4-channel stereo audio mixer module with one output
ID: 588080
5906623448470
zł72.56
Tax included
zł58.99 tax excl.
4-channel stereo audio mixer module. It has one output to which the summed signal from 4 inputs comes out. It is powered with the voltage from 5 to 12 V
Description
4-channel stereo audio mixer module that uses NJM3414 low voltage and high current op amps. It has one output, on which the summed signal from 4 inputs is available and to which the user can connect headphones or an amplifier. The volume level of each input channel is adjusted with potentiometers without affecting the level of other signals. Both inputs and outputs are connected via 3.5 mm mini jack audio connectors. There is also a switch on the board and a diode indicating the device's activation status. The module is powered via the DC connector with the voltage from 5 to 12 V and can consume up to 70 mA.
Features
- Number of inputs: 4
- Number of outputs: 1
- Input and output connectors: 3.5 mm stereo mini jack
- Possibility to connect headphones or an amplifier
- Adjusts the volume level of each input channel
- NJM3414 operational amplifier
- Power connector: DC 5.5 x 2.5 mm
- Power switch and LED
- Power supply: 5 to 12 volts
- Current consumption: up to 70 mA
- Dimensions: 108 x 43 mm
588080
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Audio cable with 3.5 mm 3-pin minijack 1,2 m length. LANBERG CA-MJMJ-10CC-0012-BK
zł2.50
24h
Available quantity: 22
Available
Audio cable with 3.5 mm 3-pin minijack plugs, 2 m length. LANBERG CA-MJMJ-10CC-0020-BK
zł3.11
24h
Available quantity: 16
Available
Audio cable with 3.5 mm 3-pin minijack and 2x RCA (cinch), 2 m length. LANBERG CA-MJRC-10CC-0020-BK
zł3.51
24h
Available quantity: 13
Available
4-channel stereo audio mixer in a metal housing. It has one output, on which the summed signal from 4 inputs is available. It is powered with the voltage from 5 to 12 V.
zł100.77
24h
Available quantity: 2
Available
Compact power supply with a voltage of 12V and a power of 24W, suitable for devices with low power consumption. It has a 5.5 x 2.1 mm connector, often found in industrial cameras, CCTV systems, routers and LED strips. Akyga AK-TB-17
zł34.37
24h
Available quantity: 6
Available
Other products in the same category (16)
Class-D stereo digital audio amplifier module PAM8403. The system allows you to connect two speakers with an impedance of 4 to 8 Ω and a power of 3 W. DFRobot DFR0119-O
zł24.77
4 weeks
No product available!
The Class D digital audio amplifier module has two channels with a power of 30 W and can work with speakers from 4 to 8 Ω. Powered with the voltage ranging from 8 to 26 V. Bluetooth communication
zł29.67
24h
Available quantity: 14
Available
Digital audio amplifier dedicated to woofers. It has one channel with a power of 50W and can work with speakers from 4 to 8 Ω. It is powered with the voltage from 8 to 25 V
zł49.90
24h
Available quantity: 3
Available
Audio module with speakers designed to work with the Raspberry Pi Pico. Waveshare Pico-Audio
zł53.90
24h
Available quantity: 2
Available
Analog input/output module used for testing the integrated AD/DA function of MCUs
zł18.68
24h
Available quantity: 1
Available
Class D digital audio amplifier. It has two channels with a power of 50 W and can work with speakers from 4 to 8 Ω. It is powered with the voltage from 11 to 26 V
zł63.22
4 weeks
No product available!
Expansion module with audio and video outputs dedicated to Raspberry Pi Pico boards. It has a VGA output, SD card slot, audio outputs and control buttons. Pimoroni PIM553
zł146.00
24h
Available quantity: 2
Available
Class D PAM8403 stereo digital audio amplifier module. The system allows you to connect two speakers from 4 to 8 Ω with a power of 3 W per channel. modPAM8403
zł2.36
24h
Available quantity: 38
Available
Zeenko ZK07-BM is a low-noise, wideband amplifier with very high gain, powered by a battery and intended for operation in the 30 MHz – 6 GHz band. Ideal for compensating losses in long antenna lines, it provides up to 43 dB of gain and very good noise performance. Recommended for installation as close to the antenna as possible in receiving and measurement paths.
zł103.97
6 weeks
No product available!
PAM8610 digital stereo audio amplifier module. The system allows you to connect two speakers with an impedance from 4 to 8 Ω and a power of 10 W
zł17.26
4 weeks
No product available!
TDA7297 stereo audio digital amplifier module. The system allows you to connect two speakers with an impedance from 4 to 8 Ω and a power of 15 W
zł14.88
4 weeks
No product available!
Class D digital audio amplifier with Bluetooth 5.0 module. It has two channels with a power of 300 W and can work with 4 Ω speakers. Powered by alternating voltage 230 V
zł509.10
4 weeks
No product available!
Class D digital audio amplifier with Bluetooth module. It has two channels with a power of 50 W and can work with speakers from 4 to 8 Ω. It is powered with the voltage in the range from 9 to 24 V. NS-01G
zł135.42
4 weeks
No product available!
HiFi stereo tube amplifier based on 6J1 and 6P1 tubes. Designed for use with loudspeakers up to 3 W and an impedance of 4 Ω or 8 Ω
zł613.40
24h
Available quantity: 1
Available
The LM4950 audio power amplifier module with a power of 3 W per channel, powered by 10-15 VDC, equipped with a 3.5 mm Jack socket for audio input and screw connections for loudspeaker outputs, is equipped with thermal and short-circuit protection. It provides good sound quality with low energy consumption, making it ideal for small audio systems
zł26.49
24h
Available quantity: 104
Available
The board has a class D amplifier onboard that can drive 2 channels of 4-8 ohm impedance speakers at 20W each. Adafruit 1752
zł104.89
24h
Available quantity: 1
Available
4-channel stereo audio mixer module. It has one output to which the summed signal from 4 inputs comes out. It is powered with the voltage from 5 to 12 V