Best sellers

Driver for three-phase BLDC motors based on the TMC6300 system from Trinamic. It allows you to control the movement of drives with a voltage of 2 to 11 V and a current consumption of up to 2 A. SparkFun ROB-21867

16-channel I/O port expander module controlled by the I2C interface. The module is based on the MCP23017-E/SS system.

Micro digital servo with metal gear. It has a range of motion of 180°. Perfect for controlling a small robotic arm or walking robot. Waveshare WP90

The hex wrench set offers 9 durable CrV tools in various sizes, from 2 mm to 10 mm, with ball ends and a 25˚ working angle. This is a complete set for professionals and DIY enthusiasts, enabling precise tightening and loosening of screws in a variety of applications. Vorel - 56477

Solder alloy Sn60Pb40 with a diameter of 1.0 mm and a weight of 100 g intended for soldering work in electronics and electrical engineering. It is used for mounting standard through-hole components, repairs, and soldering surfaces with various metallic coatings. The alloy composition provides good wettability and conductivity, which translates into durability and quality of solder joints.

I2C-UART converter module with two UART output interfaces. Configuration of I2C addresses allows you to connect up to 4 such modules to one controller, which means extending the board\'s capabilities by 8 UART interfaces. DFRobot DFR0627

The YT-2370 Yato inflator gun is a tool for tire inflation, equipped with a pressure gauge for monitoring air pressure. It features an aluminum body with a non-slip grip and a 440 mm hose. The maximum working pressure is 0.8 MPa.

Module with three voltage analog outputs ranging from 0 to 10 V. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in an industrial housing. Wellpro WP3079ADAM

Pololu 4811 is a set of two JST SH 2-pin side-entry adapters that enable connecting JST SH wires to breadboards and prototype circuits. Thanks to the standard 2.54 mm pitch and the side-entry connector layout, the module facilitates integration in projects with limited mounting space.

Step Down converter module with an output voltage of 5 V and a maximum current of 2x2,5 A. The board is equipped with four USB connectors

Module with a black and white OLED display with a diagonal of 1.3". It has a resolution of 128x64 pixels and a SH1107 controller. Communication with the module is carried out via the I2C or SPI interface. WSH 1.3inch OLED Module (C)

CMX-ADAPTER is a protection board dedicated to Raspberry Pi CM4 and CM5 modules, designed for intensive use and repeated connection with base expansion boards. It facilitates integration and protects connectors from mechanical damage.

Step-Up DC-DC converter module. It has an input voltage of 1.3 to 16 V, an output voltage of 6 V and a maximum input of up to 2 A. Pololu 4942

Permanent cylindrical neodymium magnet with a diameter of 18 mm and a height of 5 mm. Set of 5 pcs

Patchcord Lanberg Cat. 6 with Fluke Passed certification is a guarantee of the highest quality and reliability, enabling an optimal network connection compatible with various network devices in any environment. Lanberg PCF6-10CC-1500-S

Power Cable for Notebook Akyga AK-RD-02A Eight CCA CEE 7/16 / IEC C7 3 m. Akyga AK-RD-02A

USB power cable, 80 cm long, with a 3.5 x 1.35 mm plug, is used to power devices such as speakers or flashlights and is compatible with charging phones. Akyga AK-DC-03

ACS724LLCTR-30AB current sensor module with a DC and AC measurement range from -30 to +30 A. It communicates via an analog interface. Pololu 4047

A small module with a GY-PAJ7620U2 gesture detection sensor. Can recognize 9 gestures. Communication via the I2C interface.