Main view
search
  • Main view
  • Top view
  • Bottom view
ID: 1186173
5906623423873
€7.85
Tax included

€6.38 tax excl.

Board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores and a 5x5 RGB LED matrix. There is also 2 MB of QSPI flash memory on the board. The circuit can be programmed in C/C++ or MicroPython. Waveshare RP2040-Matrix

24h
Available
Available quantity: 2
Kamami is the official distributor of Waveshare displays, accessories and modules.
 

Free shipping

free shipping in Poland for all orders over 500 PLN

 

Same day shipping

If your payment will be credited to our account by 11:00

 

14 days for return

Each consumer can return the purchased goods within 14 days

Description

The board is equipped with the RP2040 microcontroller designed by the Raspberry Pi foundation. The system has two ARM Cortex M0+ cores operating at a frequency of up to 133 MHz and 264 kB of RAM. The microcontroller is not equipped with Flash memory, but on the board there is an external memory with a capacity of 2 MB connected via the QSPI interface.

p1186173-RP2040-Matrix-details-intro.jpg

1. USB typ C 5. LDO 3,3V 500mA RT9013-33GB
2. LED RGB 5x5 6. NOR-Flash 2 MB W25Q16JVUXIQ   
3. BOOT 7. RP2040
4. RESET                                   

In addition to the RP2040 system and Flash memory, the user has at his disposal a 3.3 V voltage stabilizer, Boot and Power buttons, USB type C connector for powering and programming the module and GPIO outputs, on which peripherals such as 12-bit ADC inputs, PWM, I2C, SPI and UART interface. An important element of the board is the RGB 5x5 LED matrix, which allows you to generate interesting lighting effects.

p1186173-RP2040-Matrix-details-9.jpg

The platform supports the popular MicroPython and C/C++ programming languages. Programs can be uploaded to the memory using the USB interface. The guide with examples of use is available on the product page.

Features

  • RP2040 microcontroller designed by Raspberry Pi
    • Two ARM Cortex-M0+ cores clocked up to 133 MHz
    • 264 kB onboard SRAM
  • LDO Stabilizer RT9013-33GB 3.3V 500mA
  • Built-in USB-C connector for programming and power
  • 20 x multifunctional GPIO pins
    • 4 x 12-bit ADC inputs with temperature sensor
    • 20 x PWM
    • 2 x UARTs
    • 2 x I2C
    • 2 x SPI
  • Power and Boot buttons
  • 25 RGB LEDs (5x5 matrix)
  • 2MB external flash memory
  • Supported programming languages: MicroPython and C/C++
  • Dimensions: 23.5 x 18mm
1186173

Data sheet

Microcontroller
RP2040
Flash memory
2 MB
Number of I/O
20
Ethernet
none
WiFi/BT module
No
Bluetooth module
No
MicroSD slot
No
Length
23,5 mm
Width
18 mm
USB connector type
USB type C

Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20

You might also like

Other products in the same category (16)

Shopping Cart
No Product in Cart