Best sellers

A digital multimeter that is used to measure electrical quantities such as AC and DC voltage, AC and DC current, resistance, capacitance and frequency, and temperature. It has an LCD display and backlight, as well as functions for automatic range change, measurement stop and circuit continuity test. It has a built-in Bluetooth module that allows measurements to be tracked on a smartphone. Aneng AN9002

A probe for measuring AC and DC currents up to 650 A. It operates in a bandwidth of up to 400 Hz and can be connected to an oscilloscope via a BNC connector. Hantek CC-650

Easy-to-install indicator signaling the operation of devices or systems, with an attached resistor and adapted to work with 12V supply voltage

Pad dedicated to 3D printing. It has dimensions of 220x220 mm and is covered with a PEI coating on both sides

Pad dedicated to 3D printing. It has dimensions of 220x220 mm and is covered with a PEI coating on one side

A probe for measuring AC and DC currents up to 65 A. It operates in a bandwidth of up to 20 kHz and can be connected to an oscilloscope via a BNC connector. Hantek CC-65

4-channel digital oscilloscope with feature set for automotive diagnostics. It offers a frequency bandwidth of 70 MHz and samples up to 1 GS/s. It can work with Windows computers. Hantek 6074BE Kit IV

4-channel digital oscilloscope with feature set for automotive diagnostics. It offers a frequency bandwidth of 70 MHz and samples up to 1 GS/s. It can work with Windows-based computers. Hantek 6074BE Kit III

4-channel digital oscilloscope with feature set for automotive diagnostics. It offers a frequency bandwidth of 70 MHz and samples up to 1 GS/s. It can work with Windows-based computers. Hantek 6074BE Kit II

4-channel digital oscilloscope with feature set for automotive diagnostics. It offers a frequency bandwidth of 70 MHz and samples up to 1 GS/s. It can work with Windows computers. Hantek 6074BE Kit I

Advanced signal generator. It has two independent signal channels. It offers a sampling rate of 300 MSa/s and allows the generation of signals with different frequencies in the range up to 25 MHz. Hantek HDG3022B

Two-component silicone filler 037 cross-linking in the addition system. The silicone gel is crystal clear, resistant to UV light, so it is an excellent material for LED applications. AG Termopasty ART.AGT-315

Iridium 9603N satellite receiver module. It allows you to send and receive short messages from anywhere on Earth and works far beyond the range of WiFi and GSM networks. SparkFun WRL-14498

Universal charger with dual charging sockets designed for Li-Ion, LiPo, LiFe, LiHV, Pb and Ni-MH batteries. It has a power output of up to 500 watts, allowing up to 25 amps of charging current. ToolkitRC M6D

Cables dedicated to MyoWare 2.0 muscle tension sensors. It allows you to connect the electrode with the plate in the event that it must be located at a distance from the sensor. SparkFun KIT-19627

Surface loudspeaker with an impedance of 4 Ω and a power output of 10 W. It is constructed with a coil attached to a pad that conducts vibrations. SparkFun COM-19102

A small gripper designed for small robotic arms. It is designed for use with a servo (not included). The kit is easy to assemble. SparkFun ROB-13176

Two-component resin for potting and encapsulating components in electronics, incl. for making castings and filling to protect electrotechnical elements. AG Termopasty ART.AGT-258

AG Double-sided adhesive, thermally conductive thermopads are used where it is not possible to use thermally conductive paste. They are very flexible. They are characterized by high compressibility which ensures a good fit to elements that require cooling. AG Termopasty ART.AGT-130

The AM2315C is an advanced packaged temperature and humidity sensor offering easy integration with microcontrollers thanks to its 2.5V-5.5V power supply and standard I2C interface, providing greater resistance to external conditions than typical SHT sensors, with measurement accuracy of ±2% RH and ±0.3°C