![SIM7000C NB-IoT / LTE / GPRS / GPS - shield for Arduino SIM7000C NB-IoT / LTE / GPRS / GPS - shield for Arduino](https://kamami.pl/31814-large_default/sim7000c-nb-iot-lte-gprs-gps-shield-for-arduino.jpg)
![SIM7000C NB-IoT / LTE / GPRS / GPS - shield for Arduino SIM7000C NB-IoT / LTE / GPRS / GPS - shield for Arduino](https://kamami.pl/31814-large_default/sim7000c-nb-iot-lte-gprs-gps-shield-for-arduino.jpg)
zł206.10 tax excl.
NB-IoSIM7000C Arduino NB-IoT / LTE / GPRS / GPS Expansion Shield is an advanced expansion board for Arduino. It has support for SIM cards and NB-IoT cards. Thanks to the GNSS module (Global Navigation Satellite System), it supports GPS, GLONASS, Galileo, QZSS and BeiDou GPS navigation systems. The module is powered by 7 ... 12V voltage. DFRobot DFR0505
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
SIM7000C Arduino NB-IoT / LTE / GPRS / GPS Expansion Shield is an advanced expansion board with wireless communication modules designed for Arduino . Based on the SIM7000C SIMCom chip. The module supports multi-frequency LTE-FDD, GPRS / EDGE and NB-IoT communication.
The NB-IoT technology (Narrow Band-Internet of Things) is a new technical area of IoT and supports the connection to the cellular network of low power devices in the WAN network (Wide Area Network), also known as LPWAN. NB-IoT operates in an authorized frequency spectrum. It can be directly implemented in GSM, UMTS, LTE without any disruption to current networks.
The expansion board has a built-in GNSS module (Global Navigation Satellite System) that supports GPS, GLONASS, Galileo, QZSS and BeiDou GPS navigation systems. It has SIM card inputs (thanks to which it can be used for standard operations performed on the phone, like calling or sending an SMS), as well as for the NB-IoT card, which enables communication within the NB-IoT technology. In addition, the module has a BME280 environmental sensor that allows monitoring of temperature, humidity and pressure, eg in the framework of NB-IoT.
Attention!
No product available!
Introducing Adafruit FONA 808 GSM + GPS Shield, an all-in-one cellular phone module with that lets you add location-tracking, voice, text, SMS and data to your project, in Arduino shield format for easy use. Adafruit 2636
No product available!
GPRS, DTMF, TTS speech all in one shield. Its operating freqency is EGSM 900MHz/DCS 1800MHz and GSM850 MHz/PCS 1900MHz. TEL0089
BME280 integrates onboard temperature sensor, humidity sensor and barometer. It provides both SPI and I2C interfaces; and can be widely used in environmental monitoring, story height measurement and Internet of Things (IoT) control and so on. SEN0236
No product available!
This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its dual robust VNH5019 motor drivers operate from 5.5 to 24 V and can deliver a continuous 12 A (30 A peak) per motor, or a continuous 24 A (60 A peak) to a single motor connected to both channels. Pololu 2507
No product available!
Extension board for Arduino Nano and Uno, 14 GPIO lines, connectors with I2C and UART interface lines. The board also has a RESET button and a voltage stabilizer
Multifunctional expander (shield) for NUCLEO and Arduino equipped with Bluetooth 2.0+EDR (HC-05) interface, MEMS 3DoF LIS35, LED-RGB, joystick and analog STLM20 temperature sensor developed and produced by KAMAMI.
Gravity: Heart Rate Monitor Sensor is a sensor used to measure heart activity. Adapted for easy use with Arduino. SparkFun SEN0213
This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its twin discrete MOSFET H-bridges support a wide 6.5 V to 30 V operating range and are efficient enough to deliver a continuous 18 A without a heat sink.
This Kit with fully-dedicated PWM driver chip handles all the motor and speed controls over I2C. Only two data pins (SDA & SCL in addition to the power pins GND & 5V) are required to drive the multiple motors; you can also connect any other I2C devices or shields to the same pins. This makes it drop-in compatible with any Arduino, such as the Uno, Due, Leonardo and Mega R3. Adafruit 1438
No product available!
Dual-channel electric motors controller (H-bridge) Arduino Motor Shield Rev3 with L298 for controlling two DC motors or one stepper motor with the possibility of using an electronic brake.
Arduino Multifunctional Shield; LED, 7seg, buzzer, switch
Gravity: IO Expansion & Motor Driver Shield is an Arduino compatible expansion board that provides digital I / O ports, analog I2C, SPI and UART interfaces, as well as a DC motor driver. DFRobot DFR0502
The shield provides the standard MIDI port circuits, incl. 5-pin DIN connectors, pto-isolated MIDI input, LEDs on D6 and D7, pushbuttons on D2, D3 and D4, and rotary potentiometers on A0 and A1. DEV-12898
No product available!
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with soldered connectors. Pololu 5042
No product available!
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with connectors for self-assembly. Pololu 5046
No product available!
Shield - Xbee w / o RF module
Shield designed for IoT applications with LTE CAT M1/NB-IoT SARA-R4 modem. The board is compatible with Arduino, allows you to add communication via cellular networks to Arduino boards. SparkFun CEL-14997
NB-IoSIM7000C Arduino NB-IoT / LTE / GPRS / GPS Expansion Shield is an advanced expansion board for Arduino. It has support for SIM cards and NB-IoT cards. Thanks to the GNSS module (Global Navigation Satellite System), it supports GPS, GLONASS, Galileo, QZSS and BeiDou GPS navigation systems. The module is powered by 7 ... 12V voltage. DFRobot DFR0505