SpaceCB-8Mplus-ADV v.1.2 - base board for SpaceSOM-8MPlus modules
ID: 1186159
zł362.85
Tax included
zł295.00 tax excl.
Base board for the SpaceSOM-8Mplus family of modules. Creates a complete development platform similar to the SBC. SoMLabs SpaceCB-8Mplus-ADV v.1.2
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Features
SpaceCB-8Mplus-ADV is an advanced base board for the SpaceSOM-8Mplus family of modules equipped with a Neural Processing Unit (AI/Machine Learning applications). Together with the SoM (System on Module), it forms a complete SBC-like development platform. It contains the most popular interfaces such as USB 3.0, Ethernet, PCIe 3.0 (M.2), RS485, CAN FD, HDMI, LVDS, MIPI-DSI, MIPI-CSI, audio codec, etc. The large variety of interfaces allows it to be used both as a complete development platform and as a standalone end product. The board connects to the SoM via a standard SODIMM connector and is equipped with a Segger J-Link debugger and a serial console port dedicated to debugging.
Features
- SoM SODIMM260 interface
- Segger J-Link JTAG built-in debugger
- Expansion connectors
- GPIO/Serial connector 2x20 pins (male, 2.54 mm)
- MicroSD connector dedicated to SD card
- Communication connectors
- PCIe connector (single lane) M.2 key M (2242, 2260, 2280)
- Ethernet 2x10/100/1000Mbit/s, RJ45
- 2x CAN FD 1x3 pin connector (male, 2.54 mm)
- Simplex RS485 1x3-pin connector (male, 2.54 mm)
- USB 3.0 connectors 1xType A
- USB C connector 1x
- 1x MicroUSB connector (console)
- Display and camera
- HDMI output HDMI connector
- LVDS output 2 x 22-pin FFC/FPC 0.5 mm connectors
- MIPI-DSI interface 1 x 30-pin FFC/FPC connector
- MIPI-CSI interface 2 x 30-pin FFC/FPC connector
- Audio
- Stereo headphone and microphone connector Mini Jack 4 pole
- Headphone output power 40 mW/16 Ohms
- BTL speaker output 1 W/8 Ohm
- User interface
- 4 user buttons
- 1 system button
- 4 user LEDs
- 3 system LEDs
- Power supply: DC 9 to 12 V connector
- Temperature range: 0 to +70°C
- Dimensions: 160 x 100 x 25 mm
1186159
You might also like
SpaceSOM series module with NXP i.MX8M plus 1.6 GHz processor (4 Cortex-A53 + Cortex-M7 cores), 2 GB RAM and 8 GB eMMC memory. SomLabs SLS35X8MPQC_1600C_02GR_08GE_0SF_E
zł510.76
24h
Available quantity: 48
Available
Other products in the same category (10)
Carrier board for VisionSOM-8Mmini modules with i.MX 8M mini processors from NXP. The board contains, among others: Ethernet, USB, PCIe, DSI, CSI connectors, buttons and user LEDs. SoMLabs VisionCB-8M-ADV v.1.2
zł362.85
24h
Available quantity: 46
Available
zł239.85
24h
Available quantity: 53
Available
VisionCB-6ULL-STD is a base plate for the VisionSOM-6UL (i.MX6 UL) and VisionSOM-6ULL (i.MX6 ULL) modules. The tile contains, among others Ethernet, USB connectors, connectors compatible with Arduino shields and Raspberry Pi hat, 5 buttons and 5 LEDs. VisionCB-6ULL-STD, SoMLabs
zł239.85
24h
Available quantity: 107
Available
zł239.85
24h
Available quantity: 16
Available
VisionCB-RT-STD is a base plate for VisionSOM-RT modules (i.MX RT). The tile contains, among others Ethernet, USB connectors, connectors compatible with Arduino shields and Raspberry Pi hat, 5 buttons and 5 LEDs. VisionCB-RT-STD, SoMLabs
zł178.35
24h
Available quantity: 46
Available
VisionCB-6ULL-IND is a base plate for VisionSOM-6UL (i.MX6 UL) and VisionSOM-6ULL (i.MX6 ULL) modules. The tile contains, among others Ethernet, USB connectors. VisionCB-6ULL-IND, SoMLabs
zł138.20
24h
Available quantity: 13
Available
StarCB-6ULL-STD v.1.1 is the base board for StarSOM-6ULL (i.MX6 ULL) modules. The board contains, among others Ethernet and USB connectors, connectors compatible with Raspberry Pi HATami, 5 buttons and 5 LEDs. SoMLabs StarCB-6ULL-STD v.1.1
zł178.35
24h
Available quantity: 48
Available
The OEM version of the measuring computer for the PHM / SHM application with the integrated 3D measuring head, forming a complete, autonomous node of the measuring system. The measuring head uses 6 2DoF / 3D sensors made in iMEMS technology with machine-learning coprocessors and compensating pressure and humidity sensors
zł9,900.00
Delivery date unknown
No product available!
VisionCB-x2L-STD v.1.2 is a base board for VisionSOM-V2L and VisionSOM-G2L modules. The board includes Ethernet, USB, CAN, RS485, MIPI-DSI, MIPI-CSI, 4 buttons and 4 LEDs. SoMLabs VisionCB-x2L-STD v.1.2
zł239.85
24h
Available quantity: 95
Available
VisionCB-RT1176-STD is a base board for VisionSOM-RT1170 modules (NXP i.MX RT1170 microcontrollers). The board includes Ethernet, USB, CAN, RS485, MIPI-DSI, MIPI-CSI, 5 buttons and 5 LEDs. SoMLabs VisionCB-RT1176-STD v1.2
zł239.85
24h
Available quantity: 48
Available
Base board for the SpaceSOM-8Mplus family of modules. Creates a complete development platform similar to the SBC. SoMLabs SpaceCB-8Mplus-ADV v.1.2