ArduCAM 2MP OV2311 Global Shutter M12 Mount NoIR Mono Camera - camera with OV2311 sensor for Jetson Nano
ID: 586903
5906623403981
zł523.50
Tax included
zł425.61 tax excl.
2 MPx camera module with OV2311 sensor working with NVIDIA Jetson Nano. Equipped with a shutter and M12 lens mount. Acrylic housing included. ArduCAM B0221
Description
Monochrome camera module with a resolution of 1600x1300 with an OV2311 sensor designed for NVIDIA Jetson Nano minicomputers. It can be connected directly to the CSI-2 camera interface. The camera is equipped with a lens with a viewing angle of 83 °. The sensor uses OmniPixel3-GS ™ technology to provide 8/10-bit full-frame, sub-sampled and windowed MIPI images and can operate at speeds up to 60 fps. The camera does not have an IR filter and is therefore sensitive to infrared light. The set includes an acrylic protective case.
Features
- Matrix: OV2311 (monochrome)
- Resolution: 1 Mpx (1600x1300 pixels)
- Optical Size: 1 / 2.9 inch
- Pixel size: 3 μm x 3 μm
- Sensitive to IR, no filter
- Focusing range: 30 mm to infinity
- Output interface: 2-lane MIPI CSI-2
- Output formats: 8/10-bit BW RAW
- FoV: 83 ° (H)
- Mounting: M12
- Input clock frequency: 6 ~ 27MHz
- Maximum signal-to-noise ratio: 37.4 dB
- Dynamic range: 68 dB
- Dimensions: 40 x 40 mm
Kit contains
- Arducam OV2311 2 MP
- Arducam Adapter Board for Jetson Nano
- 150mm 15pin 1.0mm FPC cable
- 73mm 15pin 1.0mm to 22pin 0.5mm pitch FPC cable
- Acrylic case for the camera module
586903
Data sheet
- Resolution
- 2Mpx
- Interface
- MIPI CSI-2
- Sensor
- OV2311
- IR filter
- No
- Lens assembly
- M12
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
3D stereo camera module, which was built of two cameras with OV2311 sensor. Designed to work with Raspberry Pi, Jetson Nano and Xavier NX. ArduCAM B0264
zł1,161.45
Delivery date unknown
No product available!
2 MPx camera module with OV2311 sensor working with NVIDIA Jetson Nano. Equipped with a shutter and M12 lens mount. Acrylic housing included. ArduCAM B0221
zł523.50
Delivery date unknown
No product available!
Jetson Nano Dev Kit with ARM Cortex-A57 1.43 GHz CPU, 4 GB RAM and NVIDIA Maxwell GPU - Waveshare...
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
zł1,055.36
24h
Available quantity: 1
Available
Other products in the same category (16)
Cooling fan dedicated to the minicomputer NVIDIA Jetson Xavier NX. Waveshare NX-FAN-PWM
zł58.62
24h
Available quantity: 2
Available
Metal housing with a camera holder and a hole for a fan. Designed for the NVIDIA Jetson Orin Nano or Jetson Orin NX development kit. Waveshare JETSON-ORIN-CASE-A
zł62.79
24h
Available quantity: 14
Available
Metal case with fan hole and a camera holder. Designed for the NVIDIA Jetson Nano development kit. Jetson Nano Case (C)
zł57.59
4 weeks
No product available!
Mini base board dedicated to NVIDIA Jetson Nano modules. It offers basic connectors, including M.2 Key B, 40-pin GPIO, Ethernet, USB, CSI and HDMI output. It has compact dimensions, making it ideal for projects with limited space. Waveshare JETSON NANO MINI (EU)
zł316.69
24h
Available quantity: 2
Available
Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 or NVIDIA Jetson TX2i modules. It is equipped with MIPI CSI-2 connector, USB OTG, UART and I2C. It is characterized by great possibilities with small tile dimensions. Connect Tech ASG008
zł982.97
2 weeks
No product available!
Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 or NVIDIA Jetson TX2i modules. The board is equipped with a Mini PCI Express and mSATA connector, as well as a micro SD card slot. It is characterized by great possibilities with small tile dimensions. Connect Tech ASG001
zł4,012.21
2 weeks
No product available!
A sound card in the form of a small device with a USB plug, designed to work with the Raspberry Pi and NVIDIA Jetson Nano minicomputer. Waveshare USB TO AUDIO
zł32.69
24h
Available quantity: 8
Available
CMOS Camera Module IMX219 with M12/CS mount for Jetson and Raspberry Pi CM4 – Seeed Studio 102110719
The Seeed Studio 102110719 camera module with a Sony IMX219 sensor supports both 15- and 22-pin CSI connectors, offering high flexibility in optics selection and applications. Designed for Jetson platforms and Raspberry Pi CM4, it is suitable for AI projects, surveillance, and robotics. Seeed Studio 102110719
zł83.62
4 weeks
No product available!
The SIM7600G-H HAT module adds global 4G LTE connectivity and GNSS functions to the Jetson Nano, supporting data transmission, SMS, and voice calls. With UART, USB, and GPIO interfaces and support for AT Commands, it is suitable for IoT projects, remote monitoring systems, and mobile AI applications.
zł474.40
4 weeks
No product available!
Camera module with Sony IMX219 sensor designed to work with NVIDIA Jetson Nano and Raspberry Pi Compute Module, RDK X3, VisionFive2, etc. It is equipped with a matrix with a resolution of 8 MPx and has a viewing angle of 200°. Waveshare IMX219-200 Camera
zł106.17
24h
Available quantity: 4
Available
5" LCD TFT display with touch screen. The display is equipped with HDMI and VGA interface for image display and USB for touch screen. Resolution 800x480 pixels. Waveshare 5inch HDMI LCD (H)
zł210.26
24h
Available quantity: 4
Available
Expansion module with an industrial interface RS485 and CAN dedicated to minicomputers NVIDIA Jetson Nano. Equipped with protection and electrical insulation. Waveshare RS485 CAN for Jetson Nano
zł93.53
24h
Available quantity: 1
Available
A set of accessories for building an autonomous racing robot based on the popular NVIDIA Jetson Nano development kit. Waveshare JetRacer AI Kit Acce
zł1,175.49
24h
Available quantity: 1
Available
A two-part metal case with a fan designed to build a set with Orbitty Carrier and NVIDIA Jetson TX1 or NVIDIA Jetson TX2. Connect Tech ENC001+XHG302
zł1,012.65
2 weeks
No product available!
The case is designed for NVIDIA Jetson Nano minicomputers. It is made of aluminum, has a built-in power and reset button and space for a fan or heatsink. Waveshare Jetson Nano Case (F)
zł116.53
4 weeks
No product available!
Fan set with heatsink for the NVIDIA Jetson TX1 / TX2 mini computer. DCV-01672-N2-GP
zł206.98
2 weeks
No product available!
2 MPx camera module with OV2311 sensor working with NVIDIA Jetson Nano. Equipped with a shutter and M12 lens mount. Acrylic housing included. ArduCAM B0221