FireBeetle Board 328P - IoT module with ATmega328P and BLE4.1 microcontroller
ID: 566837
5902186313217
zł90.61
Tax included
zł73.67 tax excl.
IoT module with ATmega328P and BLE4.1 microcontroller. Compatible with the Bluno series, it can be programmed in the Arduino IDE. DFRobot DFR0492
Description
IoT module from the FireBeetle series, which combines Bluetooth Low Energy 4.1 with the ATmega328P microcontroller. It is compatible with the Bluno series (BLE 4.0) and is equipped with a stable Bluetooth 4.1 DIALOG chip, supporting the maximum transmission rate of 4Kbyte / s and low power consumption (25 uA). It can be directly used for low power consumption applications such as wearable and IoT devices. The module supports KISS connections (proximity connections) and the P2P function (wireless programming). It can be powered by a USB port or by a battery. The connectors have a set of GPIO pins, analog inputs and communication interfaces such as SPI, I2C and UART. It can be programmed using the Arduino IDE. Full documentation is available on the product page.
Features
- Support for central and peripheral BLE 4.1 switch
- Support for data transmission via a serial port
- Support Bluetooth peer to peer (P2P) wireless programming
- Supports multiple Bluetooth 4.1 devices (Max: 4)
- Arduino Bluetooth Library Support (Multiple Bluetooth Connection Support)
- Bluetooth low power consumption: 25 uA standby current
- KISS connection support
- Bluetooth firmware update
- Microcontroller: ATmega328P
- Bootloader: Arduino Pro or Pro Mini, ATmega328 (3.3V, 8MHz)
- 4Kbyte / s maximum bitrate
- Maximum discharge current: 600 mA (3.3V LDO output)
- Maximum charging current: 400 mA
- GPIO: 14
- Analog inputs: 6
- SPI: 1
- I2C: 1
- UART: 1
- LED: D13
- Programmed in the Arduino IDE
- MicroUSB power supply: 3.7 to 5.5 V
- Battery powered: 3.7V
- Dimensions: 58 x 29 mm
Kit contains
- FireBeetle Board 328P module
- 2 x 18-pin goldpin male connector
- 2 x 18-pin goldpin female connector
566837
Data sheet
- Microcontroller
- ATmega328
- Core
- AVR
- Frequency
- 8MHz
- Flash memory
- 32kB
- RAM
- 2kB
- EEPROM memory
- 1kB
- Number of digital pins
- 14
- Number of PWM channels
- 6
- Ilość wejść analogowych
- 6
- ADC
- 1x 10bit
- DAC
- none
- CAN
- none
- USB
- 1
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- Yes
- GSM/GPRS module
- No
- Logic voltage
- 3,3 V
- MicroSD slot
- No
- Supply voltage min
- 3,7 V
- Supply voltages max
- 5,5 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
DFRobot FireBeetle series is the low-power consumption micro-controller intentionally designed for Internet of Things (IoT). The series micro-controllers aims at IoT node of low-power consumption, attending to build the IoT hardware platform quickly and conveniently. DFR0482
zł25.42
24h
Available quantity: 2
Available
The module with the SX127x 433 MHz system for LoRa communication, designed for FireBeetle boards. It communicates via the SPI interface. DFRobot TEL0121
zł93.69
Delivery date unknown
No product available!
Module with a black and white OLED display with a resolution of 128x64 px, designed for FireBeetle plates. It communicates via the I2C interface. DFRobot DFR0507
zł63.00
24h
Available quantity: 2
Available
Cable with USB typ A and microUSB typ B connectors, cable length 1 m. LANBERG CCP-MUSB2-AMBM-W-1M
zł3.21
24h
Available quantity: 22
Available
Cable with USB typ A and microUSB typ B connectors, cable length 1.8 m. LANBERG CA-USBM-10CC-0018-BK
zł4.00
24h
Available quantity: 24
Available
Cable with USB typ A and microUSB typ B connectors, cable length 1.8 m. LANBERG CA-USBM-10CC-0018-W
zł4.06
Delivery date unknown
No product available!
