Best sellers

Dual Full-Bridge Driver, Power SO20, STM, RoHS

Module with e-Paper display, 3.52" diagonal and 360x240 px resolution. Communication via SPI interface. Waveshare 3.52inch e-Paper HAT

These 17 mm long aluminum adapters convert a 3 mm diameter shaft to a 12 mm hex shaft that compatible with many common hobby RC wheels. The set includes two adapters, two M4 screws for securing wheels to the adapters, four M3 set screws for securing the adapters to motor shafts, and one 1.5 mm Allen wrench for use with the set screws.

15.6" portable touch screen monitor. Equipped with HDMI and USB Type-C interface for image display and USB Type-C for touch screen operation. High resolution 1920x1080 pixels and HDR technology. Waveshare 15.6inch FHD LCD (B) (EU )

ARK terminal connector spring 2-pin, pitch 3.5 mm, non-detachable.

IPS LCD display with a diagonal of 7" and a resolution of 1024x600 pixels, equipped with a capacitive touch panel. Communicates via the LVDS interface. Riverdi RVT70HSLNWC00

IPS LCD display with a diagonal of 5" and a resolution of 800x480 pixels, equipped with a capacitive touch panel. Communicates via the RGB interface. With a mounting frame. Riverdi RVT50HQTFWCA0

This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 9 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.

A set with four cameras with a resolution of 64 MP and an expansion module for Raspberry Pi, Jetson Nano and Xavier NX, which allows you to simultaneously connect four cameras to the minicomputer. ArduCAM B0402

A set containing a set of connectors, jumpers and buzzer for the A-Star platform. Polol 3110

A set with a 64 MP camera and an Ethernet adapter designed for minicomputers Raspberry Pi and Jetson Nano. It allows you to extend the connection range between the minicomputer and the camera up to 15 m. ArduCAM B0399U6248

Module with 2 relays SRD-05VDC-SL-C with a load up to 10 A. The board is equipped with a Grove connector and is controlled by a digital signal. Seeed Studio 103020132

Arduino Starter Kit with Uno board

Module with 6-position DIP switch. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 111020043

QLED display with a diagonal of 7" and a resolution of 1024x600 pixels. Equipped with a capacitive touch panel and a 40-pin FPC connector. HDMI adapter included. Waveshare 70H-1024600-QLED-CT-B

Computer with Intel Celeron N5105, 8 GB RAM and 64 GB eMMC. Equipped with Wi-Fi 6, Bluetooth 5.2, Ethernet and Intel UHD Graphics. Supports Windows 10 and Linux. DFRobot DFR0981

modTSL2561 is a module containing a light sensor TSL2561; communication with the system takes place using the I2C bus

Accelerometer and gyroscope module, allows measurement of acceleration in the range of +/- 16 G and angular velocity in the range up to +/- 2000 dps. modMPU6500 (GY-6500)

GY-346 is a module with a digital acceleration sensor (accelerometer) ADXL346; communication on the I2C / SPI bus

GY-9250 is a 9 Degrees of Freedom (9DoF) module with the InvenSense MPU-9250 chip. It has a built-in gyroscope, accelerometer and magnetometer.