nano and Xavier NX. ArduCAM B0264
No product available!
1 MPx camera module with OV9281 sensor that works with all versions of the Raspberry Pi. Equipped with a shutter and M12 lens mount, it is characterized by good sensitivity. ArduCAM B0224
2 MPx camera module with OV2311 sensor working with NVIDIA Jetson Nano. Equipped with a shutter and M12 lens mount. Acrylic housing included. ArduCAM B0221
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
Camera module with Sony IMX219 sensor designed to work with NVIDIA Jetson Nano and RPi Compute Module. The camera is equipped with a matrix with a resolution of 8 MPx and has a viewing angle of 162°. Waveshare IMX219-160 IR-CUT Camera
A set with four OV9281 cameras with a resolution of 1MP and an expansion module for Raspberry Pi, Jetson Nano and Xavier NX, which allows you to simultaneously connect four cameras to the minicomputer. ArduCAM B0267
No product available!
A set of two cameras with a Sony IMX219 sensor, allows you to rotate the camera and control the tilt angle. Works with Jetson Nano and Xavier NX. The camera is equipped with an 8MP matrix. ArduCAM B0191PT
Base board dedicated to NVIDIA Jetson Nano modules. It offers numerous connectors, including M.2 Key E, 40-pin GPIO, Ethernet, USB 3.0, and HDMI and DisplayPort outputs. Waveshare JETSON-IO-BASE-A
Camera module designed for NVIDIA Jetson Nano/Xavier. The camera is equipped with a Sony IMX477 sensor with a lens and an IR-CUT filter. ArduCAM B0274
Camera with a resolution of 8 MPx with a USB interface. Equipped with a CMOS IMX219 sensor with a lens with a viewing angle of 62° and a 30 cm extension cord. ArduCAM B0320
No product available!
Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 or NVIDIA Jetson TX2i modules. It is equipped with MIPI CSI-2 connector, USB OTG, UART and I2C. It is characterized by great possibilities with small tile dimensions. Connect Tech ASG008
No product available!
Uninterruptible power supply (UPS) module for the Jetson Nano, allowing the minicomputer to continue working and shut down safely after a power failure. Uninterruptible power supply included. Waveshare UPS Power Module (EU)
No product available!
10.1" LCD IPS display with touch screen. The display is equipped with HDMI interface for image display and USB for touch screen. High resolution 1024x600 pixels. Waveshare 10.1inch HDMI LCD (E)
A sound card in the form of a small device with a USB plug, designed to work with the Raspberry Pi and NVIDIA Jetson Nano minicomputer. Waveshare USB TO AUDIO
Base plate for NVIDIA Jetson TX2 / TX2i and Jetson TX1 modules. Equipped with MIPI CSI-2, Mini-PCIe / mSATA extension, HDMI Video, USB 3.0 and 2.0 as well as two serial ports for RS-232/485. Connect Tech ASG002
No product available!
A set of accessories for building an autonomous racing robot based on the popular NVIDIA Jetson Nano development kit. Waveshare JetRacer AI Kit Acce
2 MPx camera module with OV2311 sensor working with NVIDIA Jetson Nano. Equipped with a shutter and M12 lens mount. Acrylic housing included. ArduCAM B0221
Module with minicamera based on IMX219 matrix with 8 MPx operation for Nvidia Jetson Nano, with 300 mm tape. ArduCAM B0185
Case made of transparent plastic designed for Nvidia Jetson Nano. It protects the minicomputer against dust and mechanical damage. Waveshare Jetson Nano Case (A)
Mini camera module with IMX477 HQ sensor for NVIDIA Jetson Nano and Xavier NX. Equipped with a lens with an M12 mount with a viewing angle of 75°. ArduCAM B0251
1 MPx camera module with OV9281 sensor working with NVIDIA Jetson Nano. Equipped with a shutter and M12 lens mount, it is characterized by good sensitivity. ArduCAM B0223