Cable with USB typ A and microUSB typ B connectors, cable length 1 m. LANBERG CA-USBM-10CC-0010-BK
zł3.48
24h
Available quantity: 23
Available
Other products in the same category (12)
Plate for applications in the area of Internet of Things (IoT). The module was based on the ESP8266 system, which integrates WiFi, TCP / IP communication, 32-bit MCU, 10-bit ADC and many interfaces such as HSPI, UART, PWM, I2C and I2S. DFrobot DFR0489
zł43.25
24h
Available quantity: 2
Available
Development board based on the ESP32-WROOM-32E-N16R2 module, equipped with 16MB Flash and 2MB PSRAM, ideal for projects with a graphical user interface. It supports WiFi, Bluetooth, numerous peripheral interfaces (UART, I2C, SPI, I2S, DAC) and two power supply modes - USB-C and 3.7V battery - with an automatic switching function. Thanks to its compact dimensions, built-in PCB antenna and support for Arduino IDE, ESP-IDF and MicroPython, it is perfect for IoT applications, automation and smart sensors. DFRobot DFR1139
zł67.87
24h
Available quantity: 3
Available
Development board with ESP32-S3-WROOM-1-N16R8 module. It is equipped with the OV2640 camera, making it ideal for applications such as image recognition. It offers a large memory capacity (8 MB PSRAM and 16 MB Flash memory) and a rich set of communication interfaces. DFRobot DFR0975
zł87.65
24h
Available quantity: 2
Available
Development board based on the ESP32-S3-WROOM-1-N4 module, equipped with a 240 MHz Xtensa® LX7 processor, offering support for WiFi and Bluetooth 5.0, making it an ideal solution for IoT and AIoT projects. The module supports a wide range of peripheral interfaces and programming methods, such as Arduino IDE, ESP-IDF or MicroPython,. Thanks to the built-in AI acceleration, the board is perfect for applications such as voice recognition, text recognition or sensor data processing. DFRobot DFR1145
zł55.41
24h
Available quantity: 3
Available
Development board with ESP32-S3-WROOM-1-N16R8 module. It is equipped with the OV2640 camera, making it ideal for applications such as image recognition. It offers a large memory capacity (8 MB PSRAM and 16 MB Flash memory) and a rich set of communication interfaces. DFRobot DFR0975
zł93.95
24h
Available quantity: 1
Available
The low-power consumption micro-controller intentionally designed for Internet of Things (IoT) projects. The board integrates a Dual-Core ESP-WROOM-32 module, which supports MCU and Wi-Fi &Bluetooth dual-mode communication. DFR0478
zł54.07
24h
Available quantity: 6
Available
A development board based on a dual-core RISC-V 400 MHz processor, supporting AI instructions, MIPI-CSI/DSI interfaces, and enabling image and voice processing. With an integrated ESP32-C6 module, it offers Wi-Fi 6 and Bluetooth 5 connectivity, as well as a USB OTG interface, microphone, TF slot, and 32 MB PSRAM for advanced IoT and AI applications. Its compact size and rich features make it ideal for smart cameras, interactive displays, and robotics. DFRobot DFR1172
zł60.43
24h
Available quantity: 2
Available
Board for applications in the area of the Internet of Things (IoT). The module is based on the ESP-WROOM-32E system with 240 MHz clock, equipped with 4 MB Flash and 520 KB SRAM, as well as WiFi and Bluetooth communication. DFRobot DFR0654
zł50.44
24h
Available quantity: 7
Available
Board for applications in the area of the Internet of Things (IoT). The module is based on the ESP-WROOM-32E system with 240 MHz clock, equipped with 4 MB Flash and 520 KB SRAM, as well as WiFi and Bluetooth communication. DFrobot DFR0654-F
zł66.32
24h
Available quantity: 3
Available
Development board based on the ESP32-WROOM-32UE-N16R2 module, equipped with 16MB Flash and 2MB PSRAM, ideal for projects with a graphical user interface. It supports WiFi, Bluetooth, numerous peripheral interfaces (UART, I2C, SPI, I2S, DAC) and two power supply modes - USB-C and 3.7V battery - with an automatic switching function. Thanks to its compact dimensions, external antenna and support for Arduino IDE, ESP-IDF and MicroPython, it is perfect for IoT applications, automation and intelligent sensors. DFRobot DFR1140
zł69.43
24h
Available quantity: 3
Available
A compact IoT board with a 160 MHz RISC-V processor, offering support for Wi-Fi 6, Bluetooth 5, Zigbee 3.0, Thread 1.3 and Matter. With a built-in lithium battery charger and voltage monitoring function, it is ideal for mobile and energy-saving applications. The board can act as both an end device and a network gateway, making it extremely versatile in modern smart home systems. DFRobot DFR1117
zł23.57
24h
Available quantity: 4
Available
Energy-efficient development board with a 32-bit RISC-V 160 MHz processor, designed for smart IoT and home automation applications. It supports modern communication protocols such as Wi-Fi 6, Bluetooth 5, Zigbee 3.0, Thread 1.3 and Matter, which allows easy integration with smart home systems. Thanks to compatibility with Arduino IDE, MicroPython and Gravity and Fermion sensors, the board offers great flexibility and ease of implementation in various projects. DFRobot DFR1075
zł28.67
24h
Available quantity: 3
Available
IoT module with ATmega328P and BLE4.1 microcontroller. Compatible with the Bluno series, it can be programmed in the Arduino IDE. DFRobot DFR0492