Best sellers

Flexible 2.13" black and white e-Paper display with 212x104 px resolution. SPI interface. No PCB. Waveshare 2.13inch e-Paper (D)

The S9V11MACMA switching step-up/step-down regulator efficiently produces a finely adjustable output between 2.5 V and 9 V whether it is higher or lower than the input voltage, which can range from 3 V to 16 V. The regulator also has a precision-adjustable low-voltage cutoff with hysteresis that can be used to prevent battery over-discharge.

A set of 10 drill bits for precision work with diameters 0.6mm-2.3mm, RoHS

Rail with Micro HDMI adapters for mounting Raspberry Pi 4 minicomputers model B in the housing. ArduCAM U6128

The S9V11F5S6CMA switching step-up/step-down regulator efficiently produces a fixed 5 V (default) or 6 V (selectable) output whether it is higher or lower than the input voltage, which can range from 2 V to 16 V. (Note: minimum start-up voltage is 3 V, but it operates to 2 V after that.)

The 32L4R9IDISCOVERY kit is a complete demonstration and development platform for STMicroelectronics Arm® Cortex^®-M4 core-based STM32L4R9AI microcontroller.

Kit with 2.13" e-Paper display with passive power supply via NFC, NFC module and microSD card. Waveshare 2.13inch NFC e-Paper Eval Kit

Connect your Arduino-compatible to the Internet with this WiFi shield that features the FCC-certified ATWINC1500 module from Atmel. Adafruit 3653

Strong & Durable Poly Carbonate Case for Odroid-HC1, half-transparent.

DEV-14352

IoT module with ATmega328P and BLE4.1 microcontroller. Compatible with the Bluno series, it can be programmed in the Arduino IDE. DFRobot DFR0492

The STM32 Nucleo-144 boards provide an affordable and flexible way for users to try out new concepts and build prototypes by choosing from the various combinations of performance and power consumption features, provided by the STM32 microcontroller. For the compatible boards, the SMPS significantly reduces power consumption in Run mode.

The X-NUCLEO-LPM01A is a 1.8 V to 3.3 V programmable power supply source with advanced power consumption measurement capability

NUCLEO series starter kit equipped with a STM32WL55JC microcontroller (256 KB Flash, Cortex-M4/M0+), with a built-in STLINK-V3E programmer-debugger, equipped with Arduino-compatible connectors

The P-Star 45K50 Mini SV is a small programmable module featuring Microchip’s PIC18F45K50 microcontroller. It packs a Micro-USB interface and 30 digital input/output pins onto a board measuring 2″ × 0.7″ and ships preloaded with a USB bootloader, so no external programmer is required.

Arducam USB shield is a module that allows you to connect some ArduCam cameras to a PC or minicomputers, eg Raspberry Pi, BeagleBone etc. The module supports most cameras with a serial interface that have a resolution of 0.3 ... 14 MPix. Attached to the module are appropriate libraries that facilitate image processing, eg using OpenCV software. ArduCam B0095

PROLINE glue gun with a diameter of 11 mm and power of 200 W

Camera module with Sony IMX219 sensor works with all versions of Raspberry Pi. The camera is equipped with a matrix with a resolution of 8 MPx, the maximum video resolution is 1080p. ArduCAM B0102

Orange filament ABS 1.75 mm 750g