![Main view Main view](https://kamami.pl/66300-large_default/32-led-stereo-audio-level-indicator.jpg)
![Main view Main view](https://kamami.pl/66300-large_default/32-led-stereo-audio-level-indicator.jpg)
zł31.35 tax excl.
Stereo audio level indicator module. Equipped with 32 blue LEDs (16 per channel)
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Stereo audio level indicator module. There are 32 LEDs on the board (16 per channel) showing the level of the audio signal entering the module. The input is connected via a 2.54 mm connector. It is powered with the voltage from 8 to 12 V. Perfect as a lighting effect for an audio player.
Digital audio level indicator consisting of 56 LEDs per channel. Powered by a micro USB connector, it can work with audio players, telephones or computers or display the audio level on the basis of reading from the built-in microphone
Audio level indicator module in the form of a kit for self-assembly. Equipped with 32 red and blue LEDs
Audio level indicator module in the form of a kit for self-assembly. It is based on the LM3915 chip and has 10 red and yellow LEDs
An audio module with a DAC converter designed to work with the Raspberry Pi. Supports I2S/DSD/Coaxial input, Analog/Coaxial/Optical/I2S output, and has 384K/32Bit decoding function. DFRobot DFR0941
No product available!
Gravity: Voice Recorder Module is a sound recording module powered by 5V voltage. It can store sounds up to 10 seconds long. DFRobot SEN0197
Audio Analyzer is a module with sound analyzer based on the MSGEQ7 system. It divides the sound into seven frequency bands, and then allows you to read the peak levels of each band. It allows you to measure the sound in the following frequencies: 63Hz, 160Hz, 400Hz, 1kHz, 2.5kHz, 6.25kHz and 16kHz. DFRobot DFR0126
Bluetooth audio receiver module that allows wireless transmission of sounds. It is equipped with a PCB antenna and a 3.5 mm Jack audio connector
Class A power amplifier with two channels, 45 W. Built on the popular J. Hood design from 1969
This small breakout board couples an Electret microphone (100Hz–10kHz) with a 60x mic preamplifier to amplify the sounds of voice, claps, door knocks or any sounds loud enough to be picked up by a microcontroller’s analog-to-digital converter. Each breakout comes fully assembled and works from 2.7V up to 5.5V. BOB-12758
Audio player with HiFi amplifier in aluminum housing. It allows you to play files from USB memory, SD card, via the audio connector and Bluetooth. It has a built-in FM receiver
Audio module with 8 Ohm loudspeaker and 8002B amplifier. It can be used as a buzzer and also play high-quality sound. The volume is controlled by a potentiometer. DFRobot FIT0449
Expansion board compatible with STM32 Nucleo. Allows you to prototype solutions with digital microphones. STMicroelectronics X-NUCLEO-CCA02M2
Class D digital audio amplifier with Bluetooth 5.0 module. It has two channels with a power of 50 W and can work with speakers from 4 to 8 Ω. It is powered with the voltage ranging from 9 to 24 V
Analog audio level indicator in the form of a panel meter. Powered with AC or DC voltage from 6 to 12 V, it has a built-in backlight
No product available!
HiFi stereo tube amplifier based on 6J1 and 6P1 tubes. Designed for use with loudspeakers up to 3 W and an impedance of 4 Ω or 8 Ω
A module with an electret microphone and an amplifier that will allow you to detect a voice, a clap or a door slam using the analog output
Class D PAM8410 class D stereo digital audio amplifier. The system allows you to connect two speakers with an impedance from 4 to 8 Ω and a power of 15 W per channel
LM386 mono digital audio amplifier module. It has a voltage gain of 200 and is powered from 5V to 12V
Digital mono audio amplifier based on the HXJ8002 chip. It has one channel with a power of 3 W and can work with speakers from 2 to 8 Ω. It is powered with the voltage from 2 V to 5.5 V
Stereo audio level indicator module. Equipped with 32 blue LEDs (16 per channel)