Best sellers

Adafruit 2348

Module with a 12 V relay and a timer. It allows you to turn the device on and off cyclically at a specified time using potentiometers. It can also operate in single trigger mode, which allows the device to be turned on after a signal has been applied for a specified period of time. The operating time can be adjusted from 1 s to 100 s or from 1 s to 15 min

Starter kit for the micro:bit educational module. The kit includes an expansion module with Grove connectors, Grove modules and the necessary accessories. Seeed Studio 114991970

CS-Mount lens. 12 mm focal length, 30° FoV, manual focus and adjustable aperture. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN040

A set of necessary tools needed to perform vehicle diagnostics. It consists of a CAN Bus module, an OBD II connector and the necessary wires. Seeed Studio 114991438

Motor with 25 mm diameter and 67 mm length, 47:1 metal gear, 12 V operating voltage, 0,3 A to 5,6 A power consumption, 210 RPM speed, 12 maximum torque and 48 CPR encoder. Pololu 4845

Small 10 DoF IMU module with 3-axis gyroscope and accelerometer (LSM6DSO), 3-axis magnetometer (LIS3MDL) and barometer (LPS22DF). It is equipped with an I2C interface, a voltage stabilizer and a voltage level converter. Pololu 2863

A programmable, retro-style console for the Raspberry Pi Pico, featuring a 96-LED 12x8 matrix, a speaker, and a vibration motor. The device features six control buttons and additional GPIO pins, allowing for project expansion and greater interactivity. Power is provided by three AA batteries housed in an ergonomic handle that also makes the console easier to hold. Kitronik 5347

The 3D TOF camera is a module that consists of the BL702 system and the Juyou 100x100 TOF sensor. It is a 3D sensor that allows you to measure distances up to 1.5 meters. It is equipped with a 1.14-inch LCD screen that allows real-time viewing of depth maps along with color maps. DFRobot SEN0581

Universal multimeter allows you to measure AC and DC voltage, AC and DC current, resistance, capacitance and frequency. Equipped with diode test, NCV and duty cycle measurement. Uni-T UT139B

LPS22DF digital barometer module. It enables pressure measurement in the range from 260 to 1260 hPa and communicates via I2C or SPI. Pololu 2898

Pololu high power miniature motor with carbon brushes. 210:1 gear motor, shaft speed 85 rpm, torque 2.5kg*cm. The motor has an extended shaft, which makes it easy to attach the encoder. Pololu 3054

Pololu high power miniature motor with carbon brushes. 150:1 gear motor, shaft speed 220 rpm, torque 1,8kg*cm. The motor has an extended shaft, which makes it easy to attach the encoder. Pololu 3053

A set for building an interactive robot based on the micro: bit module. It can be programmed using tools such as Mind+, Scratch, MakeCode and MicroPython. DFRobot MBT0021-EN

Flash Programmer for ARM and Cortex cores, Segger

This DIY kit allows you to create a compact and bright LED lamp using 9 diodes with a total intensity of approximately 16,000 mCd. Built-in resistors allow the system to be powered directly from a 5V power supply or from three AA batteries, ensuring flexibility and ease of use. Its simple design makes it ideal for soldering practice. Kitronik 2169

C-Mount lens and C-CS adapter. Variable zoom lens 4-12 mm long, FoV 87.2° (H), 39° (H), manual focus and adjustable aperture. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN048

Lan tester can easily read the correct pin configuration of 10Base-T cable, 10Base-2 cable, RJ45/RJ11 modular cables, 258A, TIA-568A/568B and Token Ring cable etc. by comparing one transmitting end to the corresponding receiving end. z28586

Lanberg’s network cable tester is a multifunctional device for testing wires of ICT networks. z27375