Best sellers

TCS34725 RGB Color Sensor is a color sensor TCS34725 controlled by the I2C interface. It is powered by voltage in the range of 3.3 ... 5V and is intended for Arduino-compatible boards. DFRobot SEN0212

Precise electronic balance with a measuring range of up to 500 g. It enables measurement with an accuracy of 0.1 g

Module with waterproof barometer and MS5837 temperature sensor. It enables pressure measurement in the range from 300 to 1200 hPa and communicates via I2C

Camera module based on ESP32 integrated with 8 MB of PSRAM. The camera is equipped with an OV3660 sensor with a resolution of 3 MPx and WiFi communication. M5Stack U082

This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 9.96:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.

The expansion board with the LoRa SX1262 module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. Waveshare Pico-LoRa-SX1262-868M

3.2" IPS LCD Display. It is equipped with an HDMI interface for image display and has a resolution of 480x800 pixels. Waveshare 3.2inch HDMI LCD (H)

Air speed sensor module based on the FS3000-1005 chip. The board is equipped with Qwiic connectors. SparkFun SEN-18377

Module with DC motor driver DRV8256E. It can work with motors supplied with the voltage from 4.5 to 48 V and the current consumption up to 1.9 A. Pololu 4038

Adafruit Universal Thermocouple Amplifier MAX31856 is an amplifier module for thermocouples. It was based on the MAX31856 chip. The module is fitted with K, J, N, R, S, T, E or B thermocouples. The SPI interface is used for communication. Adafruit 3263

Power module designed to work with LilyPad boards. It is equipped with a switch and a CR2032 battery socket. SparkFun DEV-13883

Single-cell lithium battery ER14250 for devices using power sources in the form of a 1 / 2AA 3.6V battery

Switching power supply from MEAN WELL 15W, 5V DC output voltage and 3A output current. Mounting on a DIN rail. Built-in overload and short-circuit protection. MDR-20-5

Switching power supply from MEAN WELL, power 20W, output voltage 12VDC and output current 1.67A. Mounting on a DIN rail. Built-in overload and short-circuit protection. MDR-20-12

A miniature camera module with a 5MP OV5647 sensor dedicated to the Raspberry Pi. Designed for projects where image size and quality are important. Waveshare RPi FPC Camera (B)

3-port HUB module with USB 2.0 interface with RJ45 connector with PoE function. Designed for Raspberry Pi Zero. Case included. Waveshare PoE-ETH-USB-HUB-BOX

Module with a 4-element 14-segment display. The board is equipped with a Qwiic connector and communicates via the I2C interface. SparkFun COM-18565

Color Sensor, complete color detector

This small synchronous switching step-down (or buck) regulator takes an input voltage from 4 V to 36 V and efficiently reduces it to 3.3 V. The board measures only 0.7″ × 0.7″ yet delivers a typical continuous output current of up to 2.6 A and features reverse voltage protection.

This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 75.81:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.

Key specs at 6 V: 290 RPM and 40 mA with no load, 17 oz-in (1.2 kg-cm) and 0.7 A at stall.