VisionCB-8M-ADV v.1.2 - carrier board for VisionSOM-8Mmini modules

Description

VisionCB-8M-ADV is an advanced base board for the VisionSOM-8Mmini module family. Together with the SoM module, it creates a complete programming platform similar to SBC. The board includes the most popular interfaces, such as USB, Ethernet, PCIe (M.2), RS485, CAN FD, HDMI, LVDS, MIPI-DSI, MIPI-CSI, audio codec, etc. A large variety of interfaces allows it to be used both as a prototype platform and as a stand-alone final product. The carrier board connects to the SoM via a standard SODIMM connector and is equipped with a Segger J-Link debugger and a Linux to USB vCOM serial console port.

Features

• Connector for the VisionSOM module: SODIMM200
• The board is compatible with VisionSOM series modules with i.MX 8M mini processors
• Built-in JTAG Segger J-Link interface
• GPIO/Serial connector 2x8-pin
• Ethernet socket 10/100/1000Mbit/s
• microSD card slot
• PCIe M.2 M Key slot (2242, 2260, 2280)
• CAN FD (3-pin connector)
• RS485 (3-pin connector)
• USB Host Connector (Type A)
• USB-OTG connector (micro-USB type B)
• HDMI output
• LVDS output
• 30-pin MIPI-DSI display connector
• 30-pin MIPI-CSI camera connector
• Mini Jack audio output and 3-pin speaker output
• Mini Jack microphone input
• Headphone output 40 mW/16 Ohm
• BTL speaker output 1 W/8 Ohm
• 4 buttons for user use
• Zero (reset) button
• Boot/recovery button
• 4 LEDs for user use
• 2 system LEDs
• Power supply via DC socket: 9-12V
• Operating temperature: 0 to 70°C
• Dimensions: 160 x 100 x 18 mm