Best sellers

Base board prepared for Rasberry Pi CM4 modules. It integrates the PoE circuit, it is equipped with connectors for all available interfaces, additionally on the board there is an RTC system and a fan connector. Waveshare Compute Module 4 PoE Board

Module with a touch keyboard (12 buttons) based on the ATtiny1616 microcontroller. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 101020636

Sn99,3Cu0,7 36894 1,00mm/14g solder, produced by Cynel-Unipress, is a lead-free, rosin-based alternative to traditional fillers, meeting ISO 9453:2014 standards and the RoHS directive, ideal for professional and amateur soldering applications

Module with 6-position DIP switch. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 111020043

Neodymium rectangular magnet with dimensions of 15x6mm a and a height of 3 mm.

The symmetrical power supply based on LM317 and LM337 offers a DC output in the range of 1.3-25 V with a power of 25W and a current of up to 1A. Equipped with a resettable fuse for overload protection, it is compact with dimensions of 62 x 59 x 30 mm.

The LM317 + LM337 Symmetrical Power Supply provides stable and smoothly regulated symmetrical voltage for electronic and laboratory applications. Suitable for powering audio systems, preamplifiers and test projects where stable, regulated symmetrical voltage is essential. Requires consideration of proper cooling to maintain optimal operating conditions

Module with 8 relays SSR G3MC202P with a load up to 2 A. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 103020136

Sn99Ag0.3Cu0.7 EVO solder, manufactured in accordance with the EN ISO 9453:2014 standard, contains EVO rosin halide flux, ideal for professional soft soldering, meeting the requirements of the RoHS2 directive and guaranteeing cleanliness thanks to the low content of other elements

Neodymium rectangular magnet with dimensions of 15x5mm a and a height of 3 mm.

Cynel Sn62Pb36Ag2 PRO solder filler in violet 1.00mm 10g is a high-quality soldering material, ideal for electronics and electrical engineering specialists, guaranteeing durable and conductive connections thanks to the silver content and the improved PRO flux formula

Neodymium rectangular magnet with dimensions of 15x7mm a and a height of 2 mm.

This paste is an ideal choice for applications where reliable and effective soldering is required, exceeding the capabilities of traditional rosin.

Development kit with ESP32-S3 module. It is equipped with a dual-core Xtensa LX7 processor and Wi-Fi communication. It has a built-in 2-inch IPS capacitive touchscreen and numerous sensors, including a 30 MP GC0308 camera with proximity sensor, a 6-axis BMI270 position sensor and a BMM150 magnetometer. M5stack K128

Module with a BME680 sensor that allows you to measure temperature, humidity, pressure and gas detection. The board is equipped with a Grove connector and communicates via I2C and SPI. Seeed Studio 101020513

The most popular Sn60Pb40 SW26 solder is a high-quality lead product with SW26 flux, intended for professional soldering in electronics and electrical engineering, meeting the EN ISO 9453:2014 standard

The two-channel DDS signal generator with a frequency of 60MHz enables the generation of various waveforms, from a sine wave with a range of up to 60MHz to a pulse wave with a range of up to 6MHz. The device is distinguished by a precise frequency resolution of 0.01uHz, stability of 1ppm/3h and 12-bit waveform resolution. Junctek JDS6600-60

A handy generator of voltage signals 0-12 V and current signals 0-24 mA. Equipped with an IPS LCD display. It is powered by a built-in battery or USB port. MR9270S

A handy generator of 0-12 V voltage and 0-24 mA current signals with HART protocol support. Equipped with an IPS LCD display. It is powered by a built-in battery or USB port. MR9270S+HART

Neodymium rectangular magnet with dimensions of 15x6mm a and a height of 5 mm.