![Three-way speakers crossover 900Hz 5000Hz 150W](https://kamami.pl/71291-large_default/three-way-speakers-crossover-900hz-5000hz-200w.jpg)
![Three-way speakers crossover 900Hz 5000Hz 150W](https://kamami.pl/71291-large_default/three-way-speakers-crossover-900hz-5000hz-200w.jpg)
zł10.52 tax excl.
Three-way crossover with a crossover frequency of 900 Hz and 5000 Hz. It works with speakers with an impedance of 5 to 8 Ω and offers power up to 150 W
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Three-way crossover with a crossover frequency of 900 Hz and 5000 Hz. It allows you to split the audio signal into three bands, which can then be connected to a bass, mid and tweeter with an impedance of 5 to 8 Ω. It offers power up to 200 W and allows you to reproduce the entire acoustic spectrum with high sound quality. It will be used in home and professional audio systems.
Stereo audio amplifier with a power of 40 W (2 x 20 W) powered with the voltage of 12 V. Equipped with an audio input in the form of two chinch sockets and an audio jack 3.5 mm input
Audio amplifier module with three output channels. It can be powered with the voltage from 12 to 24 V and has two outputs with a power of 50 W (left and right) and one with a power of 100 W (bass)
Stereo audio preamplifier based on the LM1036N chip. It allows you to control the bass, treble and volume level
No product available!
MP3 panel with a HiFi amplifier for installation in an audio device. It allows you to play files from USB memory, SD card, via the audio connector and Bluetooth. It has a built-in FM receiver
No product available!
Audio recorder module that allows for multiple recording and playback of sounds. Comes with a loudspeaker
Audio player with HiFi amplifier in aluminum housing. It allows you to play files from USB memory, SD card, via the audio connector and Bluetooth. It has a built-in FM receiver
Module with the WM8960 audio codec, which allows you to operate 1 W stereo speakers and two microphones via the I2S interface. Waveshare WM8960 Audio HAT
The Spectrum Shield enables your Arduino with the capability of splitting a stereo audio input into 7-bands per channel. You can then read the amplitude of each channel using the ADC on your Arduino allowing you to control everything from LEDs to motors, pumps to relays, or even fire, all with sound. DEV-13116
Class D digital audio amplifier with Bluetooth 5.0 module. It has two channels with a power of 50 W and can work with speakers from 4 to 8 Ω. It is powered with the voltage ranging from 9 to 24 V
MEMS SPM1423 digital microphone module with PDM modulation. It communicates via the I2S interface. M5Stack U089
Stereo audio amplifier based on the TPA3116D2 chip. It can be powered with the voltage from 12 to 26 V and has two outputs with a power of 120 W
MEMS MSM261S4030H0 microphone module designed to work with Sipeed MAix kits. The module is characterized by high sensitivity, low noise and low cost. Seeed Studio 107990153
WM8960 stereo codec module with driver for 1W class D speakers and headphones. It uses the I2S interface and the I2C bus to configure the system. SparkFun BOB-21250
Audio preamplifier based on NE5532 chips. Equipped with an input selector function. Display and remote control included
Digital stereo audio amplifier with Bluetooth 5.0 module. It has two channels with a power of 100 W and can work with speakers from 4 to 8 Ω. Powered with voltage from 5 to 24 V. 1002M
Audio amplifier module with three output channels. It can be powered with the voltage from 12 to 24 V and has two outputs with a power of 50 W (left and right) and one with a power of 100 W (bass)
No product available!
A stereo tube preamplifier based on 6K4 tubes. Designed for use with active speakers or an additional amplifier and passive speakers. FX-AUDIO Tube-03
No product available!
Class A power amplifier with one channel (mono) with the power of 10 W. Built on the popular design of J. Hood from 1969.
Audio module with DAC, stereo amplifier and display, designed to work with the Raspberry Pi. Pimoroni PIM484
Three-way crossover with a crossover frequency of 900 Hz and 5000 Hz. It works with speakers with an impedance of 5 to 8 Ω and offers power up to 150 W