UPS Power Module (EU) - UPS uninterruptible power supply module for Jetson Nano
ID: 1182294
zł115.45
Tax included
zł93.86 tax excl.
Uninterruptible power supply (UPS) module for the Jetson Nano, allowing the minicomputer to continue working and shut down safely after a power failure. Uninterruptible power supply included. Waveshare UPS Power Module (EU)
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
UPS uninterruptible power supply module designed for NVIDIA Jetson Nano. When connected to four 18650-type batteries, it maintains a stable 5V output voltage even after power loss, allowing the device to continue operating and shut down safely. The state of charge of the battery is indicated by built-in LEDs, and full monitoring of the battery status is possible through the I2C interface and the built-in OLED display. It is connected to the Jetson Nano via a 6-pin connector. Full documentation is available on the product wiki page.
Attention!
The kit does not include the 18650 batteries. They must be purchased separately. Batteries with a length of up to 67 mm are suitable for the module.
Features
- I2C communication
- 0.91" OLED to display information such as battery voltage, IP address, RAM usage
- Real-time monitoring of battery voltage, current, power and capacity
- Overcharge/discharge protection circuitry, overcurrent protection, short circuit protection and reverse polarity protection
- Battery warning indicators
- Charging: 8.4 V 2 A
- Power supply: 4 x 18650 battery
- 5 V/2.5 A voltage stabilizer
- 6-pin connector with I2C interface
- Output voltage: 5 V
- Dimensions: 113 x 79 mm
Kit contains
- UPS Power Module (EU)
- AC adapter
- 6-pin 9 cm cable
- Set of screws
1182294
Other products in the same category (16)
5" LCD TFT display with touch screen. The display is equipped with HDMI and VGA interface for image display and USB for touch screen. Resolution 800x480 pixels. Waveshare 5inch HDMI LCD (H)
zł269.00
24h
Available quantity: 2
Available
Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 or NVIDIA Jetson TX2i modules. The board is equipped with a Mini PCI Express and mSATA connector, as well as a micro SD card slot. It is characterized by great possibilities with small tile dimensions. Connect Tech ASG001
zł4,012.21
6 weeks
No product available!
4G/3G/2G communication and GNSS positioning module. It allows you to make phone calls, support SMS, MMS, e-mail, TCP, UDP, DTMF, HTTP, FTP and has support for GPS, BeiDou, Glonass, LBS. Waveshare SIM7600G-H 4G for Jetson Nano
zł383.06
24h
Available quantity: 3
Available
Module with IMX462 sensor working with Raspberry Pi and Jetson Nano. It has a 2 MP matrix and a lens with a 99° angle of view. Waveshare IMX462-99 2MP Starlight Camera
zł392.99
24h
Available quantity: 3
Available
Fan set with heatsink for the NVIDIA Jetson TX1 / TX2 mini computer. DCV-01672-N2-GP
zł206.98
6 weeks
No product available!
A set with four OV9281 cameras with a resolution of 1MP and an expansion module for Raspberry Pi, Jetson Nano and Xavier NX, which allows you to simultaneously connect four cameras to the minicomputer. ArduCAM B0267
zł1,544.72
4 weeks
No product available!
Starter Cable Kit for Spacely Carrier. Connect Tech CKG045
zł790.08
6 weeks
No product available!
5G/4G/3G and GNSS module with SIM8200EA-M2 chip. It allows you to make phone calls, SMS support, cloud communication and has support for GPS, Galileo, BeiDou, Glonass and QZSS. Waveshare SIM8200EA-M2 5G for Jetson Nano (EU)
zł1,795.09
4 weeks
No product available!
Set with HQ camera, HDMI adapter, lens, tripod. Designed for NVIDIA Jetson Nano and Xavier NX. ArduCAM B0250
zł593.54
24h
Available quantity: 1
Available
Set with camera and wide angle lens. The set is designed to work with the NVIDIA Jetson Nano computer. ArduCAM B0249
zł405.58
24h
Available quantity: 6
Available
An expansion module for NVIDIA Jetson Nano development kits. It is equipped with a number of environmental sensors. Waveshare Environment Sensor for Jetson Nano
zł220.13
24h
Available quantity: 2
Available
10.5" AMOLED display with touch screen. Equipped with HDMI interface for image display and USB for touch screen. Has a resolution of 2560x1600 pixels. Waveshare 10.5inch HDMI AMOLED
zł946.07
24h
Available quantity: 2
Available
Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 4GB or NVIDIA Jetson TX2i modules. It is equipped with an Ethernet connector, microSD, UART, I2C and GPIO interfaces, USB 2.0 OTG, USB 3.0 ports, 4-line MIPI (I-PEX), CAN, HDMI 2.0 connector and a 7-pin SATA connector. Connect Tech ASG016
zł2,190.84
6 weeks
No product available!
IPS 4" LCD display with touch screen. Equipped with HDMI interface for image display and USB type C and I2C for touch screen. Resolution 720x720 pixels. Waveshare 4inch HDMI LCD (C)
zł288.74
24h
Available quantity: 2
Available
Kit for the construction of the intelligent JetBot robot based on Jetson Nano. It consists of a board (module with OLED display, battery basket and motor controller), expansion module with connectors, cameras with Sony IMX219 image sensor, motors, housing and a set of mounting screws. It is also equipped with a 2.4/5 GHz WiFi module and Bluetooth 4.2. Waveshare JetBot AI Kit Accesories
zł495.91
24h
Available quantity: 4
Available
Base board for NVIDIA Jetson AGX Xavier modules. Equipped with MIPI CSI-2, NVMe M.2 Key M, HDMI, USB 3.1, Ethernet (RJ-45), CAN Bus and power connector. Connect Tech AGX101
zł7,986.13
6 weeks
No product available!
Uninterruptible power supply (UPS) module for the Jetson Nano, allowing the minicomputer to continue working and shut down safely after a power failure. Uninterruptible power supply included. Waveshare UPS Power Module (EU)